
MOTOROLA, INC.

PREMIER 33.6 EXTERNAL

Card Type                    Modem (asynchronous)
Chip Set                     Unidentified
Maximum Modem Rate           33.6Kbps
Maximum Fax Rate             14.4Kbps
Data Modulation Protocol     Bell 103/212A

                             ITU-T V.34, V.32bis, V.32, V.22bis, V.21
Fax Modulation Protocol      ITU-T V.21 CH2, V.27ter, V.29, V.17
Error Correction/Compression MNP5, V.42, V.42bis
Fax Class                    Class I
Data Bus                     External

[Image]

                                CONNECTIONS

        Function           Label             Function             Label

  Line in                       CN1      DC power                   CN4

  Line out                      CN2      Restore factory            SW1
                                         defaults switch

  RS-232/422 serial port        CN3      Power switch               SW2





































                             DIAGNOSTIC LED(S)

   LED        Color          Status                 Condition

   AA      Unidentified        On              Auto-answer enabled

   AA      Unidentified        Off             Auto-answer disabled

   AA      Unidentified     Blinking          Incoming call detected

   RD      Unidentified        On         Computer is receiving data from
                                                    the modem

   RD      Unidentified        Off        Computer is not receiving data
                                                  from the modem

   SD      Unidentified        On        Computer is transmitting data to
                                                    the modem

   SD      Unidentified        Off         Computer is not transmitting
                                                data to the modem

   CD      Unidentified        On            Carrier signal detected

   CD      Unidentified        Off         Carrier signal not detected

   OH      Unidentified        On               Modem is off-hook

   OH      Unidentified        Off               Modem is on-hook

   HS      Unidentified        On          Modem is operating at 16800,
                                         19200, 21600, 28800, or 33600bps

   HS      Unidentified     Blinking     Modem is operating at 300, 1200,
                                                    or 2400bps

   HS      Unidentified        Off          Modem is operating at 4800,
                                           7200, 9600, 12000, 14400bps

   TR      Unidentified        On               DTR signal is high

   TR      Unidentified        Off              DTR signal is low

   MR      Unidentified        On                  Power is on

   MR      Unidentified        Off                 Power is off

                         SUPPORTED COMMAND SET

                           Basic AT Commands

  AT, +++, A/

  A, E, O, V, X, Y, Z

  &G, &L, &T, &W, &X, &Y, &Z

                          Extended AT Commands

  \A, \G, \X

                              S Registers

  S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S26

  Note: See MHI Help File for full command documentation.



































                         Proprietary AT Command Set

                                   DIAL

  Type:                  Immediate

  Format:                AT [cmds] D<#> [cmds]

  Description:           Dials telephone number according to any
                         modifiers included in the string

  Note:                  Any combination of modifiers can be used to
                         produce the desired dial functions in sequence.

        Command                              Function

          DP             Pulse dialing enabled

          DR             Answer mode enabled; originate mode disabled
                         following handshake initiation.

         DS=n            Dial stored telephone number n

          DT             Tone dialing enabled/Pulse dialing disabled

          DW             Dialing resumed following dial tone detection

          D,             Dialing paused for amount of time specified in
                         S8 register

          D!             Flash function initiated. Modem commanded to go
                         off-hook for specified time before returning
                         on-hook.

          D@             Wait for Quite Answer function enabled. Modem
                         waits until a "quiet answer," a ring-back signal
                         followed by silence up to the time specified in
                         S7, is received prior to executing the rest of
                         the dial string.

          D;             Modem returned to idle state after dialing. The
                         semicolon can only be placed at the end of the
                         dial command.

                               HOOK CONTROL

  Type:          Immediate

  Format:        AT [cmds] Hn [cmds]

  Description:   Selects whether the modem is on-hook or off-hook

    Command                              Function

       H0        Modem commanded to go on-hook (hang-up)

       H1        Modem commanded to go off-hook (pick-up)

       H2        Set H command to allow cleardown

       H3        Set H command to disallow cleardown

                            REPORT INFORMATION

  Type:          Immediate

  Format:        AT [cmds] In [cmds]

  Description:   Displays information requested

    Command                              Function

       I0        Reports product code

       I1        Reports EPROM CRC value

       I3        Reports product version

       I4        Reports capability code

       I5        Reports disconnect reason





                              SPEAKER VOLUME

  Type:          Configuration

  Format:        AT [cmds] Ln [cmds]

  Description:   Controls speaker volume

    Command                              Function

       L0        Low volume setting

       L1        Low volume setting

       L2        Medium volume setting

       L3        Highest volume setting

                               SPEAKER MODE

  Type:                Configuration

  Format:              AT [cmds] Mn [cmds]

  Description:         Selects various speaker options

       Command                             Function

         M0            Speaker disabled

         M1            Speaker enabled until carrier signal detected

         M3            Speaker enabled following dialing, then disabled
                       after carrier signal detected.

