







                           THE ZIP TERMINUS(c) V6.2C

                         Copyright 1992  By S.T.CALISE

                              All Rights Reserved!






                               TABLE OF CONTENTS


                                                                  page

         Disclaimer                    ...........................  2
         Hardware/Software Required    ...........................  3
         Brief Program Overview        ...........................  3
         Installation                  ...........................  3
         Configure                     ...........................  5
         File Management               ...........................  6
         Mouse Operation               ...........................  7
         Directory Views               ...........................  7
         ZIPUP Operations              ...........................  7
         UNZIP Operations              ...........................  8
         Included PATH Info Found!     ...........................  8
         OVERFLOW Warning              ...........................  8
         Make Self-Extracting ZIPS     ...........................  8
         ZIP File Comments             ...........................  8
         Test/Check ZIPFILE(S)         ...........................  8
         ZIP Password Protection       ...........................  9
         Memory Available Function     ........................... 10
         Insufficient Memory           ........................... 10
         Auto-Check Virus Scan         ........................... 11
         VIRUS Scan Submenu            ........................... 11
         Virus Found! - Continue/Halt? ........................... 11
         Automated Path Select         ........................... 12
         Screen saver function         ........................... 13
         DOS BATCH FILE(s)             ........................... 13
         Bulletin Board Posting        ........................... 13
         Virus Detection Addendum      ........................... 13
         Terminus start-up options     ........................... 14
         Update/Change Information     ........................... 14
         Acknowledgements              ........................... 15
         Upgrades                      ........................... 15
         Registration Information      ........................... 15




                                    - PAGE 2 -


         Programs included in THE ZIP TERMINUS(c) Package: ZT62C.EXE ;
         PRINTDOC.BAT ; ZT62CDOC.TXT ; STC.ICO (4 files ONLY!)

    You have a contiguous five(5) day period to evaluate THE ZIP TERMINUS
    starting from the date you first receive it. Your PAID registration/
    license is required for any use beyond this period.

         The author and holder of copyright hereby disclaim all
    warranties relating to this software, whether express or implied,
    including and without limitation to any implied warranties of
    merchantability or fitness for a particular purpose.  The USER of
    this software shall bear all risk as to the quality and performance
    of the software. In no event shall S.T.Calise be liable to you for any
    consequential, special, incidental or indirect damages of any kind
    arising out of the performance or use of the software, even if
    S.T.Calise has been advised of the possibility of such damages.

               THE ZIP TERMINUS(c) IS DISTRIBUTED 'AS IS' .


    **** REFER TO PAGE #15 FOR REGISTRATION FORM - PERSONAL USE ONLY! ****




                                   - PAGE 3 -


                             HARDWARE RECOMMENDATIONS

                           640K BYTES MEMORY (512K MIN)
                         HARD DRIVE - OR ANY COMBINATION
                         OF HARD DRIVE AND/OR FLOPPY(S)*
                  (IBM MDA) OR (CGA C80) TEXT MODE/EMULATION REQ.
                          MS COMPATIBLE MOUSE OPTIONAL


                             SOFTWARE REQUIREMENTS:

                              PC/MS DOS V2.11 - 5.0
                         PKZIP(tm) v1.X by PKWARE, INC.
                VIRUSCAN(tm) 8.9B97 or higher by McAfee Associates

    ****  The ZIP TERMINUS was designed to be run on a stand alone PC. ****

         BACKGROUND INFORMATION:

              This program was designed to be an intelligent front end
         for PKWARE's PKZIP(tm) V1.1X  compression/archive utility.
         One of the main objectives in writing this program was to reduce
         the amount of user input required each time a file is ZIPPED
         or UNZIPPED. The ZIP TERMINUS specializes in 'FLAT ARCHIVES'.
         This program in no way attempts to facilitate EVERY archive
         convention offered by PKZIP(tm). Instead, it offers a modest
         selection of power options that will be of help to the beginner
         or intermediate user in their daily telecommunication and archive
         activities.

                          *********************

      IT IS STRONGLY SUGGESTED THAT YOU SEEK EXPERIENCED HELP IN DEALING
                     WITH COMPUTER VIRUS INFECTIONS!

