
MOTOROLA, INC.

VANGUARD 320

Card Type              Frame relay adapter, Ethernet router
Processor              Motorola 68360
Processor Speed        Unidentified
Chip Set               Unidentified
Maximum Onboard Memory 12MB DRAM/2MB Flash RAM
I/O Options            Serial ports (3), control port, telephony ports (2)
Network Transfer Rate  10Mbps
Topology               Star
Wiring Type            Unshielded twisted pair
DSU Transfer Rate      56Kbps
DSU Protocol           DDS
ISDN Transfer Rate     64Kbps x 2
ISDN Protocol          Unidentified
ISDN Switch Type       Unidentified
Data Bus               Serial

[Image]

                                CONNECTIONS

          Function             Label           Function           Label

  Reset button                  BT1      Serial control port       CN4
                                         (port 3)

  Header for daughtercard 1     CN1      V.11, V.24, V.35, or      CN5
  (port 1)                               V.36 serial port ,
                                         or DSU port (port 4)

  Header for daughtercard 2     CN2      DC power in               CN6
  (port 2)

  UTP connector                 CN3

                        USER CONFIGURABLE SETTINGS

                 Setting                     Label          Position

          Port 3 pin 22 used for ring       SW1/1            Off
           indicator

           Port 3 pin 22 used to enter       SW1/1             On
           test mode in DCE mode, ring
           indicator in DTE mode

          Port 3 pin 25 used for busy       SW1/2            Off
           out indicator

           Port 3 pin 25 used for test       SW1/2             On
           mode indicator for DTE mode,
           busy out for DCE mode

          Factory configured - do not       SW1/3        Unidentified
           alter

          Port 4 is normal serial port      SW1/4            Off

           Port 4 is the PAD port            SW1/4             On
           (forces serial configuration
           to 9600bps, no parity, 8 data
           bits, 1 stop bit)

          Normal operation                  SW1/5            Off

           Enter diagnostic test mode        SW1/5             On

          Normal operation                  SW1/6            Off

           Reset entire configuration to     SW1/6             On
           factory defaults

            Note:To use SW1/6, power up the adapter, turn SW1/6 on, press
            the reset button, and turn SW1/6 back off again.

                  DRAM

   Setting      On Board         S1

     4MB           4MB          None

     8MB           4MB       (1) 4M x 9

     12MB          4MB       (1) 8M x 9

                                PORT 3 TYPE

  Setting     SW2/1      SW2/2     SW2/3     SW2/4      SW2/5     SW2/6

  V.11 DTE     Off        Off       Off       Off        Off        On

  V.11 DCE     Off        Off       Off       Off        Off        On

  V.24 DTE      On        On        On         On        On        Off

  V.24 DCE      On        On        On         On        On        Off

  V.35 DTE     Off        Off       Off       Off        Off        On

  V.35 DCE     Off        Off       Off       Off        Off        On

  V.36 DTE     Off        Off       Off       Off        Off        On

  V.36 DCE     Off        Off       Off       Off        Off        On

    DSU        Off        Off       Off       Off        Off        On

                            PORT 3 TYPE (CONT)

  Setting         SW2/7              SW2/8                  U1

  V.11 DTE          On                On          V.11 module in position
                                                             1

  V.11 DCE          On                On          V.11 module in position
                                                             2

  V.24 DTE         Off                Off         V.24 module in position
                                                             1

  V.24 DCE         Off                Off         V.24 module in position
                                                             2

  V.35 DTE          On                On          V.35 module in position
                                                             1

  V.35 DCE          On                On          V.35 module in position
                                                             2

  V.36 DTE          On                On          V.36 module in position
                                                             1

  V.36 DCE          On                On          V.36 module in position
                                                             2

    DSU             On                On           DSU module in position
                                                             1

                             DIAGNOSTIC LED(S)

     LED          Color           Status               Condition

    LED1       Unidentified         On            Software is running

    LED1       Unidentified        Off         Hardware failure detected

    LED1       Unidentified      Blinking      Software is downloading or
                                                    card is booting

    LED2       Unidentified         On                Power is on

    LED2       Unidentified        Off               Power is off

    LED3       Unidentified         On                Test failed

    LED3       Unidentified        Off        No test in progress or test
                                                        passed

    LED3       Unidentified      Blinking          Test in progress

    LED4       Unidentified         On            Hardware or software
                                                   failure detected

    LED4       Unidentified        Off             Normal operation

    LED5       Unidentified         On         Card is transmitting SPACE
                                                   signal to network

    LED5       Unidentified        Off         Card is transmitting MARK
                                                   signal to network

    LED6       Unidentified         On          Card is receiving SPACE
                                                  signal from network

    LED6       Unidentified        Off           Card is receiving MARK
                                                  signal from network

