
INTERLOGIC INDUSTRIES

A104-FM

Modem Type                   Data/Fax
Maximum Data Rate            2400 bps
Maximum Fax Rate             9600 bps
Data Bus                     Unidentified
Fax Class                    Unidentified
Data Modulation Protocol     Bell 103A & 212A, CCITT V.22
Fax Modulation Protocol      Unidentified
Error Correction/Compression CCITT V.42 & V.42bis, MNP 5

[Image]

                            CONNECTIONS

       Purpose          Location         Purpose         Location

  Line in                 CN1      Line out                 CN2

                             COM PORT SETTINGS

        COM                JP1               JP2               JP3

       COM4             Pins 2 & 3        Pins 2 & 3        Pins 2 & 3
                         closed            closed             closed

       COM1             Pins 1 & 2        Pins 1 & 2        Pins 1 & 2
                         closed            closed             closed

       COM2             Pins 2 & 3        Pins 2 & 3        Pins 1 & 2
                         closed            closed             closed

       COM3             Pins 1 & 2        Pins 1 & 2        Pins 2 & 3
                         closed            closed             closed

              CONNECTOR JP4

       Purpose             Location

  Pair 2 Tip & Ring       Pins 1 & 4

  Pair 1 Tip & Ring       Pins 2 & 3

                  S14 -BIT MAPPED CONFIGURATION REGISTER

  Value Range:              Bit-mapped

  Default:                  1

  Type:                     Read/Write

  In Stored Profile?:       Yes

  Description:              Bit Mapped Configuration Register

       Bit          Value                       Function

        0             0        Not used

        1              1       Enable: Command echo (E1)

                      0        Disable: Command echo (E0)

        2              0       Enable: Result codes (Q0)

                      1        Disable: Result codes (Q1)

        3              1       Set result codes to word (V1)

                      0        Set result codes to digit (V0)

        4             0        Not used

        5              1       Set to Pulse dial (P)

                      0        Set to Tone Dial (T)

        6             0        Not used

        7              1       Enable: Originate mode

                      0        Enable: Answer mode

                  S21 -BIT MAPPED CONFIGURATION REGISTER

  Value Range:              Bit-mapped

  Default:                  1

  Type:                     Read/Write

  In Stored Profile?:       Yes

  Description:              Bit Mapped Configuration Register

       Bit           Value                      Function

        0              0       Not used

        1              0       Not used

        2              0       Not used

      3 & 4            00      Sets modem to ignore DTR (&D0)

                       01      ON-to-OFF transition on DTR forces the
                               modem to enter the command mode (&D1)
                       10
                               ON-to-OFF transition on DTR forces the
                      11       modem to hang up (&D2)

                               ON-to-OFF transition on DTR forces the
                               modem to reset (&D3)

        5              0       Enable: DCD always ON (&C0)

                       1       DCD checks the actual state of the data
                               carrier (&C1)

        6              0       Not used

        7              0       Disable: Long Space Disconnect (Y0)

                       1       Enable: Long Space Disconnect (Y1)

                  S22 -BIT MAPPED CONFIGURATION REGISTER

  Value Range:             Bit-mapped

  Default:                 1

  Type:                    Read/Write

  In Stored Profile?:      Yes

  Description:             Bit Mapped Configuration Register

       Bit           Value                      Function

      0 & 1            10      Speaker volume set to medium (l1)

                       00      Speaker volume set to low (l0)

                       01      Speaker volume set to low (l1)

                      11       Speaker volume set to high (l3)

      2 & 3            01      Enable: Speaker on until carrier detected
                               (M1)
                       00
                               Disable: Speaker (M0)
                       10
                               Enable: Speaker always on (M2)
                      11
                               Enable: Speaker on until carrier detected
                               but Off during dialing (M3)

    4 & 5 & 6         111      Enable: fourth extended result code set
                               (X4)
                      000
                               Enable: basic result code set (x0)
                      100
                               Enable: first extended result code set
                      101      (X1)

                      110      Enable: second extended result code set
                               (X2)

                               Enable: third extended result code set
                               (X3)

        7              0       Set Make/Break ratio is 39/61 for USA
                               (&P0)
                       1
                               Set Make/Break ratio is 33/67 for UK/HK
                               (&P1)

                  S23 - BIT MAPPED CONFIGURATION REGISTER

  Value Range:              Bit-mapped

  Default:                  1

  Type:                     Read/Write

  In Stored Profile?:       Yes

  Description:              Bit Mapped Configuration Register

       Bit           Value                      Function

        0               1       Disable: Accept request from remote modem
                                for a remote digital loopback (&T5)
                       0
                                Enable: Accept request from remote modem
                                for a remote digital loopback (&T4)

    1 & 2 & 3          000      300 bps

                       001      600 bps

                       010      1200 bps

                       011      2400 bps

                       100      4800 bps

                      101       9600 bps

      4 & 5            00       Enable: Even parity.

                       01       Enable: Space parity.

                       10       Enable: Odd parity.

                       11       Enable: Mark parity.

        6              00       Disable: Guard tone (&G0)

                       01       Enable: 550 Hz guard tone (&G2)

                       10       Enable: 1800 Hz guard tone (&G2)

                       11       Not used

                  S27 -BIT MAPPED CONFIGURATION REGISTER

  Value Range:              Bit-mapped

  Default:                  1

  Type:                     Read/Write

  In Stored Profile?:       Yes

  Description:              Bit Mapped Configuration Register

       Bit          Value                       Function

        0             0        Not used

        1             0        Not used

        2             0        Not used

        3             0        Not used

        4             0        Not used

        5             0        Not used

        6              1       Enable: Bell 212A with 1200bps, Bell 103
                               with 300bps (B1)
                      0
                               Enable: CCITT V.22 with 1200bps; V.21 with
                               300bps (B0)

        7             0        Not used

