What is Machinist Mate?
~~~~~~~~~~~~~~~~~~~~~~~
Machinist Mate is for Machinists' & Tool Makers, 
But anyone who needs to calculate triangles, arcs, 
chords, compound angles, dovetails, bolt hole circles, 
sheet metal bend allowances, feeds & speeds, sprocket 
profiles, tapers, etc. will find this program useful. 
It will convert from inches to millimeters and from 
decimal degrees to degrees, minutes, seconds. All 
calculations are accurate to at least 7 decimal places, 
which is close enough for most machining.


THIS IS SHAREWARE: TRY BEFORE YOU BUY!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Machinist Mate is NOT free or public domain software. 
This is SHAREWARE, i.e., copyrighted software that 
you can "try before you buy". It may be freely 
distributed, provided this file (readme.txt) is included 
and none of the files are altered in any way.

You may try the program for an evaluation period 
of 30 days. After that time, you are required to 
register the software.

Unregistered copies are 100% functional. This is so you 
can try them out and decide whether they fit your need. 


WHAT DO YOU GET WHEN YOU REGISTER?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1. A Registration Code, allowing you to remove the 
   registration reminder and allows use after 30 days.

2. Information about the latest release of Machinist Mate.

3. Free technical support.

REGISTERING MACHINIST MATE
~~~~~~~~~~~~~~~~~~~~~~~~~~
You may register your copy of Machinist Mate with a 
check, money order or online at www.wadeproco.com.

Please, DO NOT SEND CASH!

Remember to include your Name, E-mail & 
the Install Code.

INSTALLING MACHINIST MATE
~~~~~~~~~~~~~~~~~~~~~~~~~~
You must run setup.exe included with the Machinist Mate.

Setup under early versions of Windows'95 will copy 
files to the directory but will give you an error when 
it tries to add a group. You will have to create your 
own shortcut.
 
Setup under Win'95c & later will copy files and add 
shortcuts to the start menu.

CONTACTING US
~~~~~~~~~~~~~
Machinist Mate is fairly simple and contains a fair 
amount of help. However, if you do run into problems or 
you have a suggestion.
Please contact us by e-mail at:

   bhwade@wadeproco.com

or write us at:

   Wade Programming Consultants
   P.O. Box 516
   Auburn, KY  42206

You may check for the latest Version at:

  http://www.wadeproco.com

SORRY, TECHNICAL SUPPORT IS FOR REGISTERED USERS ONLY

If we use your suggestion in our next release you may 
receive a free registered copy of the new release.


Disclaimer!
~~~~~~~~~~
We have tried to test this program thoroughly. However, 
bugs slip thru! We are not responsible for crashed 
systems, scrap parts, angry bosses, lost jobs, etc.

So, if you find a bug (or what you think is a bug), 
please contact us so that we can correct the problem.

The End.
