
COMPU-SHACK PRODUCTION, GMBH

CS-FDDI PCI-LCF-DAS

Card Type              Network Interface Card
NIC Type               FDDI
Maximum Onboard Memory Unidentified
Boot ROM               Available
Network Transfer Rate  100Mbps
Topology               Ring
Wiring Type            Fiber optic cable
Data Bus               32-bit PCI

[Image]

                        CONNECTIONS

      Function         Label        Function         Label

  LCF transceiver 2     CN1     LCF transceiver 1     CN2

                        USER CONFIGURABLE SETTINGS

               Function                   Label            Position

     Boot ROM disabled                   JP13/A             Open

      Boot ROM enabled                    JP13/A            Closed

     Factory configured - do not         JP13/E         Unidentified
      alter

     Factory configured - do not          JP3           Unidentified
      alter

                        BASE I/O ADDRESS SELECTION

        Address              JP13/B           JP13/C           JP13/D

          200h-21Fh          Closed           Closed           Closed

          220h-23Fh          Closed           Closed            Open

          240h-25Fh          Closed            Open            Closed

          280h-29Fh          Closed            Open             Open

         300h-31Fh           Open            Closed           Closed

          320h-33Fh           Open            Closed            Open

          340h-35Fh           Open             Open            Closed

                             DIAGNOSTIC LED(S)

   LED         Color         Status                 Condition

  LED1      Unidentified       On        LCF 1 status (see conditions in
                                                   note below)

  LED2      Unidentified       Off       LCF 2 status (see conditions in
                                                   note below)

  LED3         Green           On            Ring connection is good

  LED3         Green           Off          Ring connection is broken

  LED4         Yellow          On                 Data is being
                                              transmitted/received

  LED4         Yellow          Off              Data is not being
                                              transmitted/received

  Note: LED1 and LED2 vary depending on model. Red (On: Illegal
  connection, Off: Valid connection); or Orange (On: Line error alarm
  activated, Off: Line error alarm not activated).

[Image]

  DAUGHTER BOARD USER CONFIGURABLE SETTINGS

  Note: JP14 and JP16 are unidentified.

