
LANCAST

6111-02

Card Type              Network Interface Card
NIC Type               Ethernet
Maximum Onboard Memory 6KB
Boot ROM               Not available
Network Transfer Rate  100Mbps (200Mbps full duplex)
Topology               Star
Wiring Type            Fiber optic cable
Data Bus               32-bit PCI

[Image]

                                CONNECTIONS

          Function            Label            Function            Label

  Fiber optic ST connector     CN1     Fiber optic ST connector     CN2
  - transmit                           - receive

                             DIAGNOSTIC LED(S)

   LED        Color         Status                  Condition

   LINK       Green           On            Network connection is good

   LINK        Red            On           Network connection is broken

    RX        Yellow       Blinking           Data is being received

    RX        Yellow          Off           Data is not being received

    TX        Green        Blinking         Data is being transmitted

    TX        Green           Off         Data is not being transmitted

  Note:With both the TX & RX LEDs lit up, the card is either using
  full-duplex mode or there is a data collision present.