                               RESULT CODES

  Type:          Configuration

  Format:        AT [cmds] Qn [cmds]

  Description:   Enables modem to send result codes to the DTE

    Command                              Function

       Q0        Result code sending enabled

       Q1        Result code sending disabled

       Q2        Result code sending in originate mode only

                         DATA CARRIER DETECT (DCD)

  Type:          Configuration

  Format:        AT [cmds] &Cn [cmds]

  Description:   Selects whether the DCD option is enabled or disabled

    Command                              Function

      &C0        DCD enabled

      &C1        DCD enabled after carrier signal detected

      &C2        DCD off 5 seconds after disconnect

      &C3        DCD follows remote RTS





















                         DATA TERMINAL READY (DTR)

  Type:                 Configuration

  Format:               AT [cmds] &Dn [cmds]

  Description:          Selects modem response to DTR

            Note: The action each variant of &D causes depends on the
            setting of &Q

        Command                             Function

          &D0           Modem does not respond to DTR

          &D1           Modem goes to command mode after DTR goes is off

          &D2           Modem goes to command mode and disconnects (hangs
                        up) after DTR goes off; Auto-Answer is disabled.

          &D3           Modem is initialized after DTR goes off

          &D9           DTR dials/disconnects

                          FACTORY DEFAULT PROFILE

  Type:             Configuration

  Format:           AT [cmds] &F [cmds]

  Description:      Sets values in active profile to values found in the
                    default profile

     Command                              Function

       &F0          Restore factory default 0

       &F1          Restore factory default 1

                            COMMUNICATIONS MODE

  Type:             Configuration

  Format:           AT [cmds] &Mn [cmds]

  Description:      Selects communications mode

     Command                                Mode

       &M0          Asynchronous dial/asynchronous data

       &M1          Asynchronous dial/synchronous data

       &M2          Dial stored number when DTR off/on transition is
                    detected/sync data

       &M3          Manual dial/sync data

       &M4          V.25bis dialer/BISYNC protocol/sync data (EBCDIC)

       &M5          V.25bis dialer/SDLC protocol/sync data (NRZ)

       &M6          V.25bis async dial/sync data

       &M7          V.25bis async dial/async data

       &M8          V.25bis dialer w/BISYNC protocol/sync data (EBCDIC)

       &M9          V.25bis dialer w/SDLC protocol/sync data (EBCDIC)
                    (NRZ)

       &M10         V.25bis dialer w/SDLC protocol/sync data (ASCII)
                    (NRZI)

       &M11         V.25bis dialer w/SDLC protocol/sync data (EBCID)
                    (NRZI)

                            PULSE DIALING RATIO

  Type:          Configuration

  Format:        AT [cmds] &Pn [cmds]

  Description:   Selects pulse dial make/break ratio

    Command                              Function

      &P0        39/61ms at 10pps (North America)

      &P1        33/67ms at 10pps (Europe)

                                  RTS/CTS

  Type:           Configuration

  Format:         AT [cmds] &Rn [cmds]

  Description:    Selects RTS/CTS options

    Command                              Function

      &R0         CTS follows RTS in data mode; RTS is ignored in command
                  mode.

      &R1         CTS forced high, RTS is ignored.

      &R2         CTS follows DCD

      &R9         CTS equals RTS

                           DATA SET READY (DSR)

  Type:          Configuration

  Format:        AT [cmds] &Sn [cmds]

  Description:   Selects DSR options

    Command                              Function

      &S0        DSR forced high

      &S1        DSR high when ready to accept data

      &S2        DSR off for 5 seconds after disconnect

      &S3        DSR follows off hook

                          CONFIGURATION PROFILES

  Type:          Immediate

  Format:        AT [cmds] &V [cmds]

  Description:   Displays active and stored configuration profiles

    Command                              Function

      &V0        View configuration profiles

      &V1        Displays received signal status

      &V2        Displays active profile

                            Extended AT Commands

                                BREAK SEND

  Type:          Configuration

  Format:        AT [cmds] \Bn [cmds]

  Default:       35

  Range:         1-255

  Unit:          20ms

  Description:   Sends break to modem

    Command                              Function

      \B0        Transmit break signal

      \B1        Set break length in 20ms increments

                  AUTO-RELIABLE TIME BUFFER CONFIGURATION

  Type:              Configuration

  Format:            AT [cmds] \Cn [cmds]

  Description:       Controls the handling of incoming data during
                     auto-reliable time period

      Command                             Function

        \C0          Data is discarded

        \C1          Data is buffered

                             LOCK SERIAL PORT

  Type:          Configuration

  Format:        AT [cmds] \Jn [cmds]

