Copy II (C)(Ver 1.0) By Russprog.

1. Requirements
2. Installation
3. Use
4. Stopping
5. Bugs

1. Requirements

286 or higher
DOS 5x or higher (Win 95 or 98 command prompt)
Floppy drive (A:)

2. Installation

Double click on " setpbu.bat " if your using Windows 95 or 98. If your 
using DOS type in " setpbu ".  It will then install it to the COMMAND
directory. The path is "C:\windows\command\copy2.bat"

3. Use.

This will assist in copying files from one disket in the floppy drive A
to another one in floppy drive A.  To use, double click on copy2.bat if 
you in Windows 95 or Windows 98 "My Computer" or "Windows Explorer". If
your in DOS, type " copy2 " and it will begin.

4. Stopping

To stop at anytime, press and hold "Control" and then "C". It will then
ask if you want to terminate the batch. Type "Y" and close the menu

5. Bugs

When installing it to the COMMAND directory, Copy II may not work when 
your in any other directory when using DOS besides COMMAND.  To fix this, 
you will need to type this when not in the COMMAND directory 
" path c:\windows\command ".  It will then work, but you must do this
everytime you use the DOS way of using Copy II.  It may work though
with out having doing all that.

COMMENTS, QUESTIONS:
e-mail:   remoore@ionet.net