
ADDTRON TECHNOLOGY CO., LTD.

ET-10F1

Device Type            Transceiver
NIC Type               Ethernet
Maximum Onboard Memory Unidentified
Boot ROM               Not available
Network Transfer Rate  10Mbps
Topology               Star
Wiring Type            Fiber Optic cable - ST
Data Bus               External

[Image]

                                CONNECTIONS

         Function            Label            Function             Label

  Fiber optic connector       CN1     AUI transceiver via DB-15     CN3
  (ST)

  Fiber optic connector       CN2
  (ST)

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

     SQE test function enabled                  SW1             1

      SQE test function disabled                 SW1             2

      Loopback test initiated                    SW1             3

                             DIAGNOSTIC LED(S)

   LED        Color          Status                 Condition

   RX      Unidentified     Blinking          Data is being received

   RX      Unidentified        On             Heavy LAN traffic load

   RX      Unidentified       Off           Data is not being received

   TX      Unidentified     Blinking        Data is being transmitted

   TX      Unidentified        On        Large data is being transmitted

   TX      Unidentified       Off         Data is not being transmitted

   LNK     Unidentified        On           Network connection is good

   LNK     Unidentified       Off          Network connection is broken

   COL     Unidentified     Blinking      Collision detected on network

   COL     Unidentified       Off            Collision not detected on
                                                     network

   COL     Unidentified        On            Possible error occurred

