
ALLIED TELESYN, INC.

AT-MX300TX

Device Type            Transceiver
NIC Type               Ethernet
Maximum Onboard Memory Unidentified
Boot ROM               Not available
Network Transfer Rate  10/100Mbps
Topology               Star
Wiring Type            Unshielded Twisted Pair
Data Bus               External

[Image]

                              CONNECTIONS

        Function           Label            Function           Label

  40-pin MII interface      CN1      UTP connector (RJ-45)      CN2

                        BASE I/O ADDRESS SELECTION

    Note:      A total of 32 base address settings are available. The
               switches are a binary representation of the decimal memory
               addresses. SW1/1 is the Most Significant Bit and switch
               SW1/5 is the Least Significant Bit. The switches decimal
               values are unidentified. (Off=1, On=0)

                             DIAGNOSTIC LED(S)

   LED         Color          Status                Condition

   PWR      Unidentified        On                 Power is on

   PWR      Unidentified       Off                 Power is off

    FD      Unidentified        On         100Mbps: Transciever in full
                                                   duplex mode

                                         10Mbps: UTP receive data signals
                                             are correctly connected

    FD      Unidentified       Off       100Mbps: Transciever not in full
                                                   duplex mode

                                         10Mbps: UTP receive data signals
                                           are not correctly connected

   LNK      Unidentified        On          Network connection is good

   LNK      Unidentified       Off         Network connection is broken

    TX      Unidentified        On          Data is being transmitted

    TX      Unidentified       Off        Data is not being transmitted

    RX      Unidentified        On            Data is being received

    RX      Unidentified       Off          Data is not being received

   COL      Unidentified        On        Collision detected on network

   COL      Unidentified       Off       No collision detected on network

   100M     Unidentified        On        Transceiver is in 100Mbps mode

   100M     Unidentified       Off        Transceiver is in 10Mbps mode

