



     BOOKBILD.TXT--Use PRINTDOC.BAT to print these docs,
     NOT WordPerfect!



               B   O   O   K   B   I   L   D       V   1 . 1
               =============================================


                    Pamphlet Creator and Book Formatter
                            for WordPerfect 5.1



               Requires WordPerfect 5.1 or 5.1+ (DOS version)





                         A Shareware Package from:

                                Jerry Stern
                            Science Translations
                              P. O. Box 20234
                          Baltimore, MD 21284-0234
                 Home page: http://www.execpc.com/scitrans

                         _______
                    ____|__     |               (R)
                 --|       |    |-------------------
                   |   ____|__  |  Association of
                   |  |       |_|  Shareware
                   |__|   o   |    Professionals
                 -----|   |   |---------------------
                      |___|___|    MEMBER


                          Quick-Start Guide Begins
                                 on Page 7

     BOOKBILD is a copyrighted program distributed as SHAREWARE. All
     rights are reserved. You may try out the program for up to 30
     days for free. If you continue to use this program, you must pay
     a registration fee of $20.00.

     Registered users receive a bonus disk of additional BOOKBATS clip
     art, technical support, notification of upgrades and new
     releases, with special upgrade pricing for registered users.




     B O O K B I L D   V. 1.1                                        2

     Table of Contents
     =================

     REGISTRATION  . . . . . . . . . . . . . . . . . . . . . . . .   3
          ASP Ombudsman  . . . . . . . . . . . . . . . . . . . . .   3
          CHANGES IN VERSION 1.1 . . . . . . . . . . . . . . . . .   4
          OTHER FILES  . . . . . . . . . . . . . . . . . . . . . .   4

     DEFINITION OF SHAREWARE . . . . . . . . . . . . . . . . . . .   4
          LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . .   5
          TRIAL USE LICENSE  . . . . . . . . . . . . . . . . . . .   5
          LIMITED DISTRIBUTION LICENSE . . . . . . . . . . . . . .   6

     QUICK START . . . . . . . . . . . . . . . . . . . . . . . . .   7

     CHOOSING A BOOKLET FORMAT . . . . . . . . . . . . . . . . . .   9
          VERTICALLY-FOLDED LANDSCAPE  . . . . . . . . . . . . . .   9
          VERTICALLY FOLDED PORTRAIT . . . . . . . . . . . . . . .   9
          HORIZONTALLY FOLDED LANDSCAPE  . . . . . . . . . . . . .  10
          HORIZONTALLY-FOLDED PORTRAIT . . . . . . . . . . . . . .  10

     DEFINING A LABEL  . . . . . . . . . . . . . . . . . . . . . .  11
          LABELS . . . . . . . . . . . . . . . . . . . . . . . . .  12

     PREPARING A BOOKLET FOR REORDERING  . . . . . . . . . . . . .  13
          SELECT A PAPER TYPE  . . . . . . . . . . . . . . . . . .  13
          MOVE ALL CODES TO DOCUMENT INITIAL CODES . . . . . . . .  14
          ADD A BASE FONT CODE . . . . . . . . . . . . . . . . . .  14
          RESTORE ALL TEXT TO THE BASE FONT  . . . . . . . . . . .  14
          GENERATE ALL TABLES  . . . . . . . . . . . . . . . . . .  14
          READY? RUN BOOKBILD! . . . . . . . . . . . . . . . . . .  15

     PREPARING THE REORDERED BOOKLET FOR PRINTING  . . . . . . . .  15
          PRINTING THE BOOKLET . . . . . . . . . . . . . . . . . .  15
          TALKING TO PRINTING COMPANIES  . . . . . . . . . . . . .  16

     TROUBLE-SHOOTER'S GUIDE . . . . . . . . . . . . . . . . . . .  17

     INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18












     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                        3

     REGISTRATION
     ============

     BOOKBILD/DOS V. 1.1 is shareware, or "Try before you buy"
     software. You may copy this entire package and pass it on
     unchanged to other WordPerfect users. If you use the program for
     more than 30 days, you must register. Basic registration is
     $US 20., and a variety of payment types are listed in the files
     REGISTER.TXT and PRODUCTS.TXT, including Visa, MasterCard, and
     American Express.

