
CONNER PERIPHERALS, INC.

CTD2004H-S, CTD4004H-S, CTD8004H-S, CTD2004R-S, CTD4004R-S, CTD8004R-S

Device Type             Internal Tape Drive
Interface               SCSI-2
Format                  DDS (CTD2004H-S and CTD2004R-S)

                        DDS-DC (CTD4004H-S and CTD4004R-S)

                        DDS-2 (CTD8004H-S and CTD8004R-S)
Sustained Transfer Rate 550KBPS

                        1,100KBPS (compressed - CTD4004H-S, CTD8004H-S,
                        CTD4004R-S, and CTD8004R-S only)
Size                    3.5 in. half height (CTD2004H-S, CTD4004H-S, and
                        CTD8004H-S)

                        5.25 in. half height (CTD2004R-S, CTD4004R-S, and
                        CTD8004R-S with adapter)
View                    Bottom


                        USER CONFIGURABLE SETTINGS

               Setting                     Label            Position

     Factory configured - do not       JP1/Pins 7-10     Unidentified
      alter

     Termination enabled               JP1/Pins 11 &        Closed
                                             12

      Termination disabled              JP1/Pins 11 &         Open
                                             12

     Factory configured - do not       JP1/Pins 13 &     Unidentified
      alter                                  14

     MRS Mode disabled                    SW1/S4              On

      MRS Mode enabled                     SW1/S4              Off

     Parity check disabled                SW1/S5              Off

      Parity check enabled                 SW1/S5              On

     Data compression enabled             SW1/S6              Off

      Data compression disabled            SW1/S6              On

     Factory configured - do not          SW1/S7              Off
      alter

     Self-Test disabled                   SW1/S8              Off

      Self-Test enabled                    SW1/S8              On

  Note: MRS (Media Recognition System) Mode enabled allows drive to
  detect DDS cartridges that support this feature.

                              DRIVE SELECT ID

    Drive ID       JP1/Pins 1 & 2      JP1/Pins 3 & 4     JP1/Pins 5 & 6

         0             Open                Open               Open

          1            Closed               Open               Open

          2             Open               Closed              Open

          3            Closed              Closed              Open

          4             Open                Open              Closed

          5            Closed               Open              Closed

          6             Open               Closed             Closed

          7            Closed              Closed             Closed

  Note: If using Pins 1-6 of JP1 for SCSI ID selection, S1, S2, and S3 of
  SW1 must be set to the Off position.

                              DRIVE SELECT ID

     Drive ID            SW1/S1             SW1/S2            SW1/S3

          0              Off                Off                Off

           1               On                Off                Off

           2              Off                 On                Off

           3               On                 On                Off

           4              Off                Off                On

           5               On                Off                On

           6              Off                 On                On

           7               On                 On                On

  Note: If using S1, S2, and S3 of SW1 for SCSI ID selection, Pins 1-6 of
  JP1 must be set to the Open position.

                        TERMINATION POWER SELECTION

                 Setting                          JP1/Pins 15 & 16

     TERMPWR supplied by drive                        Closed

      TERMPWR supplied by SCSI interface                Open
      to drive

                      MANUFACTURERS RECOMMENDED MEDIA

     Drive              Tape         Capacity Without     Capacity With
                                       Compression         Compression

   CTD2004H-S     90 meter DDS DAT        2.0GB                N/A
                     cartridge

   CTD2004R-S     90 meter DDS DAT        2.0GB                N/A
                     cartridge

   CTD4004H-S      90 meter DDS-DC        2.0GB               4.0GB
                   DAT cartridge

   CTD4004R-S      90 meter DDS-DC        2.0GB               4.0GB
                   DAT cartridge

   CTD8004H-S      90 meter DDS-DC        2.0GB               4.0GB
                   DAT cartridge

   CTD8004H-S      120 meter DDS-2        4.0GB               8.0GB
                   DAT cartridge

   CTD8004R-S      90 meter DDS-DC        2.0GB               4.0GB
                   DAT cartridge

   CTD8004R-S      120 meter DDS-2        4.0GB               8.0GB
                   DAT cartridge


                             DIAGNOSTIC LED(S)

    LED        Color         Status                 Condition

   LED1        Green           On         Cartridge is inserted and does
                                          not generate excessive errors

   LED1        Green       Slow Flash       Cartridge is inserted but
                                            generates excessive errors
                                           (cleaning may be required)

   LED1        Green       Fast Flash     Drive could not write to tape
                                          correctly - cleaning required

   LED1        Green          Off            Cartridge not inserted

   LED2        Yellow          On        Drive is reading or writing the
                                                      tape

   LED2        Yellow      Fast Flash        Hardware fault occurred

   LED2        Yellow         Off                Drive not busy

  Note: If LED1 flashes during Slow Flash of LED2, a prerecorded audio
  cartridge is inserted and is being played automatically. Use DDS DAT
  cleaning cartridges only.