                          *********************

         ***** INSTALL THE ZIP TERMINUS(c):

              THE ZIP TERMINUS(c) operates most efficiently when
         used in conjunction with a hard drive. You may also use
         this program with 2 floppy drives or any combination of
         hard and floppy drives. The minimum for operation is
         (TWO FLOPPY DRIVES) or (ONE HARD DRIVE)

              PKZIP(tm) files needed are  : PKZIP.EXE; UNZIP.EXE;
                                            ZIP2EXE.EXE;

              McAfee VIRUSCAN files needed: SCAN.EXE version 8.9B97

              ZIP TERMINUS files needed   : ZT62C.EXE;

              MS/PC DOS files required    : COMMAND.COM




                                   - PAGE 4 -


              HARD DRIVE:  1. Create one subdirectory for PKZIP(tm) and
                              THE ZIP TERMINUS.

                           2. Copy PKZIP(tm), ZIP TERMINUS and SCAN.EXE
                              files to the subdirectory.

                           3. Type the following lines pressing <ENTER>
                              after each:

                                        c:
                                        cd\terminus
                                        zt62C.exe

                           4. Press F5 to configure when you arrive at the
                              main menu. c: may be d: or any logical drive
                              where you have placed the TERMINUS files.
                              cd\terminus may be cd\utility or any subdirectory
                              on the drive where you have placed the TERMINUS
                              files.

              ------------------------------------------------------------

               FLOPPY  :   1. Format a blank data disk.

                           2. Copy PKZIP(tm), ZIP TERMINUS and SCAN.EXE
                              files to the disk. Put them in the ROOT DIR -
                              not a subdirectory.

      <IMPORTANT> --->     3. You must copy COMMAND.COM to the disk.

                           4. Place your disk in Drive #A. Type the
                              following lines and press <ENTER> after each:

                                        a:
                                        cd\
                                        zt62C.exe

                            5. Press F5 to configure when you arrive at the
                               main menu.

         NOTE: When using only floppy disks, operations may be limited by the
               lack of free disk space. A hard drive is recommended. Also,
               all files including COMMAND.COM should not be installed in a
               subdirectory on your floppy.(put them in the root)

         NOTE: You MUST start zt62C.exe from the directory where it is
               located at. You must switch the active subdirectory
               and drive to the TERMINUS files location before running
               zt62C.exe so that your previously saved CFG file can be
               loaded in. TERMINUS assumes that the CFG file is in the
               startup directory and drive.




                                   - PAGE 5 -


         ***** CONFIGURE THE ZIP TERMINUS:

              THE ZIP TERMINUS(c) may be configured from the main
         program menu or any sub-menu while the program is running. It
         is highly recommended that you configure your paths and
         parameters when running the program for the first time. You
         may use separate directories for the zipup and unzip process.
         Designate different target directories if so desired.  Take
         your time and plan where you want the file action to occur
         for each of the functions. Make sure that you save the
         default parameters when you are done. Here is an explanation
         of the program parameters:


              THE TERMINUS PRGMS DIR: Location of the ZIP TERMINUS files.

              PKZIP(tm) PROGRAM  DIR: Drive and directory where
                                      PKZIP(tm) is located at.

              McAFEE  SCAN.EXE   DIR: Location of SCAN.EXE

              ZIPUP FILE SOURCE  DIR: The directory path that will
                                      hold all files that will be
                                      ZIPPED up.

              ZIPUP FILE TARGET  DIR: Directory path where the ZIP
                                      file will be created.  This can
                                      be the same as the source path.

              UNZIP FILE SOURCE  DIR: This directory will contain the
                                      ZIP file(s) that get unzipped.

              UNZIP FILE TARGET  DIR: Directory where all the files
                                      that are extracted from the master
                                      ZIP will end up.  This can be
                                      the same as the UNZIP FILE
                                      SOURCE path.

              DOS SHELL  PATH & FILE: This parameter will describe
                                      where the DOS Shell will be
                                      located and the name of the
                                      shell program. You may
                                      even use the file COMMAND.COM if
                                      no shell is available. When you
                                      press <F3> the program control
                                      will go to the file you specify.




