
       Please  register the products. I worked hard, many years, to improve
   your work.

GNCPP  - Generic Numeric Control Post Processor                         99 USD
GNCPPDK- Generic Numeric Control Post Processor Development Kit         39 USD
TPoints- TechnoPoints   V1.0; (converts a set of points in a mesh     ) 59 USD
TCurves- TechnoCurves   V1.0; (converts a set of curves in a mesh     ) 59 USD
TFunct - TechnoFunction V1.0; (converts a function in a DXF file      ) 59 USD
pl2nc  - PolyLineToNC   V2.0; (converts DXF, PLT, CNC in NC via GNCPP ) 39 USD
ms2nc  - MeshToNC       V1.0; (converts meshes in DXF in NC via GNCPP ) 39 USD
nc2nc  - NCToNC         V1.0; (converts other NC in NC via GNCPP      ) 39 USD
TT     - TechnoTurn     V1.0; (simulator for turning and GNC gen.     ) 39 USD

TCADLIT- TechnoCurves & TechnoPoints & TechnoFunction & GNCPP+GNCPPDK )299 USD

TCADPRO- TechnoCAD&CAM&Bulge+TCADLIT (full 3D packet for complex sf.  )899 USD

VC,VD  - ViewCNC & ViewDXF  ; (Viewers for DXF & CNC                  )  0 USD


       upgrades are at 1/3 of price;

       AcroSpin, AcroTrans - call David B. Parker for registration;

       For  registration  please add your entry in the subdirectory REGISTR
   and  run  the  batch  file for registering (or for application that have
   incorporate  registrations  routine  like  TechnoPoints, TechnoCurves or
   TechnoCAD  answer  with  yes at first query). Note the nr. pay the money
   and send me a mail with your name and nr. that registration program tell
   you.  I  will send you your serial nr. and, of course, in the future you
   can buy the next versions at upgrade price.

       If  you  plan to sell your own software that use GNCPP, email me for
   your rights. This license is for one user only !


  All money please put in:
  ------------------------
  Banca     : Turco-Romana
  Suc.      : Timisoara
  Cont[$] nr: 90852

  Send an email with products you want to registry.
  -------------------------------------------------

 DISCLAIMER
 ----------
       ALL  SOFTWARE  ARE  PROVIDED  AS  IS,  WITHOUT WARRANTY OF ANY KIND,
   EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES
   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK
   AS  TO  THE  QUALITY  AND PERFORMANCE IS WITH YOU. THE AUTHOR ASSUMES NO
   LIABILITY  FOR  DAMAGES,  DIRECT OR CONSEQUENTIAL, WHICH MAY RESULT FROM
   THE USE OF THIS SOFTWARE.

       GNC,  GNCPP, GNCPPDK, TechnoCAD, TechnoCAM, TechnoMesh, TechnoBulge,
   TechnoPoints, TechnoCurves, TechnoTurn are copyrights of Dan Micsa.

       AcroSpin, AcroTrans are copyrigth of David B. Parker.

       Thanks for using my products !


       Please  don't  forget you can work 1 day for me I work 6 years (2000
   days) for you !

Thanks Dan MICSA