     Send registrations to:
          Jerry Stern
          Science Translations
          PO BOX 20234
          Baltimore, Maryland 21284-0234

     Or Phone of FAX to 1-410-661-2224
     Add $2.00 Shipping on orders below $30.
     Maryland residents add 5 per cent sales tax.

     Registered users receive a bonus disk of additional BOOKBATS clip
     art, technical support, notification of upgrades and new
     releases, with special upgrade pricing for registered users.
     Support is by mail, FAX, or phone, at the same address and phone
     number used for registration.

     Support is by mail, FAX, or phone, at the same address and phone
     number used for registration, or via the SciTrans support
     conference on GEnie--in the WordPerfect RT, Third-Party Support
     category, SciTrans topic. You may contact the author as J.Stern10
     on GEnie, as 72144,1241 on Compuserve, or on the Internet as
     72144.1241@compuserve.com. Look in the VENDINFO.DIZ file for
     support boards and additional contact info.

          Jerry Stern is a member of the Association of Shareware
          Professionals (ASP). ASP wants to make sure that the
          shareware principle works for you. If you are unable to
          resolve a shareware-related problem with an ASP member by
          contacting the member directly, ASP may be able to help. The
          ASP Ombudsman can help you resolve a dispute or problem with
          an ASP member, but does not provide technical support for
          members' products. Please write to The ASP Ombudsman, at 545
          Grover Road, Muskegon, MI 49442, or send a CompuServe
          message via CompuServe Mail to: ASP Ombudsman 70007,3536.

     WordPerfect and WP Corp are registered trademarks of WordPerfect
     Corporation within the U.S. and other countries.



     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                        4

     CHANGES IN VERSION 1.1
     ----------------------

     There are no changes in program features in version 1.1 of
     Bookbild. Support information has been updated in this release,
     and some minor changes and additions made to the documentation.
     No bug fixes were necessary.


     OTHER FILES
     -----------

     In the VENDINFO.DIZ file, there is a list of the files included
     in this release of Bookbild 1.1 for DOS. If any are missing or if
     the sizes and dates do not match that list, the package has been
     tampered with. Any additional files are not part of Bookbild.
     Registered users receive a current and complete copy.

     For more information, see these files:

     REGISTER.TXT   Order form for registering Bookbild for DOS and
          other products.
     PRODUCTS.TXT   Product information. Includes other wonderful
          products from Jerry Stern and Science Translations,
          including GRAPHCAT, BOOKBILD, the Letterhead Kit, each
          available for both DOS and Windows, and the Wood Clips
          collections of clip art.


     The files with .WPG extensions are BOOKBATS clip art images--
     chapter ending markers in the Wood Clips series of clip art. More
     are provided free to registered users. When you register, your
     bonus disk will contain additional Wood Clips, and additional
     collections are available by subject.


     DEFINITION OF SHAREWARE
     =======================

     Shareware distribution gives users a chance to try software
     before buying it. If you try a Shareware program and continue
     using it, you are legally required to register. With
     registration, you get anything from the simple right to continue
     using the software to an updated program with printed manual.

     Copyright laws apply to both Shareware and commercial software,
     and the copyright holder retains all rights, with a few specific
     exceptions as stated below. Shareware authors are accomplished
     programmers, just like commercial authors, and the programs are
     of comparable quality. (In both cases, there are good programs

     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                        5

     and bad ones!) The main difference is in the method of
     distribution. The author specifically grants the right to copy
     and distribute the software, either to all and sundry or to a
     specific group. For example, some authors require written
     permission before a commercial disk vendor may copy their
     Shareware.

     Shareware is a distribution method, not a type of software. You
     should find software that suits your needs and pocketbook,
     whether it's commercial or Shareware. The Shareware system makes
     fitting your needs easier, because you can try before you buy.
     And because the overhead is low, prices are low also. Shareware
     has the ultimate money-back guarantee--if you don't use the
     product, you don't pay for it.


