
BOCA RESEARCH, INC.

SOUND EXPRESSION (SE34SRS),

SOUND EXPRESSION (SE34SVD)

Card Type                           Sound/Modem card
Chip Set                            Unidentified
Maximum Onboard Memory              Unidentified
I/O Options                         Game/MIDI port, CD-ROM interface -
                                    IDE, Audio in - CD-ROM (3), speaker,
                                    line out, line in, microphone in,
                                    telephone jack
Maximum Modem Rate                  28.8Kbps
Maximum Fax Rate                    14.4Kbps
Data Modulation Protocol            Bell 103A/212A

                                    ITU-T V.22, V.22bis, V.32, V.32bis,
                                    V.34

                                    Rockwell V.FC
Fax Modulation Protocol             ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression        MNP5, V.42, V.42bis
Fax Class                           Class I & II
Data Bus                            16-bit ISA

[Image]

                                CONNECTIONS

      Function            Location             Function         Location

  Game/MIDI port      CN1    Wavetable                      CN6

  Speaker             CN2    CD-ROM interface -             CN7
                             IDE

  Line out            CN3    Audio in - CD-ROM               J9
                             (Mitsumi)

  Line in             CN4    Audio in - CD-ROM              J10
                             (Panasonic)

  RJ-11 telephone     CN5    Audio in - CD-ROM              J11
  jack                       (Sony/IDE)

                           SUPPORTED COMMAND SET

                             Basic AT Commands

  AT, +++, comma, A/

  A, B, C, E, H, L, M, O, Q, R, S, T, U, V, W, X, Y, Z

  &C, &F, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z

                           Extended AT Commands

  \A, \B

  %C, %E, %L, %Q

                                S Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18,
  S21, S22, S23, S24, S25,

  S26, S27, S28, S29, S30,S31, S32, S33, S36, S38, S39, S40, S41, S46,
  S48, S82, S86, S91, S92,

  S95

                             Special Commands

  +MS?, +MS

  Note: See MHI Help File for full command documentation.

                         Proprietary AT Command Set

                                   DIAL

  Type:                  Immediate

  Format:                AT [cmds] D<#> [cmds]

  Description:           Dials telephone number according to any
                         modifiers included in the string

  Note:                  Any combination of modifiers can be used to
                         produce the desired dial functions in sequence.

        Command                              Function

           D             Dial

          DL             Re-dial last number

          DP             Pulse dialing enabled

         DS=n            Dial stored telephone number n

          DT             Tone dialing enabled/Pulse dialing disabled

          DW             Dialing resumed following dial tone detection

          D,             Dialing paused for amount of time specified in
                         S8 register

          D!             Flash function initiated. Modem commanded to go
                         off-hook for specified time before returning
                         on-hook.

          D@             Wait for Quite Answer function enabled. Modem
                         waits until a "quiet answer," a ring-back signal
                         followed by silence up to the time specified in
                         S7, is received prior to executing the rest of
                         the dial string.

          D;             Modem returned to idle state after dialing. The
                         semicolon can only be placed at the end of the
                         dial command.

          D^             Disable dialing code.

                            REPORT INFORMATION

  Type:          Immediate

  Format:        AT [cmds] In [cmds]

  Description:   Displays information requested

    Command                              Function

       I0        Reports product ID

       I1        Reports checksum

       I2        Tests and reports ROM checksum

       I3        Reports firmware revision

       I4        Reports OEM-defined identifier string.

       I5        Reports country code

       I6        Reports modem data pump model

                            AUTO-MODE DETECTION

  Type:                  Configuration

  Format:                AT [cmds] Nn [cmds]

  Description:           Selects various options for the automatic
                         detection and negotiation of protocols during
                         the handshake process if the modem is
                         communicating with a remote modem of dissimilar
                         speed.

        Command                              Function

          N0             Auto-mode detection disabled

          N1             Permits handshaking at any speed supported by
                         both modems.

