
I2M (INTERNATIONAL INTERACTIVE MEDIA)

MEDIAPLAYBACK FOR PC, MEDIAPREVIEW FOR PC

Card Type                   MPEG video capture and sound card
Video Chip Set              NMG662543
Capture Video Supported     NTSC & PAL
Highest Resolution          Unidentified
Supported
Maximum Video Memory        16KB
Data Bus                    16-bit ISA
Video Types Supported       VGA

[Image]

                                CONNECTIONS

          Function             Label           Function           Label

  Unidentified                  J1      8-pin mini-Din              P5
                                        connector (CD-i)

  VGA feature connector         P2      Audio out                   P7

  26-pin proprietary VGA        P3      4-pin CD-DA audio in        P9
  connector, in/out

  6-pin mini-DIN connector      P4
  (RGB monitor)

                        USER CONFIGURABLE SETTINGS

                 Function                    Label         Position

     Factory configured - do not alter      SW2/1       Unidentified

                 OVERLAY VIDEO I/O ADDRESS CONFIGURATION

    Address        SW1/1          SW1/2          SW1/3          SW/4

  2D0h - 2D3h       Off            Off            Off            Off

  Note: Additional settings for SW1 are not supported.

                       MEMORY BASE ADDRESS SELECTION

        Address              SW2/2            SW2/3            SW2/4

      C0000h - C3FF0h          On               On               On

      C4000h - C7FF0h          On               On              Off

      C8000h - CBFF0h          On              Off               On

     CC000h - CFFF0h          On              Off              Off

      D0000h - D3FF0h         Off               On               On

      D4000h - D7FF0h         Off               On              Off

      D8000h - DBFF0h         Off              Off               On

      DC000h - DFFF0h         Off              Off              Off

                       MISCELLANEOUS TECHNICAL NOTE

  Note 1: HDR2 is a 6-pin jumper that controls the Overlay position
  setting, depending on your VGA adapter card you may have to move this
  jumper to the left or right to adjust your overlay picture.

  Note 2: HDR1 is a 1-pin jumper for ground selection. The manufacture
  recommends that you do not alter this in any way.

