
TANDBERG DATA

TDC 3500, TDC 3700

Device Type             Tape Drive
Interface               SCSI-2
Format                  QIC-3040 (read only for TDC-3700)

                        QIC-3210
Sustained Transfer Rate 300KBPS
Size                    3.5 in. half height
View                    Top


              CONNECTIONS

      Function             Label

  Ground connector          CN1

                        USER CONFIGURABLE SETTINGS

               Setting                     Label            Position

     Factory configured - do not      JP1/Pins 1 & 2     Unidentified
      alter. (BIRDOUT Test)

     Factory configured - do not      JP1/Pins 3 & 4     Unidentified
      alter. (BIRDIN Test)

      Parity enabled                   JP1/Pins 11 &         Closed
                                            12

      Parity disabled                  JP1/Pins 11 &          Open
                                            12

      Termination enabled              JP1/Pins 21 &         Closed
                                            22

      Termination disabled             JP1/Pins 21 &          Open
                                            22

                              DRIVE SELECT ID

    Drive ID      JP1/Pins 13 & 14   JP1/Pins 15 & 16   JP1/Pins 17 & 18

        0               Open               Open               Open

        1               Open               Open              Closed

        2               Open              Closed              Open

        3               Open              Closed             Closed

        4              Closed              Open               Open

        5              Closed              Open              Closed

        6              Closed             Closed              Open

        7              Closed             Closed             Closed

  Note: Pins 2 & 4 must be open to enable SCSI select.

                        TERMINATION POWER SELECTION

                 Setting                          JP1/Pins 19 & 20

     TERMPWR supplied by drive                        Closed

      TERMPWR supplied by SCSI interface                Open
      to drive

                      MANUFACTURERS RECOMMENED MEDIA

    Drive            Tape           Capacity Without      Capacity With
                                      Compression         Compression

   TDC 3500        3M MC3000            640MB            Unidentified
                    295ft.

   TDC 3500       3M MC3000XL           840MB            Unidentified
                    400ft.

   TDC 3500      SONY QW3000XL          1.0GB            Unidentified
                    400ft.

   TDC 3700     SONY QW3000MP++         2.3GB            Unidentified
                    425ft.


                             DIAGNOSTIC LED(S)

    LED        Color        Status                  Condition

   LED1        Green       Blink 1       Cleaning operation in progress

   LED1         N/A          Off          Cleaning operation completed

   LED1        Amber       Blink 1           DPCC 2 has completed all
                                        cleanings and is out of filament

  Note: A Dry Process Cleaning Cartridge (TDS DPCC-2000) is required to
  enable the above cleaning

  functions.

  1 LED will blink at two cycles per second.

  2 Dry Process Cleaning Cartridge.

                 1) If eject button is pressed during cleaning
                 operations, LED will blink green at six cycles per
                 second. The DPCC will be automatically ejected when the
                 cleaning process is completed, cleaning operations will
                 not be interrupted by the eject command, and the LED
                 will turn off when the eject sequence is completed.

                 2) If eject button is pressed before cleaning
                 operations, LED will blink green at six cycles per
                 second, and the DPCC will be ejected immediately. If
                 drive is already performing a DPCC insert sequence, it
                 will be completed before the cartridge is ejected.

                 3) If eject button is pressed after cleaning operations
                 are completed, LED will blink green at six cycles per
                 second, and the cartridge will be ejected immediately.

