
ZOLTRIX, INC.

FM-HSP336I

Card Type                    Modem (asynchronous)
Chipset                      PCtel HSP/V.34+
I/O Options                  Voice, speakerphone
Maximum Data Rate            33.6Kbps
Maximum Fax Rate             14.4Kbps
Data Modulation              Bell 103A, 212A

                             ITU-T V.21, V.22, V.22bis, V.23, V.32,
                             V.32bis, V.34
Fax Modulation               ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression MNP5, V.42, V.42bis
Fax Class                    Class I
Data Bus                     16-bit ISA
Card Size                    Full height, half length

[Image]

                                CONNECTIONS

          Function             Label           Function             Label

  Telephone line out           CN1     Telephone line in            CN2

                        SUPPORTED STANDARD COMMANDS

                             Basic AT Commands

  +++, comma, A/

  A, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z

  &C, &D, &F, &G, &K, &P, &S, &T, &W, &Y, &Z

                           Extended AT Commands

  \A, \B, \G, \K, \L, \N

  %C, %L, %Q

                            Special AT Commands

  #CID

                                S-Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S30,
  S32, S33, S38, S86, S91

            Note: See MHI help file for complete information.

  UNIDENTIFIED COMMANDS

   Command      Default

     S34          13

                         Proprietary AT Command Set

                 AUTO-RETRAIN - AUTO-FALLBACK/FALL-FORWARD

  Type:          Configuration

  Format:        AT [cmds] %En [cmds]

  Description:   Controls auto-retrain mode and fallback/fall-forward.

    Command                              Function

      %E0        Auto-retrain disabled.

      %E1        Auto-retrain enabled.

      %E2        Auto-retrain and auto-fallback/fall-forward enabled.

      %E3        Auto-retrain and fast hangup enabled.

                          COMMUNICATION PROTOCOLS

  Type:           Configuration

  Format:         AT [cmds] Bn [cmds]

  Description:    Selects the communication protocol for low-speed data
                  calls.

    Command                              Protocol

       B0         Modem will use ITU-T V.22 at 1200bps.

       B1         Modem will use Bell 212A at 1200bps.

       B2         Modem will use ITU-T V.23 at 1200/75bps.

                               COUNTRY CODE

  Type:          Configuration

  Format:        AT [cmds] %In [cmds]

  Description:   Sets the modem's country code to the country specified.

    Command                              Function

      %I1        Set country code for the United States.

      %I2        Set country code for France.

      %I3        Set country code for Germany.

      %I4        Set country code for Italy.

      %I5        Set country code for Sweden.

      %I6        Set country code for the United Kingdom.

      %I7        Set country code for Japan.

      %I8        Set country code for Australia.

      %I9        Set country code for Spain.

      %I10       Set country code for Taiwan.

      %I11       Set country code for Singapore.

      %I12       Set country code for Korea.

      %I13       Set country code for Switzerland.

      %I14       Set country code for Norway.

      %I15       Set country code for the Netherlands.

      %I16       Set country code for Belgium.

      %I17       Set country code for Canada.

      %I18       Set country code for Ireland.

      %I19       Set country code for Portugal.

                COUNTRY CODE (CON'T)

  Command                   Function

   %I20     Set country code for Poland.

   %I21     Set country code for Hungary.

   %I22     Set country code for Finland.

   %I23     Set country code for Denmark.

                              CPU ALLOCATION

  Type:                  Configuration

  Format:                AT [cmds] %Nn [cmds]

  Default:               7

  Range:                 0 - 9

  Unit:                  10% of total CPU time

  Description:           Selects the maximum amount of CPU processing
                         time the modem will use. Setting %N to 0
                         disables dynamic CPU allocation.

                                   DIAL

  Type:                  Immediate

  Format:                AT [cmds] D<#>;[cmds]

  Description:           Dials the telephone number indicated according
                         to any modifiers included in the string.

        Command                              Function

           DL            Re-dial last number.

          DS=n           Dial stored telephone number n.

           DW            Dialing resumed following dial tone detection.

           D,            Dialing paused for amount of time specified in
                         S8 register.

           D!            Flash function initiated. Modem commanded to go
                         off-hook for specified time before returning
                         on-hook.

           D@            Wait for Quiet Answer function enabled. Modem
                         waits until a "quiet answer," a ring-back signal
                         followed by silence up to the time specified in
                         S7, is received prior to executing the rest of
                         the dial string.

           D^            Calling tone enabled for this call.

           D;            Modem returned to idle state after dialing. The
                         semicolon can only be placed at the end of the
                         dial command.

                       DISPLAY CHIPSET MANUFACTURER

  Type:          Immediate

  Format:        AT [cmds] #MFR? [cmds]

  Description:   Displays the voice chipset manufacturers name.

