
DIGITAL EQUIPMENT CORPORATION

UTP SAS CONTROLLER (DEFPA-UA),

UTP SAS ADAPTER (DEFPA-UB)

Card Type              Network Interface Card
NIC Type               FDDI
Maximum Onboard Memory Unidentified
Boot ROM               Unidentified
Network Transfer Rate  100Mbps
Topology               Star
Wiring Type            Unshielded twisted pair
Data Bus               32-bit PCI

[Image]

           CONNECTIONS

    Function          Label

  UTP connector        CN1

                             DIAGNOSTIC LED(S)

    LED       Color         Status                  Condition

   LED1       Green           On           Network connection is good

   LED1       Green        Blinking      Network connection in progress

   LED1       Green          Off          Network connection is broken

   LED1        Red            On                    See Note

   LED1        Red         Blinking             Illegal topology

   LED1        Red           Off          Network connection is broken

  Note: If LED1 is on after system boots, indicates broken port or Link
  Confidence Test (LCT) failure; retry loop. If on before system boots,
  indicates self-test failure.

