
BANKSIA TECHNOLOGY PTY., LTD.

MY IN MODEM

Card Type                    Fax, Modem (asynchronous)
Chip Set                     Unidentified
Maximum Data Rate            14.4Kbps
Maximum Fax Rate             14.4Kbps
Data Bus                     8-bit ISA
Fax Class                    Class I & II
Data Modulation Protocol     Bell103/212A/2400

                             ITU-T V.21, V.22, V.22bis, V.23, V.32,
                             V.32bis
Fax Modulation Protocol      ITU-T V.17, V.27ter, V.29
Error Correction/Compression MNP5, V.42, V.42bis

[Image]

      CONNECTIONS

  Function     Label

  Line out      CN1

            SERIAL PORT ADDRESS

    Setting        JP1/6          JP1/7

  COM1 (3F8h)      Closed        Closed

  COM2 (2F8h)      Closed         Open

  COM3 (3E8h)       Open         Closed

  COM4 (2E8h)       Open          Open

                            INTERRUPT

  Setting     JP1/1      JP1/2      JP1/3      JP1/4     JP1/5

     2       Closed      Open       Open       Open       Open

     3        Open      Closed      Open       Open       Open

     4        Open       Open      Closed      Open       Open

     5        Open       Open       Open      Closed      Open

     7        Open       Open       Open       Open      Closed

                           SUPPORTED COMMAND SET

                             Basic AT Commands

  AT, +++, Comma, A/

  A, B, D, E, H, I, L, M, N, O, P, Q, S, T, V, W, X, Y, Z

  &C, &D, &F, &G, &K, &L, &P, &R, &S, &T, &V, &W, &Y, &Z

                           Extended AT Commands

  \A, \B, \G, \L, %C, %L, %Q

                                S Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S16, S18, S21,
  S22, S24, S25, S26, S29

  S30 S32, S33, S36, S37, S38, S39, S46, S48, S82, S86, S95

  Note: See MHI Help file for full command documentation.

                         Proprietary AT Command Set

                           MODULATION SELECTION

  Type:           Configuration

  Format:         AT [cmds] Fn [cmds]

  Description:    Controls line modulation unless automode is selected

     Command                             Function

       F0         Automode enabled

       F1         Force V.21 or Bell103 (according to ATB command) at
                  300bps

       F2         OK returned

       F3         Force V.23 75TX/1200RX originate or 1200TX/75RX answer
                  FSK

       F4         Force V.22 or Bell212A (according to ATB command) at
                  1200bps

       F5         Force V.22bis or Bell2400 (according to ATB command)

       F6         Force V.32 at 4800bps

       F7         Force V.32 at 7200bps

       F8         Force V.32 at 9600bps

       F9         Force V.32bis at 12000bps

       F10        Force V.32bis at 14400bps

  For proprietary command summary, see BANKSIA TECHNOLOGY PTY., LTD., MAC
                                 MODEM 288.

