PC Analyser 2.09
Contents:

1. Introduction
2. Features
3. Installation guide
4. File list
5. System requirements
6. Product ordering and pricing
7. About us

1. Introduction

	PC Analyser is multifunctional software program for PC hardware 
component certification and diagnostic. There are two supported function 
sets:
- Function for users (components testing and error reporting, benchmarks);
- Function for PC hardware experts and system programmers (access for the 4Gb 
address system memory, IO ports view/edit, PCI configuration space view/edit,
low-level access to disk drives, low level access to commands/pins/registers
of the hardware components).


2. Features

	PC Analyser has been built like specialized operating system. It has 
the Kernel, Drivers and Applications.
	The Drivers provide low-level operations with the hardware 
components, and built as control code and can be describe by following 
set:
- set of the Commands of the hardware component;
- set of the Pins of the hardware component;
- set of the Registers of the hardware component.

	This architecture is named CPR technology: Commands, Pins, and 
Registers.
	PC Analyser is a very large project; it currently is in progress. Now, 
only two functions available:
- F3: Memory browser for 4Gb-address space;
- F4: I/O Browser;
- F5: PCI Browser;
- F7: Commands/Pins/Registers (CPR) browser.

	Full set of CPR functions currently available only for the Serial Port. 
	We are planning to add new functions, add new hardware support, 
code and data structures optimization. We are planning to create an 
English Help.

3. Installation guide

	Installation is not required. You just copy PCA to any directory at you 
hard or floppy disk and run ANALYSER.EXE. Please do not change directory 
structure. 


4. File list

	Analyser.exe   - kernel of the system, run it for run PCA

PICTURE.VGA    graphics picture
<PROGRAMS>     applications
<WORK>         work directory for user files
<HARDWARE.VM1> drivers set for interface to PC
<SERVICE.VM2>  drivers set for service functions


5. System requirements

	CPU 486 or higher, Floating Point Unit (FPU) is required.
CPU must be in Real Mode. Remove EMM386/QEMM. You can't execute 
PCA as DOS task from Windows, because Windows work in protected mode 
and execute of DOS-task in Virtual86 mode and low-level access to 
hardware is very limited.

- 400Kb of Conventional Memory and 3Mb of Extended Memory
- VESA Compatible SVGA adapter supported 800x600-256 color mode
- DOS version 3.0 or higher

	Mouse is supported. User interface work better if mouse present.


6. Product ordering and pricing
	Now PC Analyser is freeware.


7. About us

	We are IC Book Group.

	New version of software you can get at:
	http://ic.doma.kiev.ua/

	Send your questions to Web-Master, please.
