
LINKSYS

ETHERFAST 10/100 LAN CARD (LNE100TX)

Card Type              Network Interface Card
NIC Type               Ethernet
Maximum Onboard Memory Unidentified
Boot ROM               Not available
Network Transfer Rate  10/100Mbps (20/200Mbps full duplex)
Topology               Star
Wiring Type            Unshielded twisted pair
Data Bus               32-bit PCI

[Image]

                 CONNECTIONS

       Function                Label

  RJ-45 UTP connector           CN1

                             DIAGNOSTIC LED(S)

   LED        Color         Status                  Condition

  LED1     Unidentified       On           Network connection is good

  LED1     Unidentified       Off         Network connection is broken

  LED2     Unidentified       On         Network is operating at 100Mbps

  LED2     Unidentified       Off        Network is operating at 10Mbps

  LED3     Unidentified    Blinking               Data is being
                                              transmitted/received

  LED3     Unidentified       Off               Data is not being
                                              transmitted/received

  LED4     Unidentified       On            Full duplex mode enabled

  LED4     Unidentified       Off           Half duplex mode enabled