                        DISPLAY CHIPSET MODEL NAME

  Type:          Immediate

  Format:        AT [cmds] #MDL? [cmds]

  Description:   Displays the model name of the modem's voice chipset.

                         DISPLAY CHIPSET REVISION

  Type:          Immediate

  Format:        AT [cmds] #REV? [cmds]

  Description:   Displays the revision level of the modem's voice
                 chipset.

                            DISPLAY INFORMATION

  Type:          Immediate

  Format:        AT [cmds] In [cmds]

  Description:   Displays information requested about the modem.

    Command                              Function

       I0        Displays product identification code.

       I1        Displays hardware variation code.

       I2        Displays internal code.

       I3        Displays firmware revision.

       I4        Displays feature bitmap.

                             DISPLAY PROFILES

  Type:          Immediate

  Format:        AT [cmds] &Vn [cmds]

  Description:   Displays the stored profile requested.

    Command                              Function

      &V0        Displays the active profile.

      &V1        Displays stored profiles.

      &V2        Displays phone numbers stored with the &Z command.

                    ESCAPE SEQUENCE - INVALID SEQUENCE

  Type:                  Configuration

  Format:                AT [cmds] *Qn [cmds]

  Description:           Sets the modem's response when an invalid TIES
                         escape sequence is entered, but the OK response
                         code has already been sent.

        Command                              Function

          *Q0            Modem returns CONNECT response.

          *Q1            Modem does not return CONNECT response.

                                LINE SPEED

  Type:                Register

  Format               AT [cmds] S37=n [cmds]

  Description:         Sets the maximum allowable data exchange rate
                       attempted during handshake process.

       Command                              Function

        S37=0          Auto-detect fastest common speed.

        S37=3          Set speed to 300bps.

        S37=4          Set speed to 1200bps.

        S37=6          Set speed to 2400bps.

        S37=7          Set speed to 4800bps.

        S37=8          Set speed to 7200bps.

        S37=9          Set speed to 9600bps.

       S37=10          Set speed to 12Kbps.

       S37=11          Set speed to 14.4Kbps.

       S37=12          Set speed to 28.8Kbps.

                              MODE SELECTION

  Type:          Immediate

  Format:        AT [cmds] #CLS=n [cmds]

  Description:   Selects which mode the modem will operate in.

    Command                              Function

     #CLS=0      Modem will operate in data mode.

     #CLS=1      Modem will operate in fax class 1 mode.

     #CLS=8      Modem will operate in voice mode.

                              TEST MODE - PTT

  Type:          Immediate

  Format:        AT [cmds] %Pnn [cmds]

  Description:   Send PTT test signals for line tests.

    Command                              Function

      %P00       Send DTMF digit 0.

      %P01       Send DTMF digit 1.

      %P02       Send DTMF digit 2.

      %P03       Send DTMF digit 3.

      %P04       Send DTMF digit 4.

      %P05       Send DTMF digit 5.

      %P06       Send DTMF digit 6.

      %P07       Send DTMF digit 7.

      %P08       Send DTMF digit 8.

      %P09       Send DTMF digit 9.

      %P10       Send DTMF digit A.

      %P11       Send DTMF digit B.

      %P12       Send DTMF digit C.

      %P13       Send DTMF digit D.

      %P14       Send DTMF digit *.

                         TEST MODE - PTT (CON'T)

    Command                             Function

     %P15        Send DTMF digit #.

     %P16        Send V.21 channel 1 mark symbol.

     %P17        Send V.21 channel 2 mark symbol.

     %P18        Send V.23 backward channel mark symbol.

     %P19        Send V.23 forward channel mark symbol.

     %P20        Send V.22 originate mark symbol.

     %P21        Send V.22bis originate mark symbol.

     %P22        Send V.22 answer signal with guard tone if required.

     %P23        Send V.22bis answer signal with guard tone if required.

     %P24        Send V.21 channel 1 space symbol.

     %P25        Send V.21 channel 2 space symbol.

     %P26        Send V.23 backward channel space symbol.

     %P27        Send V.23 forward channel space symbol.

     %P28        Send V.32 9600bps carrier.

     %P29        Send V.32bis 14.4Kbps carrier.

     %P30        Send silence (on-line), i.e., go off-hook.

     %P31        Send V.25 answer tone.

     %P32        Send 1800 Hz guard tone.

     %P33        Send 1300Hz V.25 calling tone.

     %P34        Send 1100Hz fax calling tone.

     %P35        Send V.21 channel 2 mark symbol.

     %P36        Send V.27ter 2400bps carrier.

     %P37        Send V.27ter 4800bps carrier.

     %P38        Send V.29 7200bps carrier.

     %P39        Send V.29 9600bps carrier.

     %P40        Send V.17 7200bps long train carrier.

