
BANKSIA TECHNOLOGY PTY, LTD.

PRO 34

Card Type                    Fax, Modem (synchronous/asynchronous)
Chip Set                     Unidentified
Maximum Data Rate            28.8Kbps
Maximum Fax Rate             14.4Kbps
Data Bus                     External
Fax Class                    Class I & II
Data Modulation Protocol     Bell 103/212A

                             ITU-T V.21, V.22, V.22bis, V.23, V.32,
                             V.32bis, V.34
Fax Modulation Protocol      ITU-T V.17, V.27ter, V.29
Error Correction/Compression MNP5, MNP10, V.42, V.42bis

[Image]

                                CONNECTIONS

         Function           Label             Function             Label

  Auxiliary port                 CN1       DC power                 CN4

  Line out                       CN2       Power switch             SW1

  RS-232/422                     CN3

                        USER CONFIGURABLE SETTINGS

                    Setting                        Label      Position

  DTR signal ignored                               SW1/1         On

  DTR signal normal                                SW1/1         Off

  DCD and DSR forced high                          SW1/2         On

  DCD and DSR normal                               SW1/2         Off

  Echo disabled                                    SW1/3         On

  Echo enabled                                     SW1/3         Off

  Result codes disabled                            SW1/4         On

  Result codes enabled                             SW1/4         Off

  Leased-line operation                            SW1/5         On

  Switched line operation                          SW1/5         Off

  Auto-answer enabled on 2nd ring                  SW1/6         On

  Auto-answer disabled on 2nd ring                 SW1/6         Off

  Synchronous mode 2 enabled                       SW1/7         On

  Synchronous mode 2 disabled                      SW1/7         Off

  Dumb mode                                        SW1/8         On

  Smart mode                                       SW1/8         Off

  Flow control to XON/XOFF enabled                 SW2/1         On

  Flow control to XON/XOFF disabled                SW2/1         Off

  V.25bis command set synchronous HDLC (NRZI)      SW2/2         On
  enabled

  V.25bis command set synchronous HDLC (NRZI)      SW2/2         Off
  disabled

  Factory configured - DO NOT ALTER                SW2/5     Unidentified

  Factory configured - DO NOT ALTER                SW2/6     Unidentified

  Factory configured - DO NOT ALTER                SW2/7     Unidentified

  Factory defaults loaded up on power-up           SW2/8         On

  Do not force factory defaults on power-up        SW2/8         Off

                              AUXILIARY PORT

      Setting            LK1            LK2          LK3          LK4

       PSTN           Pins 2 & 3     Pins 1 & 2      Open       Closed
                       closed          closed

    Leased-line       Pins 1 & 2     Pins 2 & 3      Open        Open
                       closed          closed

                      AUXILIARY PORT - CONTINUED

    Setting        LK5        LK6        LK7        LK8        LK9

     PSTN        Closed     Closed       Open      Closed      Open

  Leased-line    Closed      Open       Closed     Closed     Closed

                           MODULATION SELECTION

         Setting                   SW2/3                    SW2/4

  factory/stored setting            Off                      Off

      28800 carrier                 Off                      On

      14400 carrier                  On                      Off

       2400 carrier                  On                      On

                           SUPPORTED COMMAND SET

                             Basic AT Commands

  AT, Comma

  A, B, E, H, L, M, N, O, P, Q, S, T, V, W, X, Y, Z

  &C, &D, &G, &L, &R, &S, &V, &W, &X, &Y, &Z

                           Extended AT Commands

  \B, \G, \J, \V, \Y, \Z

                             Special Commands

  *H, )M

                                S Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18,
  S25, S26, S36, S37, S38

  Note: See MHI Help file for full command documentation.

                         Proprietary AT Command Set

   For a full command summary, see BANKSIA TECHNOLOGY PTY, LTD., PRO 144.