     LIMITED WARRANTY

     THIS SOFTWARE AND MANUAL ARE PROVIDED FOR EVALUATION ONLY, ON AN
     "AS IS" BASIS.  SCIENCE TRANSLATIONS DISCLAIMS ALL WARRANTIES
     RELATING TO THIS SOFTWARE, WHETHER EXPRESSED  OR IMPLIED,
     INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NEITHER
     SCIENCE TRANSLATIONS NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE
     CREATION, PRODUCTION, OR DELIVERY OF THIS SOFTWARE SHALL BE
     LIABLE FOR ANY INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES
     ARISING OUT OF THE USE OR INABILITY TO USE SUCH SOFTWARE, EVEN IF
     SCIENCE TRANSLATIONS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
     DAMAGES OR CLAIMS. THE PERSON USING THE SOFTWARE BEARS ALL RISK
     AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE.

     This agreement shall be governed by the laws of the State of
     Maryland and shall inure to the benefit of Science Translations
     and any successors, administrators, heirs and assigns. Any action
     or proceeding brought by either party against the other arising
     out of or related to this agreement shall be brought only in a
     STATE or FEDERAL COURT of competent jurisdiction located in
     Baltimore County, Maryland. The parties hereby consent to in
     personam jurisdiction of said courts.

     TRIAL USE LICENSE

     Bookbild is NOT a public domain program.  It is copyrighted by
     Science Translations. This software and accompanying
     documentation are protected by United States Copyright law and
     also by International Treaty provisions.

     Science Translations grants you a limited license to use this
     software for evaluation purposes for a period not to exceed
     thirty days. If you continue using this software after the

     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                        6

     thirty-day evaluation period, you MUST make a registration
     payment to Science Translations.

     LIMITED DISTRIBUTION LICENSE

     INDIVIDUALS may distribute Bookbild to friends or associates,
     provided they charge no fees for this service, and they convey a
     complete and unaltered copy of the shareware version of this
     product.

     All other distribution is allowed only under the terms of the
     attached VENDINFO data record, which is hereby incorporated by
     reference. Any distribution satisfying all the distribution
     requirements expressed in that data record is hereby authorized.
     You may not distribute this product, modify it, or bundle it with
     other products except as specifically allowed therein. You may
     not use, copy, rent, lease, sell, modify, decompile, disassemble,
     otherwise reverse engineer, or transfer the licensed program
     except as provided in this agreement.  Any such unauthorized use
     shall result in immediate and automatic termination of this
     license.

     Permission to distribute the Bookbild package is not
     transferable, assignable, saleable, or franchisable.  Each vendor
     wishing to distribute the package must independently satisfy the
     terms of this limited distribution license.

     U.S. Government Information:  Use, duplication, or disclosure by
     the U.S. Government of the computer software and documentation in
     this package shall be subject to the restricted rights applicable
     to commercial computer software as set forth in subdivision
     (b)(3)(ii) of the Rights in Technical Data and Computer Software
     clause at 252.227-7013 (DFARS 52.227-7013).  The
     Contractor/manufacturer is Science Translations, Box 20234,
     Baltimore, MD 21284-0234.

     Science Translations may revoke any permissions granted here, by
     notifying you in writing.  All rights not expressly granted here
     are reserved to Science Translations.

     You are encouraged to pass a copy of the unregistered version of
     Bookbild along to your friends for evaluation. Please encourage
     them to register their copy if they find that they can use it.
     All registered users will receive a copy of the latest version of
     Bookbild, additional BookBats chapter-ending graphics, discounted
     upgrades, newsletter announcements of upgrades and new products,
     and technical support.

     Site Licenses, volume discounts, and additional INTERNATIONAL
     registration information are in the file PRODUCTS.TXT.

     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                        7

     QUICK START
     ===========

     BOOKBILD requires WordPerfect 5.1, DOS version. It is a shareware
     package featuring a WordPerfect macro that will convert a
     formatted file into a two-across pamphlet in either landscape or
     portrait orientation, with either a vertical fold (the usual) or
     a horizontal fold (a brochure that opens up rather than across).
     Any booklet length is possible. Because the fonts native to your
     printer or font package are used, landscape booklets are only
     possible if you can already use landscape printing.


          Caution: this is not an introductory-level exercise, even
          with BOOKBILD to help. Although the actions of the macro are
          straightforward, when you rearrange all the pages of a
          formatted document, especially one containing font changes,
          strange things happen. READ THIS DOC FILE ALL THE WAY
          THROUGH! There is a list of steps to follow while preparing
          to run BOOKBILD, and using the list as a checklist will save
          you time and aggravation. Once you have done a few brochures
          with BOOKBILD, you'll only need a memory jog, and BOOKBILD
          has that function built into its opening screen.