     %P41        Send V.17 7200bps short train carrier.

     %P42        Send V.17 9600bps long train carrier.

     %P43        Send V.17 9600bps short train carrier.

     %P44        Send V.17 12Kbps long train carrier.

     %P45        Send V.17 12Kbps short train carrier.

     %P46        Send V.17 14.4Kbps long train carrier.

     %P47        Send V.17 14.4Kbps short train carrier.

     %P48        Send V.34 2400bps carrier.

     %P49        Send V.34 4800bps carrier.

     %P50        Send V.34 7200bps carrier.

     %P51        Send V.34 9600bps carrier.

     %P52        Send V.34 12Kbps carrier.

     %P53        Send V.34 14.4Kbps carrier.

     %P54        Send V.34 16.8Kbps carrier.

     %P55        Send V.34 19.2Kbps carrier.

     %P56        Send V.34 21.6Kbps carrier.

     %P57        Send V.34 24Kbps carrier.

     %P58        Send V.34 26.4Kbps carrier.

                          TEST MODE - PTT (CON'T)

     Command                             Function

      %P59         Send V.34 28.8Kbps carrier.

      %P60         Send V.32bis 9600bps carrier.

      %P61         Send V.32bis 12Kbps carrier.

      %P62         Send Bell 212A originate carrier.

      %P63         Send Bell 212A answer carrier.

      %P64         Send Bell 103 originate mark signal.

      %P65         Send Bell 103 originate space signal.

      %P66         Send Bell 103 answer mark symbol.

      %P67         Send Bell 103 answer space symbol.

     %P99,n        Range:               0 - 23

                   Unit:                150 Hz

                   Description:         The modem will return the
                                        strength of the signal at the
                                        specified frequency.

                           SPEAKERPHONE OPTIONS

  Type:               Configuration

  Format:             AT [cmds] #SPK=x,y,z [cmds]

  Description:        Sets various options for speakerphone functions.

       Command                              Function

         x=0           Microphone enabled.

         x=1           Microphone disabled.

         x=2           Microphone enabled with maximum gain, speaker
                       disabled.

          y            Default:            5

                       Range:              0 - 16

                       Unit:               -2 dBm

                       Description:        Sets the attenuation level for
                                           speaker output in voice mode.
                                           A value of 16 will mute the
                                           speaker.

         z=0           Microphone gain set to 0 dBm.

         z=1           Microphone gain set to 6 dBm.

         z=2           Microphone gain set to 9.5 dBm.

         z=3           Microphone gain set to 12 dBm.

                              TONE DETECTION

  Format:                    AT [cmds] #VTD=x,y,z [cmds]

  Default:                   x,y,z 63

  Range:                     0 - 63

  Description:               Sets which tones the tone detection will
                             report.

  Note:                      The value of x sets the tone detection modes
                             in voice transmit mode, y sets them in voice
                             receive mode, and z sets them in voice
                             command mode.

        Bit           Value                     Function

         0                  0   DTMF tones are not detected.

                           1    DTMF tones are detected.

         1                  0   V.25 1300Hz calling tone is not detected.

                           1    V.25 1300Hz calling tone is detected.

         2                  0   T.30 1100Hz fax tone is not detected.

                           1    T.30 1100Hz fax tone is detected.

         3                  0   V.25/T.30 2100Hz answer tone is not
                                detected.
                           1
                                V.25/T.30 2100Hz answer tone is detected.

         4                  0   Bell 2225Hz answer tone is not detected.

                           1    Bell 2225Hz answer tone is detected.

         5                  0   Call progress tones are not detected.

                           1    Call progress tones are detected.

                       TONE GENERATOR - DIRECT ENTRY

  Type:             Immediate

  Format:           AT [cmds] #VTS=[m, n, x]

  Range:            m 200-3000, n 200-3000, x 0-255

  Unit:             m 1 Hz, n 1 Hz, x .1 second

  Description:      Generates a dual-frequency tone for duration x at
                    frequencies m and n.

                     TONE GENERATOR - TIMED PHONE KEYS

  Type:           Immediate

  Format:         AT [cmds] #VTS={a, n}

  Range:          a 0-9, A-D, #, *; x 0-255

  Unit:           x .1 second

  Description:    Generates the DTMF tone for duration x for the
                  character a.

                           TONE GENERATOR LENGTH

  Format         AT [cmds] #VBT=n [cmds]

  Default:       10

  Range:         0 - 40

  Unit:          0.1 second

  Description:   Sets the length of DTMF tones that are generated.

                              TRELLIS CODING

  Type:          Configuration

  Format:        AT [cmds] &Un [cmds]

  Description:   Selects whether the modem will use trellis coding.

    Command                              Function

      &U0         Trellis coding enabled.

