
NETWORTH, INC.

UTP32A/UBUTP32A

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      8/16-bit ISA
Topology      Linear Bus
Wiring Type   Unshielded twisted pair
Boot ROM      Available

[Image]

                              NIC EPROM RESET

                    Function                                 W1

       Compatibility mode enabled                    Pins 1 & 2 closed

      Enhanced mode enabled                         Pins 2 & 3 closed

            Note:Compatibility mode should be enabled when the NIC is
            installed in main board slot 0, or if system NIC is installed
            in utilizes an earlier model Intel processor.

[Image]

                             DIAGNOSTIC LED(S)

    LED         Color        Status                 Condition

    LED1        Green          On             data is being received

    LED1        Green          Off          data is not being received

    LED2         Red           On         Twisted pair reversed polarity,
                                                card compensating

    LED2         Red           Off              Twisted pair proper
                                           polarity/10BaseT not in use

    LED3        Green          On           data is being transmitted

    LED3        Green          Off        data is not being transmitted

    LED4        Yellow         On              10BaseT port in use

    LED4        Yellow         Off           10BaseT port not in use

    LED5        Green          On             Link integrity exists

    LED5        Green          Off            Link integrity broken

    LED6        Yellow         On           Network collision detected

    LED6        Yellow         Off               Normal operation

  Note:LED5 is only functional when link integrity is enabled