     Here are the basic steps: 

     1) Copy the macro to the WP macro directory. (See the
     installation instructions on page ?.)

     2) Define a two-page layout as a pair of labels. (See page 9 for
     help in choosing the shape and orientation of the booklet, and
     page 11 for help defining a label size/type.)

     3) Format the text, graphics, and so forth as you wish. Move
     every possible code to Document Initial Codes. Add a Base Font
     code to Document Initial Codes to replace the Initial Base Font.
     Balance all the open codes, so that all margin changes, line
     spacing codes, tab sets, and font changes are restored to their
     standard value for the document at the bottom of every page. (See
     page 13 for the details of preparation.)

     4) Generate any cross-references, lists, and tables of contents,
     if necessary, and save the file.

     5) Run the BOOKBILD macro. When it finishes running, your
     original document will have been replaced by the reordered
     document.



     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                        8

     6) After the conversion, you will still need to move headers and
     footers, and add Suppress codes to keep those codes from printing
     on pages where they don't belong. These remaining steps cannot be
     done by the macro, because only you, as the designer of your own
     document, can understand what you really want the finished
     product to look like. Starting with the file as created by
     BOOKBILD, move any header and footer codes to the new beginning
     page of the booklet, e.g. page 4 on a one-sheet booklet, and add
     Suppress codes as needed. Preview and print as you like, but if
     you must make editing changes that affect page breaks, make the
     editing changes in the original file (not the result file), and
     then save and run BOOKBILD again.


          International Users: Although BOOKBILD's prompts are in
          English, all of the internal macro commands and menu choices
          have been set using international equivalents. BOOKBILD
          should work properly with ANY WP 5.1 language module.
          However, I have not been able to test every possible
          international combination of software, interim release, and
          hardware. Please write if you find that BOOKBILD fails in
          any way on your system.

     INSTALLATION
     ------------

     If you are reading these files on screen, you may print them with
     the PRINTDOC.BAT batch file. (Don't print them from WordPerfect--
     they are formatted with page breaks for printing from DOS.)

     From the DOS prompt, log to the directory holding the BOOKBILD
     distribution files. Type  PRINTDOC and press Enter.

     You may use BOOKBILD entirely from a floppy disk if you wish, but
     the macro should be copied to your hard disk to be used easily.
     To install the BOOKBILD macros to the WordPerfect macro
     directory, run the batch file INSTALL.BAT from the DOS prompt
     while logged to the BOOKBILD distribution disk or directory.
     Start INSTALL.BAT with the new directory name to make for storing
     the BOOKBILD docs and samples, and the name of the macro
     directory used by WordPerfect, usually c:\wp51\wpm or c:\wp51.

     For example: 
     INSTALL c:\bookbild c:\wp51
     (Copies package to c:\bookbild, using c:\wp51 for WP/DOS macros.)

     INSTALL c:\bookbild d:\wp51\wpm
     (Copies package to c:\bookbild, using d:\wp51\wpm for WP/DOS
     macros.)


     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                        9

     If you do not know where your WordPerfect macros should be
     placed, press Setup (Shift-F1), choose (6) Location of Files, and
     write down the setting next to (2) Keyboard/Macro Files. Press
     Cancel (F1) twice to return to the document screen. The entry
     that you wrote down should be the first pathname used on the
     install command line.


     CHOOSING A BOOKLET FORMAT
     =========================

     Just as not every project has the same needs, not every booklet
     will be printed in landscape mode. The simplest brochure is just
     a normal page, printed in two columns, and folded between the
     columns. There are four basic formats. Each booklet will be
     printed in portrait mode (across the short measurement of the
     paper), or in landscape mode (across the long way). Each booklet
     will be folded either vertically or horizontally. U.S. legal
     paper is only practical for two of these formats, the vertically-
     folded landscape, and the horizontally-folded portrait styles.