                                     DATA TERMINAL READY (DTR)

  Type:                      Configuration

  Format:                    AT [cmds] &Dn [cmds]

  Description:               Selects modem response to DTR

            Note: The action each variant of &D causes depends on the setting of &Q

         &Q Setting                &D0              &D1               &D2                &D3

       &Q0, &Q5, &Q6            Command 0        Command 3         Command 2          Command 4

          &Q1, &Q4              Command 1        Command 3         Command 2          Command 4

          &Q2, &Q3              Command 2        Command 2         Command 2          Command 2

          Command                                          Function

         Command 0           Modem does not respond to DTR

         Command 1           Modem disconnects (hangs up) after DTR goes off; Auto-Answer not
                             affected

         Command 2           Modem goes to command mode and disconnects (hangs up) after DTR goes
                             off; Auto-Answer is disabled.

          Command            Asynchronous escape sequence

             3

         Command 4           Modem does a soft reset

                               FLOW CONTROL

  Type:          Configuration

  Format:        AT [cmds] &Kn [cmds]

  Description:   Enables flow control options

    Command                              Function

      &K0        Flow control disabled

      &K3        RTS/CTS flow control enabled

      &K4        XON/XOFF flow control enabled

      &K5        Enable transport XON/XOFF

      &K6        Enable both RTS/CTS and XON/XOFF

                                             BREAK TYPE

  Type:                          Configuration

  Format:                        AT [cmds] \Kn [cmds]

  Description:                   Configures action of break signal

      Command            Break from DTE         Break from DTE during        Break received from
                                                     Direct Mode                remote modem

        \K0           Online command mode      Break sent to remote       Buffers cleared, break
                      enabled, send no         modem and command          sent to DTE
                      break to remote modem    entered

        \K1           Break sent to remote     Break sent to remote       Buffers cleared, break
                      modem and buffered       modem and command          sent to DTE
                      cleared                  entered

        \K2           Online command mode      Send break with            Break sent immediately to
                      enabled, send no         transmitted data           DTE
                      break to remote modem

        \K3           Send break to remote     Break sent to remote       Break sent immediately to
                      modem immediately        modem and command          DTE
                                               entered

        \K4           Online command mode      Send break with            Break sent with received
                      enabled, send no         transmitted data           data to the DTE
                      break to remote modem

        \K5           Send break with          Send break with            Break sent with received
                      transmitted data         transmitted data           data to the DTE

                               CONNECT MODE

  Type:          Configuration

  Format:        AT [cmds] \Nn [cmds]

  Description:   Controls the type of connection the modem will operate
                 in

    Command                              Function

      \N0        Normal mode enabled

      \N1        Direct mode enabled

      \N2        MNP reliable mode enabled

      \N3        Auto-reliable mode or MNP auto-reliable mode enabled

      \N4        V.42 reliable mode enabled

      \N5        V.42 auto-reliable mode or MNP auto-reliable mode
                 enabled

                              DCE LINE SPEED

  Type:                Register

  Format               AT [cmds] S37=n [cmds]

  Description:         Sets the maximum allowable data exchange rate
                       attempted during handshake process.

       Command                              Function

        S37=0          Speed of last connection

       S37=1-3         300bps

        S37=4          Reserved

        S37=5          1200bps

        S37=6          2400bps

        S37=7          V.23 mode

        S37=8          4800bps

        S37=9          9600bps

       S37=10          12.0Kbps

       S37=11          14.4Kbps

       S37=12          7200bps

                                RESULT CODES

                            BASIC RESULT CODES

   Numeric         Verbose          Wn               Function

      0               OK            W0    Modem has successfully executed
                                          the previous command and has
                                          returned to the on-line command
                                          state.

      1            CONNECT          W0    Connection established at
                                          unspecified rate.

      2              RING           W0    Incoming ring detected.

      3           NO CARRIER        W0    Carrier signal lost or no
                                          connection established.

      4             ERROR           W0    Last command issued was not
                                          valid.

      5          CONNECT 1200       W0    Connection established at
                                          1200bps.

      6          NO DIALTONE        W0    No dial tone was detected
                                          within the time allotted by S7.

      7              BUSY           W0    A busy tone was detected after
                                          dialing.

      8           NO ANSWER         W0    No quiet answer (ring-back
                                          followed by silence) was
                                          detected.