    LED7       Unidentified         On         Card is transmitting SPACE
                                                   signal to port 4

    LED7       Unidentified        Off         Card is transmitting MARK
                                                   signal to port 4

    LED8       Unidentified         On          Card is receiving SPACE
                                                  signal from port 4

    LED8       Unidentified        Off           Card is receiving MARK
                                                  signal from port 4

    LED9       Unidentified         On         Card is transmitting SPACE
                                                   signal to port 3

    LED9       Unidentified        Off         Card is transmitting MARK
                                                   signal to port 3

    LED10      Unidentified         On          Card is receiving SPACE
                                                  signal from port 3

    LED10      Unidentified        Off           Card is receiving MARK
                                                  signal from port 3

    LED11      Unidentified         On         Card is transmitting SPACE
                                                   signal to port 2

    LED11      Unidentified        Off         Card is transmitting MARK
                                                   signal to port 2

    LED12      Unidentified         On          Card is receiving SPACE
                                                  signal from port 2

    LED12      Unidentified        Off           Card is receiving MARK
                                                  signal from port 2

    LED13      Unidentified         On         Card is transmitting SPACE
                                                   signal to port 1

    LED13      Unidentified        Off         Card is transmitting MARK
                                                   signal to port 1

    LED14      Unidentified         On          Card is receiving SPACE
                                                  signal from port 1

    LED14      Unidentified        Off           Card is receiving MARK
                                                  signal from port 1

[Image]

                                CONNECTIONS

        Function            Label            Function             Label

  Header to main board       CN1       V.11 V.24, V.35, V.36,      CN2
  (on both front and                   or DSU port
  back of card)

                        USER CONFIGURABLE SETTINGS

                   Setting                      Label        Position

          Pin 22 used for ring indicator        P22            RI

           Pin 22 used to enter test mode        P22            TM
           in DCE mode, ring indicator in
           DTE mode

          Pin 25 used for busy out              P25            TM
           indicator

           Pin 25 used for test mode             P25            RI
           indicator for DTE mode, busy out
           for DCE mode

                             SERIAL PORT TYPE

  Setting     SW1/1      SW1/2     SW1/3     SW1/4      SW1/5     SW1/6

  V.11 DTE     Off        Off       Off       Off        Off        On

  V.11 DCE     Off        Off       Off       Off        Off        On

  V.24 DTE      On        On        On         On        On        Off

  V.24 DCE      On        On        On         On        On        Off

  V.35 DTE     Off        Off       Off       Off        Off        On

  V.35 DCE     Off        Off       Off       Off        Off        On

  V.36 DTE     Off        Off       Off       Off        Off        On

  V.36 DCE     Off        Off       Off       Off        Off        On

    DSU        Off        Off       Off       Off        Off        On

                         SERIAL PORT TYPE (CONT)

  Setting         SW1/7              SW1/8                  U1

  V.11 DTE          On                On          V.11 module in position
                                                             1

  V.11 DCE          On                On          V.11 module in position
                                                             2

  V.24 DTE         Off                Off         V.24 module in position
                                                             1

  V.24 DCE         Off                Off         V.24 module in position
                                                             2

  V.35 DTE          On                On          V.35 module in position
                                                             1

  V.35 DCE          On                On          V.35 module in position
                                                             2

  V.36 DTE          On                On          V.36 module in position
                                                             1

  V.36 DCE          On                On          V.36 module in position
                                                             2

    DSU             On                On           DSU module in position
                                                             1

Card Type          ISDN TA
ISDN Transfer Rate 64Kbps x 2
ISDN Protocol      Unidentified
Switch Type        Unidentified

[Image]

                                CONNECTIONS

        Function           Label             Function             Label

  Header to main board      CN1       ISDN S/T interface           CN2
  (on both front and
  back of card)

                                      ISDN S/T interface           CN3

            Note:Two connectors are provided so the user can daisy-chain
            devices on the S/T bus.

                        USER CONFIGURABLE SETTINGS

                   Setting                      Label        Position

     S/T bus terminated                         SW1            Off

      S/T bus not terminated                     SW1            On

VANGUARD 320 (ISDN U DAUGHTERCARD)

Card Type          ISDN TA
ISDN Transfer Rate 64Kbps x 2
ISDN Protocol      Unidentified
Switch Type        Unidentified

[Image]

                                CONNECTIONS

        Function           Label             Function             Label

  Header to main board      CN1       ISDN U interface             CN2
  (on both front and
  back of card)

Card Type           DDS DSU
DSU Transfer Rate   56Kbps
Modulation Protocol Unidentified

[Image]

                                CONNECTIONS

        Function            Label            Function             Label

  Header to main board       CN1       Line out                    CN2
  (on both front and
  back of card)