     The two horizontally-folded formats require upside-down printing,
     but in this case that is very simple. After reordering the pages
     with BOOKBILD, print only the first side of each page. Then turn
     the stack around end-for-end as well as turning the other face
     up, and print the second set of sides. Each page will hold two
     booklet pages in the same orientation on one side, and two
     booklet pages upside down on the other. Users of duplex printers:
     this is NOT standard duplex, or double-sided, printing, so use
     the printer to print only side of each page at a time.


     VERTICALLY-FOLDED LANDSCAPE
     ---------------------------

     This is the most common booklet format, good for instruction
     manuals and event programs. Use Landscape fonts, and fold
     vertically, so that the folded booklet has the bound or stapled
     edge on the left.

     Paper Size                    Folded Form
     U.S. Letter 8 1/2" x 11"      5 1/2" wide x 8 1/2" tall
     U.S. Legal  8 1/2" x 14"      7" wide by 8 1/2" tall
     A4   210mm x 297mm            A5 or 148mm wide by 210mm high


     VERTICALLY FOLDED PORTRAIT
     --------------------------



     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                       10

     This format is tall and narrow, and suitable for short brochures.
     Use portrait fonts, and fold vertically, for a left-hand bound
     edge.

     Paper Size                    Folded Form
     U.S. Letter 8 1/2" x 11"      4 1/4" wide x 11" tall
     A4   210mm x 297mm            105mm wide by 297mm high


     HORIZONTALLY FOLDED LANDSCAPE
     -----------------------------

     A wide and short format, good for short brochures. Use landscape
     fonts, and fold so that the bound edge is at the top. When
     printing, the paper must be turned around end for end before
     printing the second side.

     Paper Size                    Folded Form
     U.S. Letter 8 1/2" x 11"      11" wide x 4 1/4" tall
     A4   210mm x 297mm            297mm wide by 105mm high


     HORIZONTALLY-FOLDED PORTRAIT
     ----------------------------

     This style shares the same sizes with the vertically-folded
     landscape, but the print travels across the wide direction of the
     page. Use portrait fonts, and position the folded edge at the
     top.

     This format works well for printed inserts to be included with
     videotapes--use letter or A4 paper, allow margins in the label
     definition, and trim them off before folding. When printing, the
     paper must be turned around end for end before printing the
     second side.

     Paper Size                    Folded Form
     U.S. Letter 8 1/2" x 11"      8 1/2" wide x 5 1/2" tall
     U.S. Legal  8 1/2" x 14"      8 1/2" wide by 7" tall
     A4   210mm x 297mm            A5 or 210mm wide by 148.5mm high











     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                       11

     DEFINING A LABEL
     ================

     Before you can create a booklet, you must describe to WordPerfect
     what size of paper you will print it on. A paper definition
     contains not just the measurements of the page, but also the
     margins, whether the page is to be printed across the short side
     (portrait) or lengthwise (landscape).

     All paper definitions are stored by WordPerfect in the "PRS"
     file, or Printer Resource file. If you use more than one printer,
     or more than one printer resource file, you must create a booklet
     paper definition in every PRS file that you will use to format
     and print booklets. For example, if you are using a HP LaserJet
     II and LaserTools' TrueType-for-WordPerfect program for scalable
     fonts, than you can print with either the HP driver, or the
     TTWP-LaserJet driver. Create the booklet definition with both by
     pressing Print (Shift-F7), (S) Select Printer, and choosing the
     first PRS file, pressing Exit (F7), and entering the steps below.
     Then select the next PRS file, and enter the same steps again.

     Labels are also defined as paper types, and our booklets are
     built as sheets of labels, each with two half-page labels on
     them. The steps below will show you how to create a label
     definition for a vertically-folded landscape booklet--the most
     common type. For other types, just substitute the choices shown
     in the "Choosing a Booklet Format" section, starting on page 9.

     From the document screen, press Format (Shift-F8), (2) Page, (7)
     Paper Size, (2) Add, (9) Other, type "Booklet" and press (Enter).
     The "Edit Paper Definition" screen should appear.

     1) Paper Size: Choose either (2) Standard Landscape or (9) A4
     Landscape. The message, "Label information needs to be updated
     for this paper size" may appear, and you will be returned to the
     "Edit Paper Definition" menu.

