             The Built-In Keys and Mouse Actions Found in BOBBY
             ==================================================

* Refer to section 3.1:  "BOBBY's Main Screen Diagram" found in Manual.txt
  for a visual display of where things are in BOBBY.

LEFT/RIGHT DIRECTORY WINDOWS
============================
Keys:
`````
TAB               : Make the non-active Directory Window the active one.
(Up Cursor Key)   : The active Directory Window's scroll bar will attempt
                    to move up.
(Down Cursor Key) : The active Directory Window's scroll bar will attempt
                    to move down.
PAGE-UP           : Scroll Bar will attempt to jump one screen up of unseen
                    names found in the active directory window.
PAGE-DOWN         : Scroll Bar will attempt to jump one screen down of unseen
                    names found in the active directory window.
HOME              : Scroll Bar will jump to the very top of the active 
                    directory window path.
END               : Scroll Bar will jump to the very bottom of the active 
                    directory window path.

Mouse:
``````
+ RIGHT BUTTON in the window will make the window active (if it wasn't) and 
  attempt to scroll the display found in the window in that direction (half
  way up makes it scroll up; half way down makes it scroll down).  This is
  equivalent to using the scroll bar.
+ LEFT OR RIGHT BUTTON on the Directory Window Information Box (found above
  each Directory Window) will make that window the active one (it will turn
  pink -- default color).
+ LEFT BUTTON while highlighting (or dehighlighting) names and moving just
  pass the last file displayed (or the first file displayed) of the window
  will make the window scroll and highlight (or dehighlight) names in that
  direction.
+ LEFT BUTTON on any of the names in the active directory window and then a
  double-click by your RIGHT BUTTON in the non-active Directory Window will 
  place the non-active Directory Window into the path that name represents
  (and make this window the active one).  If the name was a directory you 
  will be placed in the directory of that name.  If the name was a file you
  will be placed in the same path as where this file is located.
+ Move your MOUSE POINTER into any Dir Win Information Bar (DIAGRAM: D-F for
  Dir Win 1 or N-P for Dir Win 2) and wait for a second.  A 'Macintosh-Like'
  Dir Win Status Bubble will appear near your mouse pointer telling you this
  Directory Path's DISK LABEL NAME, NUMBER OF FILES HIGHLIGHTED, and TOTAL
  NUMBER FILES shown in the Dir Win. You can also move your MOUSE POINTER
  down to the TECH INFO bar next to the BOBBY logo at the bottom of your
  screen(DIAGRAM: Z).


LEFT/RIGHT DIRECTORY WINDOW PATH INPUT BOX:
===========================================
* You must make this Input Box active by clicking inside of it.  You should
  see the box change color and a cursor appear.

Keys:
`````
(Up Cursor Key)   : Flip through any available previous paths that may have 
                    appeared in this box.
(Down Cursor Key) : Flip forward through any available paths that may have
                    appeared in this box.
(Right Cursor Key): Move the cursor found anywhere in the inputted path to 
                    the right.
(Left Cursor Key) : Move the cursor found anywhere in the inputted path to 
                    the left.
HOME              : Jump to the very beginning of the path input.
END               : Jump to the very end of the path input.
DEL               : Delete the character(s) in the path found to the right of
                    the shown cursor.    
BKSpce            : Delete the character(s) in the path found to the left of           
                    the shown cursor.
SHIFT-Right Cursor: Complete the unfinished directory name of the path you 
                    have inputted in the box.  The more letters you provide 
                    for the directory name the more accurate its displayed 
                    choice.
SHIFT-Left Cursor : Delete the entire path input found in the box and place      
                    the cursor at the very beginning.
ESC               : Cancel the input you have made in the box and put back 
                    the original path.
ENTER             : Confirm the input in the box and show it (as seen by its
                    contents in the Directory Window).  Paths that are given
                    in the box that are not found will make the box move 
                    continuously back one directory until it does find a path
                    it can access.

Mouse:
``````
+ LEFT BUTTON will place the cursor on the character the button was clicked
  on.
+ RIGHT BUTTON in the left half portion of the box will flip through any 
  available previous paths that may have appeared in this box.
+ RIGHT BUTTON in the right half portion of the box will flip forward through 
  any available paths that may have appeared in this box.


LEFT/RIGHT DIRECTORY WINDOW PATTERN INPUT BOX:
==============================================
* You must make this Input Box active by clicking inside of it.  You should
  see a cursor appear.

