
CABLETRON SYSTEMS, INC.

E5030 (FIBER ST/AUI)

Card Type              Network Interface Card
NIC Type               Ethernet
Maximum Onboard Memory Unidentified
Boot ROM               Not available
Network Transfer Rate  10Mbps
Topology               Linear Bus
Wiring Type            Fiber optic cable, AUI transceiver via DB-15
Data Bus               None

[Image]

                                CONNECTIONS

         Function            Label            Function            Label

  24 wire ribbon connector    CN1      ST connector                CN3
  to control board

  AUI connector               CN2      ST connector                CN4

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

      SQE enabled                                SW1            On

     SQE disabled                               SW1            Off

                       CABLE TYPE SELECTION

               Type                             SW2

  AUI transceiver via DB-15 port                Off

  Fiber optic cable                              On

                             DIAGNOSTIC LED(S)

    LED        Color        Status                  Condition

   LED1       Yellow       Blinking          Data is being received

   LED1       Yellow          Off          Data is not being received

   LED2        Green       Blinking         Connection error detected

   LED2        Green          On         Power is on, Network connection
                                            is good (RJ-45 connector)

   LED2        Green          Off        Power is off, Network connection
                                           is broken (RJ-45 connector)

   LED3        Green       Blinking         Data is being transmitted

   LED3        Green          Off         Data is not being transmitted

   LED4         Red        Blinking       Collision detected on network

   LED4         Red           Off       No collision detected on network

