
STOLLMANN GMBH

TA-D

Card Type                ISDN TA
Chip Set                 Unidentified
Maximum Data Rate        64Kbps x 2
Data Bus                 External
ISDN Modulation Protocol V.110, 1TR6, DSS1, X.30

[Image]

                                CONNECTIONS

         Function           Label             Function             Label

  Line out                       CN1       V.24 or X.21 port 1      CN4

  DC power                       CN2       Reset button             SW1

  V.24 or X.21 port 2            CN3

            Note: X.21 functionality is provided by an included adapter
            cable.

                        USER CONFIGURABLE SETTINGS

                    Setting                       Label       Position

  Editor debug mode disabled                        J3          Open

  Editor debug mode enabled                         J3         Closed

  TA will use saved profile                         J4          Open

  TA will use default profile only                  J4         Closed

  Remote configuration enabled                      J6          Open

  Remote configuration disabled                     J6         Closed

  Port 1 is in V.24 mode                            J9          Open

  Port 1 is in X.21 mode                            J9         Closed

  Port 2 is in V.24 mode                           J10          Open

  Port 2 is in X.21 mode                           J10         Closed

  Port 1 is in DCE mode                            J13         Closed

  Port 1 is in DTE mode                            J13          Open

  Pin 25 of port 1 is not connected                J13A         Open

  Pin 25 of port 1 is +9V DC                       J13A        Closed

  Port 2 is in DCE mode                            J14         Closed

  Port 2 is in DTE mode                            J14          Open

  Pin 25 of port 2 is not connected                J14A         Open

  Pin 25 of port 2 is +9V DC                       J14A        Closed

  Pin 1 of port 1 is capacitive ground             JN1          Open

  Pin 1 of port 1 is galvanic ground               JN1         Closed

  Pin 1 of port 2 is capacitive ground             JN2          Open

  Pin 1 of port 2 is galvanic ground               JN2         Closed

  Factory configured - do not alter                 J5       Unidentified

  Factory configured - do not alter                 J7       Unidentified

  Factory configured - do not alter                 J8       Unidentified

                     ISDN INTERFACE TYPE

       Setting               J11                  J12

     S-interface       Pins 1 & 2 closed   Pins 1 & 2 closed

     U-interface       Pins 2 & 3 closed   Pins 2 & 3 closed

                          LINE TYPE

       Setting                J1                  J2

     Public ISDN             Open                Open

      ISDN PBX              Closed               Open

  ISDN PBX with LLC          Open               Closed

                             DIAGNOSTIC LED(S)

                 LED1 Status                           Condition

                     On                               Power is on

                     Off                              Power is off

                  Blinking                            ISDN failed

  LED2 Status    LED3 Status    LED4 Status            Condition

   Blinking          Off            Off             TA is resetting

      Off            Off            Off           Normal operation for
                                                       channel 1

      On             Off            Off              ISDN connection
                                                established on channel 1

  Alternating    Alternating        Off        Hotline call repetition in
                                                 progress on channel 1

   Blinking       Blinking          Off          Hotline call repetition
                                                   error on channel 1

   Blinking          Off            Off          Hotline active without
                                                connection on channel 1

      On             Off            Off           Profile editor in use
                                                  locally on channel 1

      On             On             On           Profile editor password
                                               being entered on channel 1

      On          Blinking       Blinking         Profile editor in use
                                                 remotely on channel 1

      Off            Off            On             Unable to determine
                                               correct connection rate on
                                                       channel 1

      Off            On             Off         Buffer has overflowed on
                                                       channel 1

  Alternating     Blinking      Alternating      Checksum error has been
                                                 detected on channel 1

  LED5 Status    LED6 Status    LED7 Status            Condition

   Blinking          Off            Off             TA is resetting

      Off            Off            Off           Normal operation for
                                                       channel 2

      On             Off            Off              ISDN connection
                                                established on channel 2

  Alternating    Alternating        Off        Hotline call repetition in
                                                 progress on channel 2

   Blinking       Blinking          Off          Hotline call repetition
                                                   error on channel 2

   Blinking          Off            Off          Hotline active without
                                                connection on channel 2

      On             Off            Off           Profile editor in use
                                                  locally on channel 2

      On             On             On           Profile editor password
                                               being entered on channel 2

      On          Blinking       Blinking         Profile editor in use
                                                 remotely on channel 2

      Off            Off            On             Unable to determine
                                               correct connection rate on
                                                       channel 2

      Off            On             Off         Buffer has overflowed on
                                                       channel 2

  Alternating     Blinking      Alternating      Checksum error has been
                                                 detected on channel 2

                          Proprietary Command Sets

               See document V1971 for a full command summary.