Keys:
`````
(Up Cursor Key)   : Flip through any available previous patterns that may 
                    have appeared in this box.
(Down Cursor Key) : Flip forward through any available patterns that may have
                    appeared in this box.
(Right Cursor Key): Move the cursor found anywhere in the inputted pattern to 
                    the right.
(Left Cursor Key) : Move the cursor found anywhere in the inputted pattern to 
                    the left.
HOME              : Jump to the very beginning of the pattern input.
END               : Jump to the very end of the pattern input.
DEL               : Delete the character(s) in the pattern found to the right 
                    of the shown cursor.    
BKSpce            : Delete the character(s) in the pattern found to the left 
                    of the shown cursor.
SHIFT-Left Cursor : Delete the entire pattern input found in the box and 
                    place the cursor at the very beginning.
ESC               : Cancel the input you have made in the box and put back 
                    the original pattern.
ENTER             : Confirm the input in the box and show the pattern of 
                    files that may appear in the path.  Patterns that are 
                    given in the box that are not found will show NO FILES in
                    that Directory Window.

Mouse:
``````
+ LEFT BUTTON will place the cursor on the character the button was clicked
  on.
+ RIGHT BUTTON in the left half portion of the box will flip through any 
  available previous patterns that may have appeared in this box.
+ RIGHT BUTTON in the right half portion of the box will flip forward through 
  any available patterns that may have appeared in this box.


ANY POPPED UP WINDOWS:
======================
* These are the windows that are brought up by clicked commands or available
  options found in BOBBY.
Keys:
`````
ESC               : Cancel the activity and close down this window.
                    Note: If the cursor is active in an input area of the 
                    window the ESC key will cancel out of the input and 
                    another ESC hit will close the window.
ENTER             : Accept and proceed with the activity that the window
                    is presenting.  The triangle display found on one of the
                    windows' buttons is the button that the ENTER key 
                    represents.


"VIEW A TEXT/BINARY FILE" WINDOW:
=================================
Keys:
`````
(Up Cursor Key)   : The text window's scroll bar will attempt to move up.
(Down Cursor Key) : The text window's scroll bar will attempt to move down.
PAGE-UP           : Scroll Bar will attempt to jump one screen up of unseen
                    lines found in the window.
PAGE-DOWN         : Scroll Bar will attempt to jump one screen down of unseen
                    lines found in the window.
HOME              : Scroll Bar will jump to the very top of the file.
END               : Scroll Bar will jump to the very bottom of the file. 
ESC               : Close down the View Window and go back to the manin BOBBY
                    screen.
ENTER             : Proceed to the next file to view (if any).  If no other 
                    files are left to view this key will close down the  
                    View Window and go back to the main BOBBY screen.

Mouse:
``````
+ RIGHT BUTTON in the window that holds the text display will scroll through
  any of the display not seen in the window.  The top half region of the 
  window represents going up and the bottom half region going down.  This is 
  equivalent to using the available scroll bar.
+ LEFT BUTTON on the TEXT MODE/BINARY MODE area located at the top-right of
  the screen will toggle between TEXT MODE and BINARY MODE for the present
  file.


PATH FINDER:
============
Keys:
`````
*When in the Path Input Area*
(Right Cursor Key): Move the cursor found anywhere in the inputted path to 
                    the right.
(Left Cursor Key) : Move the cursor found anywhere in the inputted path to 
                    the left.
HOME              : Jump to the very beginning of the path input.
END               : Jump to the very end of the path input.
DEL               : Delete the character(s) in the path found to the right of
                    the shown cursor.    
BKSpce            : Delete the character(s) in the path found to the left of           
                    the shown cursor.
SHIFT-Right Cursor: Complete the unfinished directory name of the path you 
                    have inputted in the box.  The more letters you provide 
                    for the directory name the more accurate its displayed 
                    choice.
SHIFT-Left Cursor : Delete the entire path input found in the box and place      
                    the cursor at the very beginning.
ESC               : Cancel the input you have made in the box and put back 
                    the original path.
ENTER             : Confirm the input in the box and show it (as seen by its
                    contents in the Window).  Paths that are given
                    in the box that are not found will make the box move 
                    continuously back one directory until it does find a path
                    it can access.

*When NOT in the Path Input Area*
(Up Cursor Key)   : The window's scroll bar will attempt to move up.
(Down Cursor Key) : The window's scroll bar will attempt to move down.
ESC               : Cancel the Path Finder Window and close it down.
ENTER             : Confirm the path found in this window to have placed in 
                    an input area.  The window will close down.
       
 