                                   - PAGE 6 -


              ZIPUP ARCHIVE  OPTIONS: THE ZIP TERMINUS comes with
                                      -a as the default.  This will
                                      allow you to create and add to
                                      ZIP archives. You may change this
                                      parameter to suit your needs.
                                      Consult your PKZIP(tm) manual
                                      for more information on ZIPUP
                                      options.

              UNZIP ARCHIVE  OPTIONS: THE ZIP TERMINUS comes with -e
                                      as the default.  This will allow
                                      all selected files within the
                                      source ZIP file to be extracted.

              VIEW  ARCHIVE  OPTIONS: The default is -v which will
                                      display all files inside the
                                      master ZIP. Read PKZIP docs
                                      for more information.

              SCAN.EXE PRGM. OPTIONS: Parameter options used with SCAN
                                      for the VIRUS SCAN submenu.

              ZIP/UNZIP --- PASSWORD: Place your choice of password
                                      for ZIP scramble / unscramble
                                      operation. No spaces or '-'
                                      characters allowed.


         ***** FILE MANAGEMENT

              You may jump in and out of THE ZIP TERMINUS, each
         time copying, moving, deleting, etc. the files you choose.
         Just press F3 at any menu. THE ZIP TERMINUS will suspend
         operation while you are in your shell/utility. You can get
         back to THE ZIP TERMINUS by using the EXIT/QUIT function
         of your utility or by typing 'EXIT' at the DOS command prompt.
         DO NOT attempt to go back to THE ZIP TERMINUS by re-launching
         ZT62C.EXE instead of using your SHELL's  'EXIT' function.

         Some DOS shell programs may not work because of limited available
         contiguous RAM. Read page #10 on how to determine available RAM.
         Consult the user manual for your shell to determine what the
         memory requirements are.




                                   - PAGE 7 -


         ***** MOUSE OPERATION:

              The two button Microsoft Mouse hardware specifications
         are supported by this program when used in conjunction with a
         color display/card that supports the IBM CGA C80 standard.
         The program's video mode auto-detect logic disables mouse
         operation if a Monochrome Display Adapter is detected. Only
         keyboard entry is functional in MONOCHROME video mode(IBM MDA
         standard).  Logitech and all other Microsoft Mouse compatible
         mice should function properly.  The program logic checks for
         a 'connected' mouse.  You should not experience any trouble
         if your mouse is truly MS compatible, connected to the
         serial port or buss card, and the mouse driver software was
         installed prior to running this program.

         ***** DIRECTORY VIEWS:

              You may view the contents of the ZIPUP SOURCE, ZIPUP
         TARGET, UNZIP SOURCE and the UNZIP TARGET directories by
         clicking the mouse button when the cursor is over the prompt
         ALT-D  on the top function bar in the right hand corner.
         You may also press the ALT-D key combo to get the same results.

         ***** ZIPUP OPERATION:

              This version doesn't default the file list for ZIPUP
         operations as '*.*'.  You MUST select a single file or a
         group of files for a ZIP operation.  The directory for ZIPUP
         SOURCE files is the directory displayed when you are
         selecting a single file. If you don't tag any files or forget
         to specify a ZIP file name, an audible cue will sound. Be
         careful......read the PKZIP(tm) DOCS.  Plan your directory
         PATHS and ZIP PARAMETERS cautiously!

         Lists of files can be zipped in the following manner.
         Click or press enter when the file(s) you desire to add to
         the ZIP file are highlighted.  Press <ESC> when you are
         through. Press #2 and enter a name for the ZIP file you are
         about to create.  Select #3 and the list of files will be
         'ZIPPED UP'. There is a 512 file limitation. Use *.* for
         larger file counts. PRESS <*> asterisk.

         Menu option #4 allows you to delete any file within a ZIP
         file. You may choose any ZIP file from SOURCE/TARGET dirs.
         The files within the ZIP are then displayed. Choose one or
         several files to delete and then proceed.




