
NETWORK INTERFACE TECHNOLOGY CORPORATION

ETHERPRO II

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      16-bit ISA
Topology      Linear Bus, Star
Wiring Type   Unshielded twisted pair

              RG58A/U 50ohm coaxial

              AUI transceiver via DB-15 port
Boot ROM      Available

[Image]

                          BASE I/O ADDRESS SELECT

              Address Range                              J1

            Software configured                 Pins 1 & 2 closed

                     360h                        Pins 3 & 4 closed

                     340h                        Pins 5 & 6 closed

                     320h                        Pins 7 & 8 closed

                     300h                        Pins 9 & 10 closed

                     2A0h                       Pins 11 & 12 closed

                     280h                       Pins 13 & 14 closed

                     240h                       Pins 15 & 16 closed

                     220h                       Pins 17 & 18 closed

  Note: These settings apply when the LAN card is not in ELNK/16BIT
  compatibility mode.

                          BASE I/O ADDRESS SELECT

              Address Range                              J1

            Software configured                 Pins 1 & 2 closed

                     350h                        Pins 3 & 4 closed

                     330h                        Pins 5 & 6 closed

                     310h                        Pins 7 & 8 closed

                     300h                        Pins 9 & 10 closed

                     2E0h                       Pins 11 & 12 closed

                     2A0h                       Pins 13 & 14 closed

                     280h                       Pins 15 & 16 closed

                     250h                       Pins 17 & 18 closed

  Note: These settings apply when the LAN card is in ELNK/16BIT
  compatibility mode.

                     BASE MEMORY ADDRESS CONFIGURATION

              Address Range                              J3

            Software configured                 Pins 1 & 2 closed

                   Disabled                      Pins 3 & 4 closed

                    DC000h                       Pins 5 & 6 closed

                    D8000h                       Pins 7 & 8 closed

                    D4000h                       Pins 9 & 10 closed

                    D0000h                      Pins 11 & 12 closed

                    CC000h                      Pins 13 & 14 closed

                    C8000h                      Pins 15 & 16 closed

  Note: These settings apply when the LAN card is not in ELNK/16BIT
  compatibility mode.

                        BASE MEMORY ADDRESS SELECT

              Address Range                              J3

            Software configured                 Pins 1 & 2 closed

                   Disabled                      Pins 3 & 4 closed

                    DC000h                       Pins 5 & 6 closed

                    D8000h                       Pins 7 & 8 closed

                    CC000h                       Pins 9 & 10 closed

                    C8000h                      Pins 11 & 12 closed

  Note: These settings apply when the LAN card is in ELNK/16BIT
  compatibility mode.

                            COMPATIBILITY MODE

                   Mode                                  J4

             Software configured                 Pins 1 & 2 closed

                 N2000 (C & T)                    Pins 3 & 4 closed

                  N2000 (STD)                     Pins 5 & 6 closed

                  N1000 TURBO                     Pins 7 & 8 closed

                  03EBT/13EBT                    Pins 9 & 10 closed

                 ELNKII/16BIT                    Pins 11 & 12 closed

                             INTERRUPT SELECT

                   IRQ                                   J2

            Software configured                 Pins 1 & 2 closed

                    IRQ15                        Pins 3 & 4 closed

                    IRQ11                        Pins 5 & 6 closed

                    IRQ10                        Pins 7 & 8 closed

                     IRQ7                        Pins 9 & 10 closed

                     IRQ5                       Pins 11 & 12 closed

                     IRQ4                       Pins 13 & 14 closed

                     IRQ3                       Pins 15 & 16 closed

                   IR/FONT>                     Pins 17 & 18 closed

[Image]

                         DIAGNOSTIC LED(S)

    LED        Color      Status               Condition

    LED1       Green       Off            No link established

    LED1       Green        On             Link established

    LED1       Green     Blinking       Data is being received

    LED2        Red        Off              Polarity normal

    LED2        Red         On             Polarity reversed

    LED2        Red      Blinking      Data is being transmitted

