
    Notice to users upgrading from version 4.0
    ==========================================

    QCopy v5.1 is the first upgrade to the English version since the 
    release of version 4.0.  
    
    We strongly recommend that you delete all the old QCopy files from 
    version 4.0 and install version 5.1 from anew, since most of the new 
    files have the same names as those of the previous version.  Should 
    you wish to experiment with v5.1 before erasing v4.0, then you MUST 
    install the new version 5.1 in a separate directory.  

    When you first run QCopy, the program looks at your system, the main 
    menu setup and generates the file QCOPY.CFG.  Every time you exit 
    QCOPY, this file is updated, which is how the program remembers what 
    your last settings were.  The file QCOPY.CFG may not indicate the 
    correct settings for QCopy if, for example, you have just made a 
    major systems change or upgrade (e.g. added more memory, compressed
    your hard drive, made certain changes in your CONFIG.SYS....).  If 
    QCopy used to work, but doesn't now, then there is a good reason to 
    suspect that QCOPY.CFG is no longer valid.  This could also happen 
    if you tried to upgrade the newer version into the same directory as 
    the older.  Again, the simplest solution is to erase all the QCopy 
    files and re-install QCopy.


    Version and revision history
    ============================
    
    Version 5.1
    -----------
    Revision 0      September 23, 1995     First released


    Version 4.0
    -----------
    Revision 0      August 01, 1992
    Revision A      September 14, 1992    Correction to translation of Boot
                                          error message.  New drivers.


