
DIGICOM SPA

TINTORETTO PCMCIA

Card Type                    ISDN TA
Chip Set                     Unidentified
ISDN Rate                    128Kbps
ISDN Modulation Protocol     V.110, V.120
Error Correction/Compression V.42bis
Data Bus                     PCMCIA

                                                                      55061

                      USER CONFIGURABLE SETTINGS

                    Setting                      Label     Position

  Transmission channel in high impedence mode     J2         Open

  Transmit termination set to 100Ohm              J2        Closed

  Receive channel in high impedence mode          J3         Open

  Receive termination set to 100Ohm               J3        Closed

  Note: Jumpers located inside external line interface

                   SUPPORTED COMMAND SET

                     Basic AT Commands

  AT, A/

  A, E, Q, V, W

  &C, &R, &Z

                        S Registers

  S3, S4, S12, S25, S26



  Note: See MHI Help File for full command documentation.

                         PROPRIETARY AT COMMAND SET

      For a full command summary, see DIGICOM SPA TINTORETTO INTERNAL