                                   - PAGE 8 -


         ***** UNZIP OPERATION:

              The main thing to remember here is that only the UNZIP
         SOURCE directory is displayed for UNZIP file selection. You
         may choose from those files with a '.ZIP' extension.  If you
         need to perform any file operations you should jump to your
         SHELL and then EXIT when finished. The resulting file will be
         placed in the UNZIP source directory.

        ***** NOTE: ALL files within a ZIP archive file should be extracted
                    first and then virus scanned. Virus infections may go
                    undetected if you only scan the archive file itself.


        ***** INCLUDED PATH INFORMATION:

              Archives that have included path information should be
        extracted by selecting *.* (press asterisk '*') The ZIP TERMINUS
        specializes in 'FLAT ARCHIVES' and does not support re-creation
        of original paths.


        ***** OVERFLOW Warning:

              ZT62C has a 512 file limit on ZIP file list functions.
         To ZIPUP or UNZIP more than 512 files press <SHIFT #8> for
         *.* mode operation.

         ***** MAKE '*.EXE' OPERATION: (PKSFX)

              This function will process '*.ZIP' files found in the
         ZIPUPUNZIP directories.  All '*.EXE' files will be left in
         the selected directory. Use ALT-P to temporarily change the
         ZIPUP or UNZIP directory location if the current value is not
         acceptable. Use your SHELL if you need to jockey files around
         to this or any other directory.  The resulting '*.EXE' file
         will be self-extracting. Please read your PKZIP(tm) DOCS for
         further information.

         ***** ZIP FILE COMMENTS: (-z)

              There is only one type of comment operation offered in this
         version of the ZIP TERMINUS. It is available in the ZIPUP, UNZIP
         and MAKE SFX submenus. Press ALT-C and first select a directory
         and then a file to place a comment on.

         ***** TEST ZIPFILE(S):

              This option is available by pressing <F8> on the menu
         bar. It will verify a zip file for checksum, etc. Use this
         option if you have any doubts about a ZIP file after modem
         transfer, a hard disk crash, etc.  Version 6.2C will check
         a single file, list of files, or all files in the Directory.




                                   - PAGE 9-


         ***** PASSWORD PROTECTION:

              Press <F9> to toggle password on or off. The password
         protect mode garbles each individual file in the master ZIP
         during the ZIPUP process.  This is the only time that an
         individual file or group of files can be password protected.
         The master zip file, the file containing the individual files
         you ZIPPED up, does not get the password protection.  Only
         the individual files within are protected.  It is therefore
         possible to construct a master ZIP that has some of it's
         files password protected and others which are not.  This can
         be accomplished by adding one or several files at a time to
         the master ZIP and toggling PASSWORD on or off as needed.
         You can even have different passwords for different groups of
         files within a master ZIP file.  The use of password garble
         protection has many uses in corporate inter-office E-Mail,
         etc.

              The password can be changed by pressing <F5> and
         changing the password default parameter. Don't forget to save
         your changes when you are finished so that each time you run
         THE ZIP TERMINUS your first choice password will be loaded.

              Unzipping a master zip file that has some or all of it's
         individual files password protected is easily accomplished.
         Toggle password on by pressing <F9> , make sure you have the
         right password(press <F5> to change it), and unzip as you
         would normally do. Make repeated passes if more than one
         password was used for different groups of file(s).

              IF you convert a password protected ZIP to an EXE file
         you must use the correct password or the file will not self-
         extract. Assume the file you created was TEST.ZIP and you
         converted it to TEST.EXE.  The password used was
         'TERMINUS'.  Typing the following from the DOS command line
         will do the trick:

                            A> test.exe -sTERMINUS


              Do not use the character '-' or include any spaces in
         your password.  PKZIP(tm) password protection is case
         sensitive so be aware that upper and lower case characters,
         i.e. 'Y' or 'y', are considered as being different.

              CAUTION!: Remember your password when zipping up. It is
         not feasible to unzip files in a ZIP file that are password
         protected if you don't have the right password!




