
E-TECH RESEARCH, INC.

C1414CX PCMCIA

Card Type                    Modem (asynchronous)
Chipset                      Unidentified
Maximum Onboard Memory       SRAM (amount is unidentified)
Maximum Data Rate            14.4Kbps
Maximum Fax Rate             14.4Kbps
Data Bus                     PCMCIA Type II
Fax Class                    Class I
Data Modulation              Bell 103A/212A

                             ITU-T V.21, V.22, V.22bis, V.32, V.32bis
Fax Modulation               ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression MNP5, V.42, V.42bis

                                                                      53133

                        SUPPORTED STANDARD COMMANDS

                             Basic AT Commands

  +++, comma, A/

  A, B, D, E, F, H, L, M, N, O, P, Q, T, V, X, Y, Z

  &C, &D, &F, &G, &P, &S, &T, &V, &W, &Y, &Z

                           Extended AT Commands

  \A, \B, \C, \G, \J, \N, \O, \Q, \T, \U, \V, \X, \Y, \Z

  %A, %C, %E, %G, %Q

                            Special AT Commands

  -C, -J, "H, "O

                                S-Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S26,
  S30, S90, S108, S109

            Note: See MHI documentation for complete information.

                         Proprietary AT Command Set

                                   BREAK TYPE

  Type:                  Configuration

  Format:                AT [cmds] \Kn [cmds]

  Description:           Configures action of break signal

   Command      Break from DTE     Break from         Modem        Break from
                                       DTE        receives \B     remote modem
                Reliable/Normal
                     mode         Direct mode

     \K0        Enter command     Send break to   Buffers         Buffers
                mode, do not      remote modem    cleared and     cleared and
                send break to     immediately,    break sent to   break sent to
                remote modem.     then enter      remote modem.   DTE.
                                  command mode.

     \K1        Buffers cleared   Send break to   Buffers         Buffers
                and break sent    remote modem    cleared and     cleared and
                to remote         immediately.    break sent to   break sent to
                modem.                            remote modem.   DTE.

     \K2        Enter command     Send break to   Send break to   Send break to
                mode, do not      remote modem    remote modem    DTE
                send break to     immediately,    immediately.    immediately.
                remote modem.     then enter
                                  command mode.

     \K3        Send break to     Send break to   Send break to   Send break to
                remote modem      remote modem    remote modem    DTE
                immediately.      immediately.    immediately.    immediately.

     \K4        Enter command     Send break to   Send break to   Break sent
                mode, do not      remote modem    remote modem    with received
                send break to     immediately,    with            data to the
                remote modem.     then enter      transmitted     DTE.
                                  command mode.   data.

     \K5        Send break with   Send break to   Send break to   Break sent
                transmitted       remote modem    remote modem    with received
                data.             immediately.    with            data to the
                                                  transmitted     DTE.
                                                  data.

                            DISPLAY INFORMATION

  Type:          Immediate

  Format:        AT [cmds] In [cmds]

  Description:   Displays information requested about the modem.

    Command                              Function

       I0        Displays product identification code.

       I1        Displays ROM checksum.

       I2        Tests and displays ROM checksum.

       I3        Displays device set name.

       I4        Displays modem configuration.

                                SRAM BUFFER

  Type:             Configuration

  Format:           AT [cmds] Kn [cmds]

  Description:      Selects whether the modem will use its internal SRAM
                    to buffer data.

      Command                             Function

        K0          SRAM buffer disabled.

        K1          SRAM buffer enabled.

                              TRELLIS CODING

  Type:          Configuration

  Format:        AT [cmds] &Un [cmds]

  Description:   Selects whether the modem will use trellis coding.

    Command                              Function

      &U0         Trellis coding enabled.

      &U1         Trellis coding disabled.