      9          CONNECT 600        WO    Connection established at
                                          600bps

      10         CONNECT 2400       W0    Connection established at
                                          2400bps.

      11         CONNECT 4800       W0    Connection established at
                                          4800bps.

      12         CONNECT 9600       W0    Connection established at
                                          9600bps.

      13         CONNECT 7200       WO    Connected as data modem during
                                          answer.

      14        CONNECT 12000       WO    Connection established at
                                          12000bps.

      15        CONNECT 14400       W0    Connection established at 14.4K
                                          bps.

      16        CONNECT 19200       W0    Connection established at 19.2K
                                          bps.

      17        CONNECT 38400       W0    Connection established at 38.4K
                                          bps.

      18        CONNECT 57600       W0    Connection established at 57.6K
                                          bps.

      19        CONNECT 115200      W0    Connection established at
                                          115.2K bps.

                        BASIC RESULT CODES (cont'd)

   Numeric          Verbose         Wn                Function

     22         CONNECT 75/1200     W0     Connection established at
                                           transmit 75/receive 1200bps.

     23         CONNECT 1200/75     W0     Connection established at
                                           transmit 1200/receive 75bps.

     24             DELAYED         WO     Connection fails and number
                                           dialed is "delayed" due to
                                           country blacklisting.

     32           BLACKLISTED       WO     Connection failed and the
                                           number dialed is considered
                                           "blacklisted"

     33               FAX           W0     Fax connection established.

     35              DATA           W0     Data connection established.

                           EXTENDED RESULT CODES

   Numeric          Verbose          Wn               Function

     40           CARRIER 300        W1     Carrier signal at 300bps is
                                            detected.

     44         CARRIER 1200/75      W1     Carrier signal at transmit
                                            1200/receive 75bps is
                                            detected.

     45         CARRIER 75/1200      W1     Carrier signal at transmit
                                            1200/receive 75bps is
                                            detected.

     46           CARRIER 1200       W1     Carrier signal at 1200bps is
                                            detected.

     47           CARRIER 2400       W1     Carrier signal at 2400bps is
                                            detected.

     48           CARRIER 4800       W1     Carrier signal at 4800bps is
                                            detected.

     49           CARRIER 7200       W1     Carrier signal at 7200bps is
                                            detected.

     50           CARRIER 9600       W1     Carrier signal at 9600bps is
                                            detected.

     51          CARRIER 12000       W1     Carrier signal at 12.0K bps
                                            is detected.

     52          CARRIER 14400       W1     Carrier signal at 14.4K bps
                                            is detected.

     53          CARRIER 16800       W1     Carrier signal at 16.8K bps
                                            is detected.

     54          CARRIER 19200       W1     Carrier signal at 19.2K bps
                                            is detected.

     55          CARRIER 21600       W1     Carrier signal at 21.6K bps
                                            is detected.

     56          CARRIER 24000       W1     Carrier signal at 24.0K bps
                                            is detected.

     57          CARRIER 26400       W1     Carrier signal at 26.4K bps
                                            is detected.

     58          CARRIER 28800       W1     Carrier signal at 28.8K bps
                                            is detected.

     59          CONNECT 16800       W0     Connection established at
                                            16.8K bps.

     61          CONNECT 21600       W0     Connection established at
                                            21.6K bps.

     62          CONNECT 24000       W0     Connection established at
                                            24.0K bps.

     63          CONNECT 26400       W0     Connection established at
                                            26.4K bps.

     64          CONNECT 28800       W0     Connection established at
                                            28.8K bps.

     66        COMPRESSION: CLASS    W1     MNP Class 5 data compression
                       5                    was negotiated.

     67           COMPRESSION:       W1     V.42bis data compression was
                    V.42BIS                 negotiated.

     69        COMPRESSION: NONE     W1     No data compression was
                                            negotiated.

     70          PROTOCOL: NONE      W1     No protocol was negotiated.

     77         PROTOCOL: LAP-M      W1     V.42 LAPM error-control was
                                            negotiated.

     80          PROTOCOL: ALT       W1     MNP error-control was
                                            negotiated.

     81             PROTOCOL:        W1     Modem connected in the MNP10
                  ALT-CELLULAR              mode.



