
MOTOROLA, INC.

BITSURFR PRO ISA

Card Type     ISDN TA
Chip Set      Unidentified
I/O Options   Analog adapters (2)
Transfer Rate 56Kbps x 2/64Kbps x 2
Data Bus      16-bit ISA
ISDN Protocol AIMux, PPP, V.120
Switch Type   5ESS, DMS-100, NI-1
Card Size     Full-height, unidentified length

[Image]

                                CONNECTIONS

           Function             Label           Function            Label

  ISDN U interface              CN1     Analog adapter 2            CN3

  Analog adapter 1              CN2

                  SUPPORTED STANDARD COMMANDS

                       Basic AT Commands

  +++, A/

  A, E, H, O, V, W, X, Z

  &F, &S, &W, &Y, &Z

                     Extended AT Commands

  \Q

                          S-Registers

  S0, S1, S2, S3, S4, S5, S7, S10, S12, S18, S25

            Note:See MHI help file for complete information.

Proprietary AT Command Set

                          AUTHENTICATION PROTOCOL

  Type:                      Configuration

      Format:                AT [cmds] @M2= x [cmds]

      Description:           Selects whether the TA will use an
                             authentication protocol.

            Command                           Function

            @M2=N           TA will not use authentication protocol.

             @M2=P           TA will use PAP authentication protocol.

                                COMMAND SET

  Type:                      Configuration

      Format:                AT [cmds] @P1= n [cmds]

      Description:           Selects whether the TA will use the AT
                             command set.

            Command                            Function

            @P1=A           AT command set enabled.

             @P1=N           Command set disabled

                              COMMAND TARGET

  Type:                      Immediate

      Format:                AT [cmds] >C n [cmds]

      Description:           Selects which I/O interface the issued
                             commands will target.

             Command                           Function

              >C0           Issued commands will affect the COM port
                             interface.

               >C1           Issued commands will affect programmed I/O
                             port 1.

               >C2           Issued commands will affect programmed I/O
                             port 2.

               >C3           Issued commands will affect programmed I/O
                             port 3.

                             DTR DIALING DELAY

  Type:             Configuration

  Format:           AT [cmds] &L2= n [cmds]

  Default:          8

  Range:            1 - 255

  Unit:             1 second

  Description:      Sets the amount of time the TA will wait between DTR
                    dialing attempts.

See document MOTOROLA, INC. BITSURFR PRO EZ for a full command summary.

