
XIRCOM, INC.

NETWAVE ACCESS POINT FOR ETHERNET

NIC Type               Proprietary wireless
Chip Set               Unidentified
Maximum Onboard Memory 512KB SRAM/256K flash RAM
Data Bus               PCMCIA Type II
Network Transfer Rate  1Mbps
Topology               Star/Peer-to-peer
Wiring Type            N/A
Boot ROM               Not available

[Image]

                             DIAGNOSTIC LED(S)

   LED      Color      Status     Installation           Condition

  LED1      Green        On         Computer        Radio connection to
                                                       Access Point

  LED1      Green        On       Access Point     Radio connection to at
                                                    least one computer

  LED1      Green       Off         Computer       No radio connection to
                                                       Access Point

  LED1      Green       Off       Access Point     No radio connection to
                                                        a computer

  LED1      Green     Blinking      Computer          Radio connection
                                                    directly to another
                                                         computer

  LED2      Amber     Blinking       Either       Network is transmitting
                                                       or receiving

  LED2      Amber       Off          Either            Network is not
                                                      transmitting or
                                                         receiving

                       MISCELLANEOUS TECHNICAL NOTES

            This card can be installed into either a computers PCMCIA
            slot or the PCMCIA slot on a Xircom Access Point module.

