
GARRETT COMMUNICATIONS

MAGNUM MII-FX (FIBER SC)

Card Type              Ethernet Transceiver
NIC Type               Ethernet
Maximum Onboard Memory Unidentified
Boot ROM               Not available
Network Transfer Rate  100Mbps
Topology               Star
Wiring Type            Fiber optic, MII
Data Bus               External

[Image]

                         CONNECTIONS

       Function         Label         Function         Label

  Fiber SC connector     CN1     MII connector          CN3

  Fiber SC connector     CN2

                        USER CONFIGURABLE SETTINGS

                   Function                      Label        Position

     Auto-configuring enabled                    SW1            On

      Host programmable                           SW1           Off

  Note: Orientation of switch may vary.

                             DIAGNOSTIC LED(S)

   LED         Color          Status                 Condition

   LED1     Unidentified     Blinking        Data is being transmitted

   LED1     Unidentified        Off        Data is not being transmitted

   LED2     Unidentified     Blinking         Data is being received

   LED2     Unidentified        Off         Data is not being received

   LED3     Unidentified        On               Half duplex mode

   LED3     Unidentified        Off              Full duplex mode

   LED4     Unidentified        On        100Mbps connection established

   LED4     Unidentified        Off            100Mbps connection not
                                                    established

   LED5     Unidentified     Blinking      Collision detected on network

   LED5     Unidentified        Off           No collision detected on
                                                      network

   LED6     Unidentified        On            Unit is receiving power

   LED6     Unidentified        Off         Unit is not receiving power

