
PENRIL DATABILITY NETWORKS

ALLIANCE V.32/14.4, ALLIANCE V.32/14.4M

Modem Type                   Data (synchronous/asynchronous)/Fax
Maximum Data Rate            14.4Kbps
Maximum Fax Rate             14.4Kbps
Data Bus                     External
Fax Class                    Class I & II
Data Modulation Protocol     Bell 103A/212A, 208A/B

                             ITU-T V.21, V.22, V.22bis, V.26, V.26bis,
                             V.27bis, V.27ter

                             V.29, V.32, V.32bis, V.33
Fax Modulation Protocol      ITU-T V.17, V.27ter, V.29
Error Correction/Compression MNP5, V.42, V.42bis

[Image]



                                CONNECTIONS

        Purpose           Location            Purpose            Location

  LCD display                LCD       Line in                     CN1

  Left arrow button          BT1       Leased line out             CN2

  1 button                   BT2       Leased line out             CN3

  2 button                   BT3       Switched line out           CN4

  3 button                   BT4       DC power                    CN5

  Right arrow button         BT5       Diagnostic connector        CN6

  ENTER button               BT6       RS-232/422                  CN7

                    A/A1 - MI/MIC CONTROL

    Control Type             JP5                  JP6

   A/A1 control.      Pin 1 & 2 closed.   Pin 1 & 2 closed.

   MI/MIC control.     Pin 2 & 3 closed.   Pin 2 & 3 closed.

                        DTE CONNECTOR - PIN 25

             Function                             JP7

     Analog loopback (Input).              Pin 1 & 2 closed.

   Test Mode Indicator (Output).          Pin 2 & 3 closed.

                            FRAME/SIGNAL GROUND

             Ground Type                               JP1

  Frame and signal ground connected.            Pin 1 & 2 closed.

   Frame and signal ground not                 Pin 2 & 3 closed.
  connected.

  FACTORY CONFIGURED SETTINGS - DO NOT ALTER

        Jumper                 Setting

          JP8             Pin 2 & 3 closed.

          JP9             Pin 2 & 3 closed.

         JP10             Pin 2 & 3 closed.

         JP11             Pin 2 & 3 closed.

                                   POWER

   Power Source          JP2                JP3                JP4

   AC power.          Pin 1 & 2         Pin 1 & 2          Pin 1 & 2
                       closed.            closed.            closed.

    DC power.          Pin 2 & 3         Pin 2 & 3          Pin 2 & 3
                       closed.            closed.            closed.

                         Proprietary AT Command Set

               See document V1409 for a full command summary.

