
INTERLOGIC INDUSTRIES

A104-VFM

Modem Type                   Data/Fax/Voice
Maximum Data Rate            2400 bps
Maximum Fax Rate             9600 bps
Data Bus                     PC/104
Fax Class                    Unidentified
Data Modulation Protocol     Bell 103A & 212A, CCITT V.22
Fax Modulation Protocol      Unidentified
Error Correction/Compression CCITT V.42 & V.42bis, MNP 5

[Image]

                            CONNECTIONS

       Purpose          Location         Purpose         Location

  Line out                CN1      Speaker jack            SPKR

  Line in                 CN2

                     COM PORT SETTINGS

        COM            JU1       JU2        JU3       JU4

        COM1           Open      Open     Closed     Open

        COM2          Closed     Open      Open     Closed

        COM3           Open     Closed    Closed     Open

        COM4          Closed    Closed     Open     Closed

              CONNECTOR JP1

       Purpose             Location

  Pair 2 Tip & Ring     JP1 Pins 1 & 4

  Pair 1 Tip & Ring     JP1 Pins 2 & 3

                  S14 -BIT MAPPED CONFIGURATION REGISTER

  Value Range:              Bit-mapped

  Default:                  1

  Type:                     Read/Write

  In Stored Profile?:       Yes

  Description:              Bit Mapped Configuration Register

       Bit          Value                       Function

        0             0        Not used

        1              1       Enable: Command echo (E1)

                      0        Disable: Command echo (E0)

        2              0       Enable: Result codes (Q0)

                      1        Disable: Result codes (Q1)

        3              1       Set result codes to word (V1)

                      0        Set result codes to digit (V0)

        4             0        Not used

        5              1       Set to Pulse dial (P)

                      0        Set to Tone Dial (T)

        6             0        Not used

        7              1       Enable: Originate mode

                      0        Enable: Answer mode

                  S21 -BIT MAPPED CONFIGURATION REGISTER

  Value Range:              Bit-mapped

  Default:                  1

  Type:                     Read/Write

  In Stored Profile?:       Yes

  Description:              Bit Mapped Configuration Register

       Bit           Value                      Function

        0              0       Not used

        1              0       Not used

        2              0       Not used

      3 & 4            00      Sets modem to ignore DTR (&D0)

                       01      ON-to-OFF transition on DTR forces the
                               modem to enter the command mode (&D1)
                       10
                               ON-to-OFF transition on DTR forces the
                      11       modem to hang up (&D2)

                               ON-to-OFF transition on DTR forces the
                               modem to reset (&D3)

        5              0       Enable: DCD always ON (&C0)

                       1       DCD checks the actual state of the data
                               carrier (&C1)

        6              0       Not used

        7              0       Disable: Long Space Disconnect (Y0)

                       1       Enable: Long Space Disconnect (Y1)

                  S22 -BIT MAPPED CONFIGURATION REGISTER

  Value Range:             Bit-mapped

  Default:                 1

  Type:                    Read/Write

  In Stored Profile?:      Yes

  Description:             Bit Mapped Configuration Register

       Bit           Value                      Function

      0 & 1            10      Speaker volume set to medium (l1)

                       00      Speaker volume set to low (l0)

                       01      Speaker volume set to low (l1)

                      11       Speaker volume set to high (l3)

      2 & 3            01      Enable: Speaker on until carrier detected
                               (M1)
                       00
                               Disable: Speaker (M0)
                       10
                               Enable: Speaker always on (M2)
                      11
                               Enable: Speaker on until carrier detected
                               but Off during dialing (M3)

    4 & 5 & 6         111      Enable: fourth extended result code set
                               (X4)
                      000
                               Enable: basic result code set (x0)
                      100
                               Enable: first extended result code set
                      101      (X1)

                      110      Enable: second extended result code set
                               (X2)

                               Enable: third extended result code set
                               (X3)

        7              0       Set Make/Break ratio is 39/61 for USA
                               (&P0)
                       1
                               Set Make/Break ratio is 33/67 for UK/HK
                               (&P1)

                  S23 - BIT MAPPED CONFIGURATION REGISTER

  Value Range:              Bit-mapped

  Default:                  1

  Type:                     Read/Write

  In Stored Profile?:       Yes

  Description:              Bit Mapped Configuration Register

       Bit           Value                      Function

        0               1       Disable: Accept request from remote modem
                                for a remote digital loopback (&T5)
                       0
                                Enable: Accept request from remote modem
                                for a remote digital loopback (&T4)

    1 & 2 & 3          000      300 bps

                       001      600 bps

                       010      1200 bps

                       011      2400 bps

                       100      4800 bps

                      101       9600 bps

      4 & 5            00       Enable: Even parity.

                       01       Enable: Space parity.

                       10       Enable: Odd parity.

                       11       Enable: Mark parity.

        6              00       Disable: Guard tone (&G0)

                       01       Enable: 550 Hz guard tone (&G2)

                       10       Enable: 1800 Hz guard tone (&G2)

                       11       Not used

                  S27 -BIT MAPPED CONFIGURATION REGISTER

  Value Range:              Bit-mapped

  Default:                  1

  Type:                     Read/Write

  In Stored Profile?:       Yes

  Description:              Bit Mapped Configuration Register

       Bit          Value                       Function

        0             0        Not used

        1             0        Not used

        2             0        Not used

        3             0        Not used

        4             0        Not used

        5             0        Not used

        6              1       Enable: Bell 212A with 1200bps, Bell 103
                               with 300bps (B1)
                      0
                               Enable: CCITT V.22 with 1200bps; V.21 with
                               300bps (B0)

        7             0        Not used