     2) Paper Type: You have already entered this item. If you will
     create more than one booklet format, enter a more specific name,
     such as "Tall Booklet." WordPerfect will add "-Wide" to all
     landscape paper types automatically.

     3) Font Type: For the standard booklet, choose Landscape fonts.

     4) Prompt to Load: The default choice here is "No." If you change
     it to "Yes," WordPerfect will remind you to feed paper for every
     sheet you print. Whenever possible, leave this setting at "No."

     5) Location: The default choice is "Continuous." You may need to
     change this for some multi-bin printers--see your printer manual.

     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                       12

     A printer that uses cut paper but feeds itself automatically is
     considered "Continuous."

     6) Double Sided Printing: If your printer can print on both sides
     of the paper, and you are creating a vertical-fold booklet, set
     this to "Yes." For all other printers, and duplex printers used
     with horizontal-fold booklets, leave this setting at "No."

     7) Binding Edge: Leave this setting at the default--it will not
     be useful while creating booklets.

     8) Labels: See below.

     9) Text Adjustment: Leave these settings at zero. They are useful
     for aligning printouts on labels, but will usually not be helpful
     here.

     LABELS
     ------

     When you press 8) Labels from the "Edit Paper Definition" menu,
     choose (Y) Yes. The screen will change to the "Format: Labels"
     menu.

     1) Label Size: For letter paper, enter 5.5" for the width, and
     8.5" for the height. For A4 paper, enter 148mm for the width, and
     210mm for the height. For other formats, see the list starting on
     page 9.

     2) Number of Labels: Enter 2 columns and 1 row for all
     vertically-folded booklets. For horizontally-folded booklets, use
     1 column and 2 rows.

     3) Top Left Corner: Set these measurements to zero.

     4) Distance Between Labels: Set these measurements to zero.

     5) Label Margins: Set these measurements to the default margins
     you would like for your booklet pages, probably 1/2" or 12mm
     each. These numbers must be greater than or equal to your minimum
     printer margins, but you don't need to look them up. When you go
     on to the next step, if you have set the margins too small,
     WordPerfect will automatically reset them to the minimum sizes.

     After setting all the numbers and measurements above, press
     (Enter) enough times to return to your document. The new form
     will be chosen in you document and ready to use, and when you
     need to select it again, you need only select the booklet from
     the Paper Size/Type list.


     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                       13

     PREPARING A BOOKLET FOR REORDERING
     ==================================

     When you run BOOKBILD, it will remind you of the steps covered in
     this section with this message:

          Before continuing, did you . . .
          Select a paper type containing labels 2 across by 1 down?
          Move all setup and tab set codes to Document Initial Codes?
          Add a Base Font code in Document Initial Codes?
          Restore all text to the Base Font before each page break?
          Break all multiple-page tables into single-page tables?
          Generate all tables, cross references, and indexes?

     In addition to these steps, you must also NOT have any new page
     codes in your document, as they will stop the booklet from
     retaining its formatting during the conversion process. Also,
     using cross-references tied to box numbers will not work, because
     the box numbers will change during the conversion. You can,
     however, use captions that are normal text, such as "Box 1" with
     no box number code in them--text doesn't change during
     conversion.

     SELECT A PAPER TYPE
     -------------------

     Before formatting your booklet, you must select a paper size and
     type, and that code must be placed in the Document Initial Codes
     area. Press Format (Shift-F8), choose (3) Document, (2) Initial
     Codes, Format (Shift-F8), (2) Page, (7) Paper Size. From the
     list, pick the one of the Booklet formats. (If you haven't
     created a Booklet format yet, see page 11.)

     Now you may format your document normally. You may choose
     graphics, tables, equations, cross references, and all other
     advanced features normally, with one exception: No feature should
     cross over a page break. For example, in a multiple-page table,
     rather than letting WordPerfect automatically break the table for
     you, end the table on each page, and start a new and separate
     table on the next page. Paired codes, such as [BOLD][bold], may
     safely cross page breaks.

     Remember: booklets are four pages long, or eight, or 64, but
     always a multiple of four pages. If you booklet isn't the right
     length, BOOKBILD will pad it with blank pages at the end to make
     it work.





