
NEWCOM, INC.

56IFXSP(C)

Card Type                    Modem (asynchronous)
Chipset                      Unidentified
I/O Options                  Audio line out, microphone in, speaker out,
                             voice, speakerphone
Maximum Data Rate            56Kbps
Maximum Fax Rate             14.4Kbps
Data Modulation              Bell 103A, 212A

                             ITU-T V.21, V.22, V.22bis, V.23, V.32,
                             V.32bis, V.34

                             US Robotics x2
Fax Modulation               ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression MNP5, V.42, V.42bis
Fax Class                    Class I
Data Bus                     16-bit ISA
Card Size                    Full height, half length

[Image]

                                CONNECTIONS

          Function             Label            Function            Label

  Telephone line out            CN1     Headphone line out          CN4

  Telephone line in             CN2     Speaker out                 CN5

  Microphone in                 CN3

                                            PLUG-N-PLAY

         Setting                   JP1/A                    JP1/B                   JP1/C

         Enabled                   Closed                  Closed                   Closed

         Disabled                   Open                    Open                     Open

            Note: If Plug-N-Play mode is enabled, all other jumper settings must also be set for
            Plug-N-Play.

                            INTERRUPT SELECTION

   Setting      JP1/D   JP1/E    JP1/F    JP1/G    JP1/H    JP1/I    JP1/J

      3         Open     Open     Open     Open     Open    Open     Closed

      4         Open     Open     Open     Open     Open    Closed   Open

      5         Open     Open     Open     Open    Closed   Open     Open

      7         Open     Open     Open    Closed    Open    Open     Open

      10        Closed   Open     Open     Open     Open    Open     Open

      11        Open    Closed    Open     Open     Open    Open     Open

      12        Open     Open    Closed    Open     Open    Open     Open

  Plug-N-Play   Closed  Closed   Closed   Closed   Closed   Closed   Closed

                       SERIAL PORT ADDRESS SELECTION

    Setting         JP1/K          JP1/L          JP1/M         JP1/N

  3F8h (COM1:)      Closed        Closed          Open           Open

  2F8h (COM2:)      Closed         Open           Open          Closed

  3E8h (COM3:)       Open         Closed         Closed          Open

  2E8h (COM4:)       Open          Open          Closed         Closed

  Plug-N-Play        Open          Open           Open           Open

                        SUPPORTED STANDARD COMMANDS

                             Basic AT Commands

  +++, comma, A/

  A, C, D, E, F, H, L, M, N, O, P, Q, T, V, X, Y, Z

  &C, &D, &F, &G, &J, &K, &P, &S, &T, &V, &W, &Y, &Z

                           Extended AT Commands

  \A, \B, \C, \G, \J, \N, \O, \Q, \T, \U, \X, \Y, \Z

  %A, %C, %E, %G, %L, %Q

                            Special AT Commands

  -C, "H, -J, "O

                                S-Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18,
  S21, S22, S23, S24, S25

  S26, S27, S28, S29, S30, S31, S32, S33, S36, S38, S39, S40, S41, S46,
  S48, S82, S86, S91, S92

  S95

            Note: See MHI help file for complete information.

                              IS-101 COMMANDS

                                +V Commands

  +VBT, +VCID, +VCSD, +VDR, +VEM, +VGM, +VGR, +VGS, +VGT, +VIP, +VIT,
  +VLS, +VNH, +VRA, +VRN

  +VRX, +VSD, +VSM, +VSP, +VTD, +VTS, +VTX, #VSPS

                                -S Commands

  -SAC, -SCD, -SDA, -SDS, -SER, -SFX, -SIC, -SIP, -SQR, -SSP, -SSQ, -SSR,
  -SSV

            Note: The functions of the IS-101 commands are unidentified.

                         Proprietary AT Command Set

          See NEWCOM, INC. 336IFXSP(C) for a full command summary.

