
BOCA RESEARCH, INC.

BOCA OFFICE COMMUNICATOR V.34 (FDVSP34I)

Card Type                    Modem/speakerphone
Chip Set                     Unidentified
Maximum Data Rate            28.8Kbps
Maximum Fax Rate             14.4Kbps
Data Bus                     8 bit ISA
Fax Class                    Class I & II
Data Modulation Protocol     Bell 103A/212A

                             ITU-T V.21, V.22, V.22bis, V.32, V.32bis,
                             V.34

                             Rockwell V.FC
Fax Modulation Protocol      ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression MNP5, V.42, V.42bis

[Image]

                                CONNECTIONS

        Function           Label             Function              Label

  Line in                       CN1      Microphone                 CN3

  Line out                      CN2      Speaker                    CN4

                         Proprietary AT Command Set

                    AUTO RETRAIN FALLBACK/FALLFORWARD

  Type          Configuration

  Format        AT [cmds] %En [cmds]

  Description   Controls auto retrain mode and fallback/fallforward

    Command                             Function

      %E0        Auto retrain disabled

      %E1        Auto retrain enabled

      %E2        Auto retrain and fallback/fallforward enabled

                               BREAK SEND

  Type          Configuration

  Format        AT [cmds] \Bn [cmds]

  Default       3

  Range         1-9

  Unit          .1 second

  Description   Sends break of n length to remote modem

                                BREAK TYPE

  Type:                        Configuration

  Format:                      AT [cmds] \Kn [cmds]

  Description:                 Configures action of break signal.

    Command      Break from DTE      Break from DTE      Break from DTE
                                    while in normal      while in direct
                    while in             mode                 mode
                 reliable mode

     \K0        Enter command      Buffers cleared     Send break and
                mode, do not       and break sent to   enter command mode
                send break to      remote modem
                remote modem

     \K1        Buffers cleared    Buffers cleared     Send break and
                and break sent     and break sent to   enter command mode
                to remote modem    remote modem

     \K2        Enter command      Send break to       Send break to
                mode, do not       remote modem        remote modem
                send break to      immediately         immediately
                remote modem

     \K3        Send break to      Send break to       Send break and
                remote modem       remote modem        enter command mode
                immediately        immediately

     \K4        Enter command      Send break to       Send break to
                mode, do not       remote modem with   remote modem
                send break to      transmitted data    immediately
                remote modem

     \K5        Send break with    Send break to       Send break to
                transmitted data   remote modem with   remote modem
                                   transmitted data    immediately

                               COMPRESSION

  Type          Configuration

  Format        AT [cmds] %Cn [cmds]

  Description   Selects data compression

    Command                             Function

      %C0       Data compression disabled

      %C1       MNP5 enabled

      %C2       V.42bis enabled

      %C3       MNP5 and V.42bis enabled

                           FAX TRANSMIT LEVEL

  Type          Register

  Format        AT [cmds] S92=n [cmds]

  Default       10

  Range         0-15

  Unit          -1dBm

  Description   Controls fax transmission level

                         FLASH DIAL MODIFIER TIME

  Type                 Register

  Format               AT [cmds] S29=n [cmds]

  Default              10

  Range                0-255

  Unit                 1ms

  Description          Time the modem will go on-hook upon receiving the
                       ! dial modifier in dial string

                      FLOW CONTROL CHARACTER - XOFF

  Type          Register

  Format        AT [cmds] S33=n [cmds]

  Default       19

  Range         0-255

  Unit          ASCII

  Description   Sets the character used to represent XOFF

                      FLOW CONTROL CHARACTER - XON

  Type          Register

  Format        AT [cmds] S32=n [cmds]

  Default       17

  Range         0-255

  Unit          ASCII

  Description   Sets the character used to represent XON

                            LINE SIGNAL LEVEL

  Type          Immediate

  Format        AT [cmds] %L [cmds]

  Range         009-043

  Unit          -1dBm

  Description   Reports received signal level

                   MAXIMUM BLOCK SIZE FOR TRANSMISSION

  Type          Configuration

  Format        AT [cmds] \An [cmds]

  Description   Sets the maximum transmittable block size.

    Command                             Function

      \A0        Maximum MNP block size is 64 characters.

      \A1        Maximum MNP block size is 128 characters.

      \A2        Maximum MNP block size is 192 characters.

      \A3        Maximum MNP block size is 256 characters.

                             MODEM PROTOCOL

  Type          Configuration

  Format        AT [cmds] \Nn [cmds]

  Description   Sets connect mode

    Command                             Function

      \N0        Normal mode enabled

      \N1        Direct mode enabled

      \N2        Reliable mode enabled

      \N3        MNP or normal mode enabled

      \N4        LAP-M reliable enabled

      \N5        MNP reliable mode enabled

                             PROTOCOL/SPEED

  Type          Register

  Format        AT [cmds] S37=n [cmds]

  Description   Selects switched line speed

    Command                             Function

     S37=0       Connect at highest common speed

     S37=1       Connect at 300bps

     S37=2       Connect at 300bps

     S37=3       Connect at 300bps

     S37=4       Not used

     S37=5       Connect at 1200bps

     S37=6       Connect at 2400bps

     S37=7       Connect at V.23

     S37=8       Connect at 4800bps

     S37=9       Connect at 9600bps

    S37=10       Connect at 12.0Kbps

    S37=11       Connect at 14.4Kbps

    S37=12       Connect at 7200bps

                           REPORT SIGNAL QUALITY

  Type            Immediate

  Format          AT [cmds] %Q [cmds]

  Description     Reports signal quality. Retrain threshold is 008 or
                  greater.

                          SLEEP INACTIVITY TIMER

  Type                   Register

  Format                 AT [cmds] S24=n [cmds]

  Default                0

  Range                  0-255

  Unit                   Second

  Description            Maximum duration of DTE and DCE inactivity
                         allowed prior to initiating low-power sleep mode

  BIT MAPPED REGISTERS

  Register     Default

    S14          138

    S16           0

    S21           4

    S22          117

    S23          54

    S27           9

    S28           0

    S31           2

    S39           3

    S40          105

    S41           3

