This file offers help for installation of the ME34T2/ME14T2 Combo Card on a
Banyan workstation.

There are 3 steps involved - detailed as follows.

1. Run the PCCONFIG program (supplied by Banyan) and configure Banyan for
   the ethernet card running on IRQ 15.

2. Modify CONFIG.SYS so that the following drivers are placed at the
   bottom of the file and loading in the specified order.

                Note: Some paramaters may be different.


Device=C:\APEXEM\Apexem.sys /c=c:\APEXEM\Apexem.cfg /f=c:\BAN\protocol.ini
Device=C:\BAN\protman.dos /i:c:\BAN
Device=C:\APEXEM\emndis20.dos

3. The following lines need to be inserted into the Protocol.ini file.

                Note: You can use an editor to cut and paste
                this information to your protocol.ini file.


[EMNDISNET]
DRIVERNAME = EMNDIS20$
SWINT = 0X62
MEMORYADD = 0XD0000
DRIVERMODE = DUALINT

[VINES_XIF]
DRIVERNAME = NDISBAN$
BINDINGS = EMNDISNET