  Description:   Sets operation of serial port speed

    Command                              Function

      \J0        Serial speed locked

      \J1        Serial speed follows connect speed

      \J2        Enable 230.4Kbps serial speed

      \J3        Disable 230.4Kbps serial speed

                                BREAK TYPE

  Type:          Configuration

  Format:        AT [cmds] \Kn [cmds]

  Description:   Configures action of break signal

    Command                              Function

      \K1        Break signals empty data buffers

      \K3        Expedite break signals

      \K5        Sequence break signals with data

                             V.42 FAST DETECT

  Type:          Configuration

  Format:        AT [cmds] \Mn [cmds]

  Description:   Controls the V.42 fast detect data sequence

    Command                              Function

      \M0        V.42 fast detect data sequence disabled

      \M1        V.42 fast detect data sequence enabled

                               CONNECT MODE

  Type:          Configuration

  Format:        AT [cmds] \Nn [cmds]

  Description:   Controls the type of connection the modem will operate
                 in

    Command                              Function

      \N0        Normal mode enabled

      \N1        Direct mode enabled

      \N2        MNP mode

      \N3        MNP with normal fallback

      \N4        LAPM only

      \N5        LAPM with normal fallback

      \N6        LAPM with MNP fallback

      \N7        LAPM with MNP and normal fallback

                             FLOW CONTROL TYPE

  Type:          Configuration

  Format:        AT [cmds] \Qn [cmds]

  Description:   Sets type of flow control used by modem

    Command                              Function

      \Q0        Flow control disabled

      \Q1        Bidirectional XON/XOFF flow control enabled

      \Q2        CTS flow control by DCE enabled

      \Q3        Bidirectional RTS/CTS flow control enabled

                               RING INDICATE

  Type:          Configuration

  Format:        AT [cmds] \Rn [cmds]

  Description:   Controls the ring indicator

    Command                              Function

      \R0        LED AA blinks for ring and remains on during the call

      \R1        LED AA blinks for ring and turns off when call is
                 answered

                             INACTIVITY TIMER

  Type:                  Configuration

  Format:                AT [cmds] \Tn [cmds]

  Range:                 1-255

  Unit:                  1 second

  Description:           Sets the length of time that the modem does not
                         receive information before it disconnects.

                           EXTENDED RESULT CODES

  Type:          Configuration

  Format:        AT [cmds] \Vn [cmds]

  Description:   Selects extended result codes

    Command                              Function

      \V0        Connect message shows computer speed

      \V1        Connect message shows computer speed/protocol

      \V2        Connect message shows modem speed

      \V3        Connect message shows speed/protocol

      \V4        Connect message shows modem speed/modulation/protocol























                              SPEED SELECTION

  Type:          Configuration

  Format:        AT [cmds] %Bn [cmds]

  Description:   Selects the maximum connect speed

    Command                              Function

      %B0        Use computer speed

      %B1        300bps

      %B2        1200bps

      %B3        2400bps

      %B4        4800bps

      %B5        9600bps uncoded

      %B6        9600bps

      %B7        7200bps

      %B8        12000bps

      %B9        14400bps

      %B10       600bps

     MOTOROLAPREMIER 33.6 EXTERNAL. . . continued from previous pagePRODUCT
                           REVISION__Type:_Immediate__Format:_AT [cmds] %Vn
            [cmds]__Description:_Display product revision level__Special AT
      CommandsV.34 ASYMMETRIC RATE__Type:_Immediate__Format:_AT [cmds] *ASn
     [cmds]__Description:_Sets the asymmetric bit rate__ Command_Function__
    *AS0_Disable V.34 asymmetric bit rate__ *AS1_Enable V.34 asymmetric bit
       rate__BILTERAL DIGITAL LOOP__Type:_Immediate__Format:_AT [cmds] *DGn
                 [cmds]__Description:_Controls the bilateral digital loop__
 Command_Function__ *DG0_Disables the bilateral digital loop__ *DG1_Enables
   the digital bilateral loop__TEST MODE - PTT__Type:_Immediate__Format:_AT
  [cmds] *DNn [cmds]__Description:_Send PTT test signals for a line tests__
   Command_Function__ *DN0_Allow redial with A/__ *DN1_Disallow redial with
    A/__DISTINCTIVE RING DETECTION__Type:_Immediate__Format:_AT [cmds] *DRn
             [cmds]__Description:_Controls the distinctive ring detection__
   Command_Function__ *DR0_Disable distinctive ring detection__ *DR1_Enable
 distinctive ring detection__FAST TRAIN__Type:_Immediate__Format:_AT [cmds]
     *FTn [cmds]__Description:_Controls the fast train__ Command_Function__
   *FT0_Disables the fast train__ *FT1_Enables the fast train__Continued on
                                                            next page . . .