                                   - PAGE 10 -


         ***** MEMORY AVAILABLE FUNCTION:

              Memory available for SHELL launch or PKZIP(tm) operations
         can be found by pressing CTRL-F key combination while in ANY
         MENU or CHANGE DEFAULTS. Free memory for SHELL launch is also
         displayed each time you press F3 to go to your favorite shell.
         This is RAM memory not FREE DISK SPACE! The number of FREE Kb
         displayed is the size of the largest CONTIGUOUS block available.

             The RAM FREE figure displayed is only a guide to help users
        determine if their shell or other utility will have enough space
        to operate. It does not necessarily refer to the total conventional
        memory(i.e. 640Kb, 512Kb, etc.) minus the sum of memory all programs
        you are running actually occupy. The number of KB FREE refers to the
        largest contiguous or adjacent set of RAM locations available and
        therefore in a general sense also refers to the size of the largest
        executable program that may be launched from the ZIP Terminus.
        (code, data, etc.)


        ***** DELETE WITHIN ZIP:
             Selective file delete WITHIN a ZIP.

        ***** TAG FILE(s) FOR UNZIP:
             Choice of which file(s) within a ZIP to extract.




                                   - PAGE 11 -


        ***** AUTOCHECK VIRUS SCAN:

             You will need to have the location of McAfee's SCAN.EXE program
        clearly defined in the Default Table to utilize this function.
        The AUTOCHECK function is available in the ZIPUP and UNZIP menus.
        This function is turned on by pressing F8. All the files you select
        to be placed into a ZIP file are first submitted to virus scan. The
        ZIPUP process will be aborted if a virus is detected. You can bypass
        this feature by turning AUTOCHECK off.(F8 toggles state). All files
        that are UNZIPPED are also automatically checked for virus infection.
        Please register SCAN.EXE with McAfee Associates if you use it with
        the TERMINUS. It is suggested that a manual virus scan, main menu #4,
        with memory check turned on should be used as a followup.

        Be aware that a ZIP file should have the files within extracted first
        before checking for virus infections. This includes ZIPS within ZIPS.

        ***** VIRUS SCAN SUBMENU:

             Main menu select #4 activates the virus scan submenu. Here you
        may scan entire subdirectories or logical drives for virus infection
        using the McAfee Associates program SCAN.EXE .  It is suggested
        that you should use the EXTRACT submenu with the virus scan option
        ON! if you wish to check ZIP files for virus infection. Default #12
        sets the SCAN options. /MANY is ignored during subdirectory scans.
        The /A /M /CHKHI options are forced on for all virus scan operations.

        ***** VIRUS FOUND! CONTINUE or HALT ?

             A visual/audible alarm is issued when possible virus is detected.
        You must enter the correct password to continue from this point. The
        password required is the same password used for ZIPUP/UNZIP garble
        operations. It may be user defined and entered into the default table.

             You will have two options at his point: #1. Continue program
        operation; #2. Immediately HALT program operation and return to DOS.
        It is highly suggested that you HALT operation, return to DOS, and
        then shut your system down to prevent further spread of any possible
        computer virus. Please read the documentation that came with your
        copy of SCAN or CLEAN to find out how to contend with computer virus
        infection.

          IT IS STRONGLY SUGGESTED THAT YOU SEEK EXPERIENCED HELP IN DEALING
                             WITH COMPUTER VIRUS INFECTIONS!




                                   - PAGE 12 -


      ***** DIRECTORY PATH SELECT:(PATH FINDER)


          The Following limitations are imposed:

          1. Only paths 64 characters or less are included in the selection
             list.
          2. A 35 character limition on selected paths is imposed when user
             is attempting to grab a path to be placed in the default table.
             User is warned and allowed to make another selection.
          3. Maximum of 512 paths with manual entry mechanism provided for
             monster systems, etc.

          Path Finder will develop a list with a maximum of 512 paths/dirs
          starting with the ROOT directories first and working in. This is
          usually good enough for most systems. However, some users maintain
          massive file/dir inventories. Therefore, a manual entry is provided
          for paths/dirs not found on the list. The following are active:

          <PGDN> <PGUP> = Display next or previous window page.

          <ENTER>       = Selects highlighted path.

          CTRL-E        = Enter a path/dir not on the list.

