
TOSHIBA

TXM3401E1 (SCSI SWITCH)

Device Type                  CD-ROM
Interface                    SCSI (2)
Size                         238 x 70 x 222mm
Spin Rate                    1x, 2x
Formats Supported            CD-XA, CD-I Ready, CD Bridge, Photo CD, Red
                             book, Yellow book
View                         Top


                                CONNECTIONS

          Function             Label           Function             Label

  Audio out - left channel     CN1     Audio out - right channel    CN2

                       MISCELLANEOUS TECHNICAL NOTES

  The SCSI ID switch (SW) is used to select the drive ID. The number in
  the window corresponds to the selected SCSI ID. To change the SCSI ID,
  press the "+" or "-" lever for higher or lower number. After the "7" ID
  there are 2 blank spots, the first is for "Play audio CD" mode, the
  second is not used at this time.

  To change SCSI ID turn power off/on for the change to take effect.