      MOTOROLAPREMIER 33.6 EXTERNAL. . . continued from previous pageONLINE
   HELP__Type:_Immediate__Format:_AT [cmds] $Hn [cmds]__Description:_Online
            help__ Command_Function__ $H=string_Online help__PRODUCT SERIAL
                             NUMBER__Type:_Immediate__Format:_AT [cmds] $Vn
          [cmds]__Description:_Displays the product serial number__Security
     CommandsUSER CALLBACK NUMBER__Type:_Immediate__Format:_AT [cmds] $Cn=m
  [cmds]__Description:_Sets the user callback number (n= user number and m=
 the callback number__SECURITY DISABLED__Type:_Immediate__Format:_AT [cmds]
                        $D [cmds]__Description:_Disables security__SECURITY
STATUS__Type:_Immediate__Format:_AT [cmds] $D? [cmds]__Description:_Reports
   the security status__SECURITY ENABLE__Type:_Immediate__Format:_AT [cmds]
                 $EH=pw [cmds]__Description:_Enables security (pw=superuser
       password)__REINITIALIZE SECURITY__Type:_Immediate__Format:_AT [cmds]
         $F=pw$pw [cmds]__Description:_Reinitializes security (pw=superuser
         password)__USER INFORMATION__Type:_Immediate__Format:_AT [cmds] $I
[cmds]__Description:_Reports all secure user information__Continued on next
                                                                 page . . .

      MOTOROLAPREMIER 33.6 EXTERNAL. . . continued from previous pageFORMAT
SETTINGS__Type:_Immediate__Format:_AT [cmds] *RFn [cmds]__Description:_Sets
  the remote configuration format settings__ Command_Function__ *RF0_7 data
  bits, mark parity, 1 stop bit__ *RF1_7 data bits, no parity, 2 stop bit__
*RF2_7 data bits, odd parity, 1 stop bit__ *RF3_7 data bits, even parity, 1
stop bit__ *RF4_8 data bits, mark parity, 1 stop bit__ *RF5_8 data bits, no
parity, 1 stop bit__ *RF6_8 data bits, odd parity, 1 stop bit__ *RF7_8 data
                                 bits, even parity, 1 stop bit__SAVE REMOTE
                     CONFIGURATION__Type:_Immediate__Format:_AT [cmds] *RQn
   [cmds]__Description:_Exit remote configuration and saves or discards the
       new configuration__ Command_Function__ *RQ0_Save new configuration__
          *RQ1_Discard new configuration__S(status) -REGISTERSREMOTE ESCAPE
                                          CHARACTER__Format_AT [cmds] S41=n
[cmds]__Default:_61__Range:_1-255__Unit:_20ms__Description:_Sets the remote
                escape character__REMOTE GUARD TIME__Format_AT [cmds] S42=n
      [cmds]__Default:_50__Range:_0-255__Unit:_ASCII__Description:_Sets the
remote guard time__COMPUTER CONTROL CHARACTER - XON__Format_AT [cmds] S44=n
      [cmds]__Default:_17__Range:_0-127__Unit:_ASCII__Description:_Sets the
 character used to represent XON for the computer__Continued on next page .
                                                                        . .

    MOTOROLAPREMIER 33.6 EXTERNAL. . . continued from previous pageCOMPUTER
                           CONTROL CHARACTER - XOFF__Format_AT [cmds] S45=n
      [cmds]__Default:_19__Range:_0-127__Unit:_ASCII__Description:_Sets the
 character used to represent XOFF for the computer__MODEM CONTROL CHARACTER
                                             - XON __Format_AT [cmds] S49=n
 [cmds]__Default:_17__Range:_0-127__Description:_Sets the character used to
    represent XON for the modem__MODEM CONTROL CHARACTER - XOFF __Format_AT
                                                               [cmds] S50=n
      [cmds]__Default:_19__Range:_0-127__Unit:_ASCII__Description:_Sets the
           character used to represent XOFF for the modem__PASSWORD TIMEOUT
                                           SECURITY__Format_AT [cmds] S73=n
   [cmds]__Default:_0__Range:_0-255__Description:_Sets the password timeout
                           security__CALLBACK DELAY__Format_AT [cmds] S74=n
          [cmds]__Default:_15__Range:_0-255__Description:_Sets the callback
                              delay__CALLBACK RETRY__Format_AT [cmds] S75=n
           [cmds]__Default:_0__Range:_0-255__Description:_Sets the callback
                         retry__CALLBACK RETRY DELAY__Format_AT [cmds] 76=n
    [cmds]__Default:_15__Range:_1-255__Description:_Sets the callback retry
                           delay__LOCKOUT THRESHOLD__Format_AT [cmds] S77=n
[cmds]__Default:_0__Range:_0-255__Description:_Sets the lockout threshold__

