
CORVUS SYSTEMS, INC.

TRANSPORTER MODEL 8010-08048

NIC Type              OmniNet (proprietary)
Network Transfer Rate Unidentified
Data Bus              8-bit ISA
Topology              Linear Bus
Wire Type             Shielded/Unshielded twisted pair
Boot ROM              Available

[Image]

                                CONNECTIONS

               Function                               Label

  Unshielded or shielded twisted pair                  CN1
  via 1/8" plug

                        USER CONFIGURABLE SETTINGS

                   Setting                      Label        Position

     Factory configured - do not alter          E1          Pins 1 & 2
                                                              closed

                               NODE ADDRESS

   Setting      U2/1      U2/2      U2/3      U2/4      U2/5       U2/6

      0          On        On        On        On        On         On

      1         Off        On        On        On        On         On

      2          On        Off       On        On        On         On

      3         Off        Off       On        On        On         On

      4          On        On        Off       On        On         On

     59         Off        Off       On        Off       Off       Off

     60          On        On        Off       Off       Off       Off

     61         Off        On        Off       Off       Off       Off

     62          On        Off       Off       Off       Off       Off

     63         Off        Off       Off       Off       Off       Off

            Note: A total of 64 node address settings are available. The
            switches are a binary representation of the decimal node
            addresses. U2/6 is the Most Significant Bit and switch U2/1
            is the Least Significant Bit. The switches have the following
            decimal values: U2/6=32, U2/5=16, U2/4=8, U2/3=4, U2/2=2,
            U2/1=1. Turn off the switches and add the values of the
            switches that are off to obtain the correct node ID. (Off=1,
            On=0)

                             BIAS SELECTION

        Setting                   U2/7                    U2/8

         Normal                   Off                      Off

         Biased                    On                      On

            Note:Only one machine per network should be set to biased.