     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                       14

     MOVE ALL CODES TO DOCUMENT INITIAL CODES
     ----------------------------------------

     Once all the formatting of your document has been completed, you
     must begin to convert it to a form that BOOKBILD can handle. The
     first step is to check the beginning of your document for margin
     codes, font codes, page numbering codes, and any other codes
     EXCEPT headers and footers. Move all the codes you find into the
     Document Initial Codes area. Here's how: Turn on Reveal Codes
     (Alt-F3), press Block (Alt-F4), use the arrow keys to block the
     codes to be moved, and press Move (Ctrl-F4), (1) Block, (1) Move,
     Format (Shift-F8), (3) Document, (2) Initial Codes, (Enter).
     Press Exit (F7) twice to return to the editing screen.


     ADD A BASE FONT CODE
     --------------------

     Normally, you would choose the beginning font for the booklet by
     using the Document Initial Base Font. That font choice will not
     consistently carry over into your reordered booklet, so place a
     font code inside Document Initial Codes.


     RESTORE ALL TEXT TO THE BASE FONT
     ---------------------------------

     No Base Font codes should be used in a booklet. Your work will be
     far faster and easier if you use paired styles to mark all of
     your font changes. If you must use Base Fonts, then restore the
     text to the original font at the bottom of every page.

     If you restrict yourself to paired style codes and paired
     attribute codes, such as [OUTLINE] Formatted Text Here!
     [outline], then you do not need to turn off the codes after every
     page. However, all OPEN styles and OPEN codes, such as [Tab Set],
     [L/R Mar:1:, 1"], or [Leading Adj:0.02",0"], must be reset to the
     original settings at the bottom of every page.

     GENERATE ALL TABLES
     -------------------

     Nearly there! If you use lists, cross-references, tables of
     contents, or any other feature from the Mark Text (Alt-F5) key,
     Generate the document by choosing Mark Text (Alt-F5), (6)
     Generate, (5) Generate Tables, etc., (Y) Yes.





     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                       15

     READY? RUN BOOKBILD!
     --------------------

     Save your file. Clear Document 2. Your formatted, generated, and
     saved document should be in Document 1.

     Run the BOOKBILD macro by pressing Macro (Alt-F10), typing
     BOOKBILD, and pressing (Enter), and pressing (Enter) at the
     reminder prompt if you really are ready to convert the document.
     Safety features have been built into BOOKBILD that will insist
     that you save before running the macro, because during the
     conversion process, the original document will be lost and
     replaced by the resequenced page set.


     PREPARING THE REORDERED BOOKLET FOR PRINTING
     ============================================

     After the conversion, you will still need to move headers and
     footers, and add Suppress codes to keep those codes from printing
     on pages where they don't belong. These remaining steps cannot be
     done with a macro, because only you, as the designer of your own
     document, can understand what you really want the finished
     product to look like. Starting with the file as created by
     BOOKBILD, move any header and footer codes to the new beginning
     page of the booklet, e.g. page 4 on a one-page booklet, and add
     Suppress codes as needed. Preview and print as you like, but if
     you must make editing changes that affect page breaks, make the
     editing changes in the original file (not the result file), and
     then save and run BOOKBILD again.


     PRINTING THE BOOKLET
     --------------------

     To print a booklet on both sides of the paper on any printer
     except a "duplex" or double-sided printer, you will need to run
     the set of pages through the printer twice. For the first run,
     press Print (Shift-F7), (5) Multiple Pages, press (O) Odd (NOT
     ZERO!), and press (Enter). WordPerfect will print only the
     physical odd pages of the booklet, and will ignore the [Pg Num:]
     codes. Next, feed the stack of pages back into the printer in the
     same order, and repeat the steps; this time choose (E) Even
     pages.

          (Note: the Odd and Even printing feature is not in all
          WordPerfect 5.1 manuals--it was added in the 3/30/90 interim
          release of WordPerfect 5.1)



     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                       16

     For vertically-folded booklets, feed the pages in the same
     direction (but opposite side up) as on the first pass. For
     horizontally-folded booklets, turn the stack end-for-end before
     printing.

     If your original document needed generation before printing,
     WordPerfect will ask whether to print, because changes were made
     since the last time the indexes and tables of contents, etc. were
     rebuilt. If you generated immediately before saving the document
     prior to running BOOKBILD, you should not generate again before
     printing the reordered document. 