      &U1         Trellis coding disabled.

                              V.34 BAUD RATE

  Type:          Configuration

  Format:        AT [cmds] S35=n [cmds]

  Description:   Sets the maximum baud rate for V.34.

    Command                              Function

     S35=0       Maximum baud rate set to 2400 baud.

     S35=1       Maximum baud rate set to 2743 baud.

     S35=2       Maximum baud rate set to 2800 baud.

     S35=3       Maximum baud rate set to 3000 baud.

     S35=4       Maximum baud rate set to 3200 baud.

     S35=5       Maximum baud rate set to 3429 baud.

                            VOICE BUFFER SPACE

  Type:                  Configuration

  Format:                AT [cmds] #VSK=n [cmds]

  Default:               255

  Range:                 0 - 255

  Unit:                  1 byte

  Description:           Sets the amount of data the modem can send into
                         the buffer after the XOFF signal is sent.

                               VOICE DEVICE

  Type:                  Configuration

  Format:                AT [cmds] #VLS=n [cmds]

  Description:           Selects the I/O device for the DSP chip.

  Note:                  This modem may not support all options listed
                         below. The #VLS? command will display the
                         available options.

        Command                              Function

         #VLS=0          Telephone line and handset used for voice I/O.

         #VLS=1          Telephone handset used for voice I/O.

         #VLS=2          Internal speaker only used for voice I/O.

         #VLS=3          External microphone only used for voice I/O.

         #VLS=4          Telephone line and handset used for voice I/O;
                         internal speaker enabled.

         #VLS=6          Speakerphone used for voice I/O.

                        VOICE - DISPLAY BUFFER SIZE

  Type:          Immediate

  Format:        AT [cmds] #VBQ? [cmds]

  Description:   Displays the size of the voice buffer.

                     VOICE - DISPLAY COMPRESSION TYPE

  Type:          Immediate

  Format:        AT [cmds] #VCI? [cmds]

  Description:   Displays the type of compression currently in use.

                             VOICE GAIN LEVEL

  Type:          Configuration

  Format:        AT [cmds] #RG=hhhh [cmds]

  Default:       7FFF

  Range:         0000 - 7FFF

  Unit:          Unidentified (hexadecimal)

  Description:   Sets the gain level for recording audio in voice mode.

                      VOICE - LOCAL SERIAL PORT SPEED

  Type:                  Configuration

  Format:                AT [cmds] #BDR=n [cmds]

  Default:               0

  Range:                 0 - 48

  Unit:                  2400bps

  Description:           Sets the speed of the local serial port when in
                         voice mode. A value of 0 indicates that the
                         modem should auto-detect the correct serial port
                         speed.

                         VOICE RE-RING DETECT TIME

  Type:                  Configuration

  Format:                AT [cmds] #VRA=n [cmds]

  Default:               70

  Range:                 0-255

  Unit:                  10 mS

  Description:           Sets the maximum time the modem will wait for
                         the remote station to ring again before it
                         assumes that it has gone off-hook.

                               VOICE RECEIVE

  Type:          Immediate

  Format:        AT [cmds] #VRX

  Description:   Commands the modem to begin receiving voice data.

                          VOICE RING DETECT TIME

  Type:                  Configuration

  Format:                AT [cmds] #VRN=n [cmds]

  Default:               Unidentified

  Range:                 Unidentified

  Unit:                  Unidentified

  Description:           Sets the maximum time the modem will wait for
                         the remote station to ring before it assumes
                         that it went off-hook before it rang.

                       VOICE SILENCE DETECTION TIME

  Type:           Configuration

  Format:         AT [cmds] #VSP=n [cmds]

  Default:        Unidentified

  Range:          0 - 255

  Unit:           .1 second

  Description:    Sets the minimum amount of silence that the modem will
                  detect.

                     VOICE SILENCE DETECTION THRESHOLD

  Type:                 Configuration

  Format:               AT [cmds] #VSS=n [cmds]

  Description:          Sets the threshold of sensitivity that the modem
                        uses to determine silence detection.

       Command                              Function

        #VSS=0          Silence detection disabled.

        #VSS=1          Minimum silence detection sensitivity.

        #VSS=2          Standard silence detection sensitivity.

        #VSS=3          Maximum silence detection sensitivity.

                         VOICE TRANSMISSION LEVEL

  Type:           Configuration

  Format:         AT [cmds] #TL=hhhh [cmds]

  Default:        3FFF

  Range:          0000 - 7FFF

  Unit:           Unidentified (hexadecimal)

  Description:    Sets the transmission level for sending audio in voice
                  mode.

                              VOICE TRANSMIT

  Type:          Immediate

  Format:        AT [cmds] #VTX

  Description:   Commands the modem to begin transmitting voice data.

