
BREEZECOM

SA-10 PRO.11

Card Type             Network Interface Card
NIC Type              Ethernet
Boot ROM              Not available
Radio Data Rate       3Mbps
Network Transfer Rate 2Mbps
Topology              Ad-hoc, infrastructure
Wiring Type           Unshielded twisted pair
Data Bus              External

[Image]

                           CONNECTIONS

       Function          Label          Function         Label

  RJ-45 UTP connector     CN1     DC power connector      CN3

  Monitor connector       CN2

                             DIAGNOSTIC LED(S)

   LED         Color         Status                 Condition

   LED1     Unidentified       On                  Power is on

   LED1     Unidentified       Off                 Power is off

   LED2     Unidentified       On           Connected to access point

   LED2     Unidentified       Off        Not connected to access point

   LED3     Unidentified       On           Data is being transmitted

   LED3     Unidentified       Off        Data is not being transmitted

   LED4     Unidentified       On             High quality reception

   LED4     Unidentified       Off                Poor reception

   LED5     Unidentified       On            Medium quality reception

   LED5     Unidentified       Off                Poor reception

   LED6     Unidentified       On             Low quality reception

   LED6     Unidentified       Off          Very low quality reception

                       MISCELLANEOUS TECHNICAL NOTES

  Unit may have two pre-installed antenna, or configured with two
  connectors for external antenna.