     TALKING TO PRINTING COMPANIES
     -----------------------------

     Although most experienced printing firms will have handled
     booklets before, not all of their employees will understand how
     your pages must be oriented for your booklet to keep all the
     pages in order. Always make a mock-up copy for the printer, and
     fold it, and try to make it into a completed sample of how the
     finished brochure should look. The sample should be in addition
     to a set of unfolded pages, printed on one side only. The extra
     few minutes now will save you days later.

     If you choose either of the horizontally-folded formats, attach
     some notes to the sample pointing out that each page must be
     turned end-for-end before printing the second side.























     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                       17

     TROUBLE-SHOOTER'S GUIDE
     =======================

     1) Before I ran BOOKBILD, my document was eight pages long. Now
     it's longer, with some blank half pages.

     You probably had an open code for Base Font, or Left/Right
     Margins, somewhere in the body of the text. When the pages were
     re-ordered, those codes affected pages that should not have had
     those settings.

     Go back to your original document, and search each page for any
     and all codes, especially fonts and margins, and add codes at the
     bottom of the page that turn off, or restore, the changes made by
     those codes. If those fonts need to be on following pages, turn
     them on at the beginning and off at the end of every page. Try to
     convert your document into a series of individual documents that
     carry no codes over between pages unless they affect every page
     of the document.

     2) Some of my [TAB] codes turned into [RGT TAB].

     Your document probably contains both a change in Base Font, and a
     change in the tab settings, somewhere inside the document.
     WordPerfect makes that change automatically under some
     combinations of small tabs and large fonts. Look for a [Tab
     Set: ... ] code in the original document, and either remove it,
     or add another tab setting at the end of the page, that resets
     the tab positions to those in effect at the document's beginning.

     3) When I try to save my converted booklet, after running
     BOOKBILD, WordPerfect forgets my file name.

     That's right. It's not the same document anymore, and BOOKBILD's
     work cannot be undone. The filename was deliberately lost, so
     that you cannot accidentally replace the original document with
     the reordered version. Use the reordered version only for
     printing, and if you must save it, use a file name that
     identifies it as a reordered booklet, such as booklet.fin.

     4) My computer is old and slow, so using Odd or Even printing
     from the Multiple Pages option takes a week for each side. Hints?

     Edit your paper style and type for the booklet, and change
     "Prompt to Load?" to "Yes." Then print the entire document
     normally, and as each page comes out of the printer, turn it so
     that the second pass will print on the blank side, and feed it
     back in. From the Control Printer screen, you will have to press
     "Go" for each page to tell WordPerfect that the next sheet of
     paper is ready.

     All Rights Reserved                       (C) 1992-95 Jerry Stern




     B O O K B I L D   V. 1.1                                       18

     INDEX
     =====
          ASP . . . . . . . . . . . . . . . 3
          bonus . . . . . . . . . . . 1, 3, 4
          bookbats  . . . . . . .  1, 3, 4, 6
          columns . . . . . . . . . . . 9, 12
          editing . . . . . . . . . 8, 14, 15
          FAX . . . . . . . . . . . . . . . 3
          font  . . . . . . 7, 11, 13, 14, 17
          INSTALL.BAT . . . . . . . . . . . 8
          interim release . . . . . . . 8, 15
          International . . . . . . . 5, 6, 8
          labels  . . . . . . . . .  7, 11-13
          landscape . . . . . . . . . 7, 9-11
          LETTER  . . . . . . . . . 9, 10, 12
          memory  . . . . . . . . . . . . . 7
          ombudsman . . . . . . . . . . . . 3
          paper size/type . . . . . . . .  12
          PRINTDOC.BAT  . . . . . . . .  1, 8
          registration  . . . . .  1, 3, 4, 6
          SETUP . . . . . . . . . . . . 9, 13
          shareware . . . . . . . . .  1, 3-7
          support . . . . . . . .  1, 3, 4, 6
          trouble . . . . . . . . . . . .  17
          VENDINFO.DIZ  . . . . . . . .  3, 4
          Wood Clips  . . . . . . . . . . . 4
          WPG . . . . . . . . . . . . . . . 4
























     All Rights Reserved                       (C) 1992-95 Jerry Stern
