
GARRETT COMMUNICATIONS

MAGNUM FT1/FT1A/FT10

Card Type              Ethernet Transceiver
NIC Type               Ethernet
Maximum Onboard Memory Unidentified
Boot ROM               Not available
Network Transfer Rate  10Mbps
Topology               Linear Bus, Star
Wiring Type            AUI transceiver via DB-15 port, Fiber optic
Data Bus               External

[Image]

                                CONNECTIONS

           Function              Label          Function           Label

  AUI transceiver port           CN1     ST transmit fiber          CN3
                                         connector

  ST receive fiber connector     CN2

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

     SQE disabled                               SW1            Off

      SQE enabled                                SW1            On

                             DIAGNOSTIC LED(S)

   LED         Color          Status                 Condition

   LED1     Unidentified        On             Power is on & network
                                                connection is good

   LED1     Unidentified        Off            Power is off & network
                                               connection is broken

   LED2     Unidentified        On         Collision detected on network

   LED2     Unidentified        Off           No collision detected on
                                                      network

   LED3     Unidentified     Blinking        Data is being transmitted

   LED3     Unidentified        Off        Data is not being transmitted

   LED4     Unidentified        On           Jabber condition detected

   LED4     Unidentified        Off        No jabber condition detected

   LED5     Unidentified     Blinking         Data is being received

   LED5     Unidentified        Off         Data is not being received

   LED6     Unidentified        On          Power is reaching the unit

   LED6     Unidentified        Off       Power is not reaching the unit

   LED7     Unidentified        On                SQE is enabled

   LED7     Unidentified        Off               SQE is disabled

                       MISCELLANEOUS TECHNICAL NOTES

  The FT1 and the FT1A use multi-mode fiber optic cable and the FT10 uses
  single-mode.