          CTRL-N        = Select new drive and path - display new list

          CTRL-P        = Hardcopy print of the path list with stats.

          CTRL-T        = Creates an ASCII text file of the path list
                          in the ROOT directory of the drive that was
                          scanned.

          <ESC>         = Quit and return to submenu.

          F1,F10        = HELP


         ***** NOTE: Changing a path with ALT-P while you are in a submenu
               WILL NOT CHANGE THE DEFAULT value for that path. Changing a
               path while you are in the CHANGE DEFAULT area WILL NOT change
               the CURRENT PATH value.




                                   - PAGE 13 -


         ***** SCREEN SAVER :

              The screen saver is a NON-interrupt driven function which
         blanks your computer screen after a pre-determined period of
         keyboard or mouse inactivity. The screen saver is turned on
         from the Default Table(press F5). Users may enter from 1 to
         60 minutes of *approximate* delay time before the screen saver
         becomes active. This program feature will help to prevent screen
         burn due to prolonged static display.

             The screen saver responds to keypress AND mouse clicks. The
         screen saver will not interfere with system I/O's and other
         program functions. The following area of ZIP Terminus program
         operation IGNOREs the screen saver:

         1. Any point of keyboard string entry(i.e. Enter Password, etc.)


         ***** DOS BATCH FILES:

            This might be considered a function for intermediate to advanced
            users. Some users of TERMINUS have constructed custom DOS BATCH
            files which they use to perform a variety of functions like,
            file copying & deleting, recursive ZIPs, etc. MAIN MENU selection
            #5 allows you to select a DOS batch file and execute it right
            from TERMINUS.  This version of ZIP TERMINUS allows the user to
            select batch files found on ANY logical drive and/or subdirectory.
            Read your DOS manual for more information on DOS BATCH file syntax
            and construction. Terminus must be able to find COMMAND.COM to
            be able to run your selected batch file. Floppy users MUST copy
            COMMAND.COM to the work disk. Put COMMAND.COM in the ROOT
            directory of the disk along with all other required program files.

          ***** BULLETIN BOARD POSTING:

               The preferred way to post THE ZIP TERMINUS on local bulletin
          boards, Compuserve, PClink, America ONline, etc. is to upload
          the original PKZIP Authenticated archive with the filename:

                                   ZTEC62C.ZIP

        ***** VIRUS DETECTION ADDENDUM:

           DO NOT use the ZIP Terminus virus scan functions in any
      environment or on any machine where another virus disinfector utility
      is installed and running. This includes but is not limited to TSR virus
      utilities. No claim is made herein or otherwise as to compatibility
      with other author/program virus disinfector & detector utilities.

   ***** NOTE: The ZIP Terminus virus scan functions SHOULD NOT be
               used with any other virus detection or disinfection software.
               This warning extends but is not limited to TSR type detectors.
               Use The ZIP Terminus in concert with the McAfee Associates
               anti-virus programs ONLY for best results.



                                   - PAGE 14 -



        ***** ZIP TERMINUS START-UP OPTIONS:

             /S = Reduce possible "video snow" on older CGA displays

             /M = Eliminate window background colors. Useful on systems
                  which utilize a single color display(green, amber,etc.)
                  and a CGA adapter or on LAPTOP displays. Not necessary
                  when using a true IBM MDA monochrome display setup. MDA
                  mode is automatically detected.

             /Q   Quiet mode .... turn sound routines off!

      C> zt62C.exe /M   <press ENTER>  or  D> zt62C.exe /Q   <press ENTER>
          or any combination thereof   C> zt62C.exe /QMS   <press ENTER>


                           ***** UPDATE INFORMATION *****

        ZTEC62C

          1. Smoothed keyboard/mouse operation during path select
             operations, etc. (high speed machines)

          2. Added further point/shoot capability to file/path display

          3. Increased path selection support to directories 64 chars
             in length.

          4. ZIP Terminus now requires only one executable file for
             all functions. ZTCF1.EXE and ZTCF2.EXE have been merged
             with ZT62C.EXE

          5. Added screen saver with user option of delay 1..60 min
             Screen saver is program integrated, not memory resident
             TSR etc.

