
VISIONETICS INTERNATIONAL

VIGA GENLOCK+

Category                   Video
Video Types Supported      XVGA
Video Processor            Tseng Labs ET4000 (Exact location is
                           unidentified)
Highest Resolution         1024 x 768
Supported
Data Bus Type              16-bit ISA
Memory Type                VRAM
Maximum Onboard Memory     1MB (Exact location of memory is unidentified)

[Image]

                                CONNECTIONS

        Purpose           Location           Purpose           Location

  RCA connector              P1        15-pin analog video        P4
                                       port

  9-pin analog video         P2        VGA feature                P5
  port                                 connector

  Minin-Din connector        P3

     P2 (PIN 9) ASSIGNMENT SELECTION

       Setting                J1

       C input        Pins 1 & 2 closed

      R - Y in        Pins 2 & 3 closed

     P2 (PIN 7) ASSIGNMENT SELECTION

       Setting                J2

     Overlay out      Pins 1 & 2 closed

      B - Y in        Pins 2 & 3 closed

          INPUT SIGNAL SELECTION

       Setting                J3

      Y/C input       Pins 1 & 2 closed

   Composite input    Pins 2 & 3 closed

  INTERRUPT SELECTION

    IRQ2         J4

  Enabled      Closed

  Disabled      Open

                            VGA POWER SELECTION

                 Setting                               SW1/5

                   Enabled                             Off

                   Disabled                              On

                        I/O BASE ADDRESS SELECTION

     Address          SW1/1         SW1/2         SW1/3          SW1/4

        300h          Off            On            On            On

         200h           On            On            On            On

         220h           On            On            On            Off

         240h           On            On           Off            On

         260h           On            On           Off            Off

         280h           On           Off            On            On

         3C0h          Off           Off           Off            On

         3E0h          Off           Off           Off            Off

                              BIOS SELECTION

                 Setting                               SW1/6

                   Enabled                              On

                   Disabled                             Off

                        BIOS BASE ADDRESS SELECTION

          Address                    SW1/7                  SW1/8

             C800h                   Off                    Off

              D000h                   Off                     On

              D800h                    On                    Off

              E000h                    On                     On

        TEXT MODE KEY DELAY ADJUSTMENT

        Setting                 VR4

       Increase              Clockwise

       Decrease         Counter - clockwise

  GRAPHICS MODE &GT;800 X 600 KEY DELAY ADJUSTMENT

         Setting                      VR5

         Increase                  Clockwise

         Decrease             Counter - clockwise

  GRAPHICS MODE  800 X 600 KEY DELAY ADJUSTMENT

         Setting                    VR6

        Increase                 Clockwise

        Decrease            Counter - clockwise

