
GARRETT COMMUNICATIONS

MAGNUM CT1

Card Type                 Ethernet Transceiver
NIC Type                  Ethernet
Maximum Onboard Memory    Unidentified
Boot ROM                  Not available
Network Transfer Rate     10Mbps
Topology                  Linear Bus
Wiring Type               AUI transceiver via DB-15 port, RG-58A/U 50ohm
                          coaxial
Data Bus                  External

[Image]

                                CONNECTIONS

         Function             Label            Function           Label

  AUI transceiver via          CN1       RG-58A/U 50ohm            CN2
  DB-15                                  coaxial

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

     SQE enabled                                SW1            On

      SQE disabled                               SW1            Off

                          DIAGNOSTIC LED(S)

  LED     Color    Status                  Condition

  LED1    Green      On                   Power is on

  LED1    Green      Off                  Power is off

  LED2   Yellow      On                  SQE is enabled

  LED2   Yellow      Off                SQE is disabled

                       MISCELLANEOUS TECHNICAL NOTES

  The AUI port should be directly connected to the workstation. If you
  cannot connect directly to the workstation, an AUI drop cable (which
  cannot exceed 3 feet in length) may be used.