          6. Incorporated main menu selection for program self-test.
             McAfee Associates SCAN.EXE is required.

          7. Added WINDOWS icon STC.ICO for user convenience. The ZIP
             TERMINUS is a DOS APPLICATION/UTILITY and should be run
             FULL window. /UNATTEND should be added to the SCAN options
             list. (DEFAULT TABLE) DOS v3.1 or higher required.

          8. Added startup option /Q which turns sound routines off

          9. ZIP Terminus now sets the DOS errorlevel on exit. If a
             possible virus infection is indicated during a virus scan
             (self-test, drive or directory scan, archive inspection,
             etc.)  a flag is set so that on exit the DOS errorlevel = 1
             Normal exit with no virus detected  ---> DOS errorlevel = 0

         10. Made correction to file select display. Also added seconds
             time field.


                                   - PAGE 15 -


                  PRODUCT REGISTRATION -- PERSONAL USE ONLY!
               ANY OTHER USE REQUIRES A NEGOTIATED SITE LICENSE

  PAID Registration gives license and right to use The ZIP Terminus on a
  single machine, a copy of most recent version, updates as described below.
  A PAID negotiated site license is required for educational, business,
  corporation, government and/or agency environment use. This registration
  does not apply to any underlying programs used in conjunction with The ZIP
  Terminus. For a list of files contained in The ZIP Terminus program package
  please read page 2 of this document.(ZTEC62C)

      NAME       : ________________________   CHOOSE ONE DISK MEDIA TYPE
      STREET     : ________________________      5.25" ____  3.5" ____
      CITY       : ________________________
      STATE/PROV.: ________________________   OWN/USE A MODEM ? Y__ N__
      ZIP CODE   : ________________________
      COUNTRY    : ________________________    TERMINUS OBTAINED FROM?
                                               _______________________
                                               _______________________

                                   |  REGISTRATION / LICENSE      = $ 20.00
        ONLY U.S. FUNDS ACCEPTED!  |  NJ RESIDENTS ADD SALES TAX  = $
                                   |                                -------
        MAKE YOUR REMITTANCE TO:   |                   SUB-TOTAL  = $
                                   |  SHIPPING AND HANDLING       = $  4.00
             S.T.CALISE            |  OVERSEAS SHIPMENT ADD $2.00 = $
        673 HERBERTSVILLE ROAD     |                                -------
        BRICK, NJ  08724  USA      |                       TOTAL  = $

              REGISTERED users of V6.2C are eligible for upgrades
              to any subsequent release. Please send $6.00 U.S. funds
              to the author at the above address. Don't forget to specify
              disk media type and your current address. Instant update/
              upgrade is available for PAID REGISTERED users starting with
              v6.0 and higher. Please write to S.T.Calise at the above
              address for more information.

     STC BBS  908-206-1386  2400 .. 14.4K  v.32/.32bis v.42/.42bis MNP 1-5
  ---------------------------------------------------------------------------

    For registration/license information on VIRUSCAN(SCAN), CLEAN, and other
    McAfee Associates programs please contact:

          McAfee Associates                (408) 988-3832 office
          3350 Scott Blvd, Bldg. 14        (408) 970-9727 fax
          Santa Clara, CA  95054
          U.S.A.

    For registration/license information on PKZIP, PKUNZIP, and other
    PKWARE Inc. programs please contact:

          PKWARE Inc.                      (414) 354-8699 office
          9025 N. Deerwood Drive           (414) 354-8559 fax
          Brown Deer, WI  53223



                                   - PAGE 16 -



                                ACKNOWLEDGEMENTS


                      SCAN(VIRUSCAN), CLEAN, VALIDATE, VIRLIST
                    Copyright (c) 1989-1992 by McAfee Associates.

    IBM is a registered trademark of International Business Machines
    PKZIP(tm), PKUNZIP(tm), PKSFX(tm) registered trademarks of PKWARE,Inc.
    COMMAND.COM is copyright by Microsoft Corporation
    Windows and OS/2 are trademarks of Microsoft Coproration
