
NESTAR SYSTEMS, INC.

PLAN 2000 NIC

NIC Type              Plan 2000 (proprietary)
Network Transfer Rate Unidentified
Data Bus              8-bit ISA
Topology              Star
Wire Type             RG-62A/U 93ohm coaxial
Boot ROM              Available

[Image]

                              CONNECTIONS

              Function                             Label

  RG-62A/U 93ohm coaxial connector                  CN1

                        USER CONFIGURABLE SETTINGS

                 Setting                    Label          Position

     Factory configured - do not alter     SW2/8        Unidentified

                               NODE ADDRESS

  Setting   SW1/1   SW1/2   SW1/3   SW1/4   SW1/5   SW1/6   SW1/7   SW1/8

    1       Off      On      On      On      On      On      On      On

    2        On     Off      On      On      On      On      On      On

    3       Off     Off      On      On      On      On      On      On

    4        On      On     Off      On      On      On      On      On

    5       Off      On     Off      On      On      On      On      On

   251      Off     Off      On     Off     Off     Off     Off      Off

   252       On      On     Off     Off     Off     Off     Off      Off

   253      Off      On     Off     Off     Off     Off     Off      Off

   254       On     Off     Off     Off     Off     Off     Off      Off

   255      Off     Off     Off     Off     Off     Off     Off      Off

            Note: A total of 254 node address settings are available. The
            switches are a binary representation of the decimal node
            addresses. SW1/8 is the Most Significant Bit and switch SW1/1
            is the Least Significant Bit. The switches have the following
            decimal values: SW1/8=128, SW1/7=64, SW1/6=32, SW1/5=16,
            SW1/4=8, SW1/3=4, SW1/2=2, SW1/1=1. Turn off the switches and
            add the values of the switches that are off to obtain the
            correct node ID. (Off=1, On=0)

            Node addresses 0 and 255 are reserved and should not be used.

            On some versions of this card, SW1 may be a one-use shunt
            instead of a switch.

                            SHARED RAM ADDRESS

  Setting    SW2/1    SW2/2    SW2/3    SW2/4    SW2/5    SW2/6    SW2/7

   0000h      On       On       On       On       On       On        On

   0400h      On       On       On       On       On       On       Off

   0800h      On       On       On       On       On       Off       On

   0C00h      On       On       On       On       On       Off      Off

   1000h      On       On       On       On       Off      On        On

   D200h      Off      Off      On       Off      On       On       Off

   EC00h      Off      Off      Off      Off      On       Off      Off

   F000h      Off      Off      Off      Off      Off      On        On

   F400h      Off      Off      Off      Off      Off      On       Off

   F800h      Off      Off      Off      Off      Off      Off       On

   FC00h      Off      Off      Off      Off      Off      Off      Off

            Note: A total of 128 memory address settings are available.
            The switches are a binary representation of the decimal
            memory addresses. SW2/1 is the Most Significant Bit and
            switch SW2/7 is the Least Significant Bit. The switches have
            the following decimal values: SW2/1=65,536, SW2/2=85=32,768,
            SW2/3=16,384, SW2/4=8,192, SW2/5=4,096, SW2/6=2,048,
            SW2/7=1,024. Turn off the switches and add the values of the
            switches that are off to obtain the correct address. (Off=1,
            On=0)

            On some versions of this card, SW2 may be a one-use shunt
            instead of a switch.

                                 INTERRUPT

  Setting     W2/A       W2/B      W2/C      W2/D       W2/E       W2/F

   IRQ2      Closed      Open      Open      Open       Open       Open

   IRQ3       Open      Closed     Open      Open       Open       Open

   IRQ4       Open       Open     Closed     Open       Open       Open

   IRQ5       Open       Open      Open     Closed      Open       Open

   IRQ6       Open       Open      Open      Open      Closed      Open

   IRQ7       Open       Open      Open      Open       Open      Closed

            Note:W2 is a set of solder contacts. To change the interrupt,
            you must cut the trace on W2/A andhard-wire a jumper with a
            soldering gun.

                          DIAGNOSTIC LED(S)

            The functions and colors of the LEDs are unidentified.

