
WISECOM, INC.

WS-3314JS3

Card Type                    Modem (asynchronous)
Chipset                      Rockwell
I/O Options                  Voice, microphone in, speaker out
Maximum Data Rate            33.6Kbps
Maximum Fax Rate             14.4Kbps
Data Bus                     16-bit ISA
Fax Class                    Class I
Data Modulation              Bell 103A/212A

                             ITU-T V.22, V.22bis, V.23, V.32, V.32bis,
                             V.34
Fax Modulation               ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression MNP5, V.42, V.42bis

[Image]

                                CONNECTIONS

          Function            Label            Function             Label

  Line in                     CN1     Speaker out                   CN3

  Line out                    CN2     Microphone in                 CN4

                           PLUG-N-PLAY SELECTION

         Setting                    JP6                     JP7

        Disabled             Pins 2 & 3 closed       Pins 2 & 3 closed

         Enabled             Pins 1 & 2 closed       Pins 1 & 2 closed

            Note: When Plug-N-Play mode is enabled, switches SW1/1
            through SW1/6 must be turned off.

         SERIAL PORT ADDRESS SELECTION

    Setting          SW1/1          SW1/2

  3F8h (COM1:)        On              On

  2F8h (COM2:)        Off             On

  3E8h (COM3:)        On             Off

  2E8h (COM4:)        Off            Off

                 INTERRUPT SELECTION

  Setting    SW1/3      SW1/4      SW1/5      SW1/6

   IRQ2        On        Off        Off        Off

   IRQ3       Off         On        Off        Off

   IRQ4       Off        Off        On         Off

   IRQ5       Off        Off        Off        On

                        SUPPORTED STANDARD COMMANDS

                             Basic AT Commands

  +++, comma, A/

  A, B, D, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z

  &C, &D, &F, &G, &K, &P, &Q, &S, &T, &V, &W, &Y, &Z

                           Extended AT Commands

  \A, \B, \K, \N

  %C, %E, %L, %Q

                            Special AT Commands

  +MS

                                S-Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18,
  S21, S22, S23, S24, S25

  S26, S27, S29, S30, S31, S32, S33, S36, S38, S39, S40, S41, S46, S48,
  S82, S86, S91, S92, S95

            Note: See MHI documentation for complete information.

  UNIDENTIFIED COMMANDS

   Command      Default

     S37           0

                         Proprietary AT Command Set

                            DISPLAY INFORMATION

  Type:          Immediate

  Format:        AT [cmds] In [cmds]

  Description:   Displays information requested about the modem.

    Command                              Function

       I0        Reports product identification code.

       I1        Reports ROM checksum.

       I2        Tests and reports ROM checksum.

       I3        Reports firmware revision and model ID.

       I6        Reports data pump ID.

