		******************************
		Welcome to MemoirTRACKER v1.51
		******************************
			README File

 This document contains important information about 
 MemoirTRACKER release v1.51. Please read the entire 
 document before installing MemoirTRACKER! You may 
 also want to print a copy of this file for future 
 reference.

 Contents
 ********
 1.  Installation
 2.  Upgrading from MemoirTRACKER v.1.3
 3.  Upgrading from MemoirTRACKER v.1.4 or v.1.5
 4.  What's New in MemoirTRACKER v1.51
 5.  Troubleshooting
 6.  Uninstallation


 ****************
 1.  Installation
 ****************
 
 The system requirements for installing MemoirTRACKER are:
    Windows 3.0, 3.1, 3.11, or Windows 95.
    8MB memory or more.
    386 DX or better.
 
 a) From floppy disks :

 Installing on Windows 3.0, 3.1, or 3.11:
    1. Insert MemoirTRACKER - Disk 1 in your floppy disk 
       drive (A: or B:).
    2. Click on the File menu of your Windows Program Manager
       and select Run.
    3. Type A:\SETUP (or B:\SETUP) then click OK. 
    4. Follow the directions on the screen. 

 Installing on Windows 95:
    1. Insert MemoirTRACKER - Disk 1 in your floppy disk 
       drive (A: or B:).
    2. Choose Run from the Start menu.
    3. Type A:\SETUP (or B:\SETUP) then click OK.
    4. Follow the directions on the screen.

 b) From single self-extracting file

 Installing on Windows 3.0, 3.1, or 3.11:

    1. Click on the File menu of your Windows Program Manager
       and select Run.
    2. Enter the full path name of the single self-extracting 
       file ( memo151.exe).
    3. Follow the directions on the screen.

 Installing on Windows 95:

    1. Double click the single self-extracting file 
       ( memo151.exe ).
    2. Follow the directions on the screen.


 ****************************************
 2.  Upgrading from MemoirTRACKER v.1.3
 ****************************************

 You have two options to do the upgrade:
 a) Keep MemoirTRACKER v.1.3
    Install MemoirTRACKER v1.51 at a different directory 
    from the directory that version 1.3 was installed.
 b) Do not keep MemoirTRACKER v.1.3
    First, uninstall version 1.3 (refer to the Read Me 
    file in MemoirTRACKER 1.3 ), then install version 1.51 
    following its installation instructions. 
 
 Note: The database in version 1.3 and 1.51 are not 
       compatible. You will not be able to transfer your 
       1.3 data into 1.51 Database.
 
 
 *******************************************************
 3.  Upgrading from MemoirTRACKER v.1.4 or v.1.5
 *******************************************************

 You have two options to do the upgrade:
 a) Keep MemoirTRACKER v.1.4 or v.1.5
    Install MemoirTRACKER 1.51 at a different directory
    from the directory that the previous version was installed.
 b) Do not keep MemoirTRACKER v.1.4 or 1.5
    Exit MemoirTRACKER and its Alarm if they are currently 
    running. Install MemoirTRACKER v1.51 at the same directory
    as the previous version was installed. The data you entered 
    in previous version will be automatically transferred to v1.51. 

 If you wish to evaluate v.1.51 first before purchase/upgrade,  
 you should select option a).  If you are a V.1.5 user and want
 to update your program to this free upgrade, you should select
 option b).

 
 *************************************
 4.  What's New in MemoirTRACKER v1.51
 *************************************

 - Enhanced! Printing in Calendar 
 Now you can print Daily, Weekly or Monthly schedule in 
 different sizes of printouts.

 - Enhanced! Printing in Address Book
 Now you have choices to print either Report style or 
 Card style address book in different printout sizes.

 - New! Address Book Import
 You can import your address book data from other PIMs into 
 MemoirTRACKER.

 - New! Printing of Medical expenses
 Directly print out the expenses table as you see it 
 on the PC screen.

 - New! Printing of Auto Repair and Maintenance Log
 Directly print out the Repair and Maintenance Log 
 as you see it on the PC screen.

 - New! Remind you of relatives' and friends' Anniversary dates
 Automatically transfer your relatives' and friends' 
 anniversary date into the Calendar.
 

 *******************
 5.  Troubleshooting
 *******************

 1.  I can not start MemoirTRACKER, after completion of 
     initial installation.

     Restart your computer and try to run MemoirTRACKER 
     again.

 2.  What should I do if my current installation is not 
     successful or aborts before completion?
     Simply start the installation again. Click "OK" when 
     the message pops up saying that "the installation program 
     detects you have a version of MemoirTRACKER 
     installed, install at the same directory".

 3.  What should I do if my current uninstallation is not
     successful or aborts before completion ?
	
     Re-install MemoirTRACKER again at the same directory,
     then run "Uninstall Memoir Tracker" 
     to uninstall.

 4.  When I am trying to run MemoirTRACKER, I see an
     error message stating "Application Error. Exception 
     Edatabase Error in module LORGANIZ.EXE at xxxx : xxxx.
     An error occurred while attempting to initialize the
     Borland Database Engine." What should I do?

     You may have another BDE installed in you system 
     before. Check WIN.INI file (in Windows directory),
     look for [IDAPI] section, delete it, then save and 
     close the WIN.INI file. Reboot your system then 
     install Memoir Tracker again.

     The [IDAPI] section looks similar to the following: 

		[IDAPI]
		DLLPATH=C:\IDAPI
		CONFIGFILE01 = C:\IDAPI\IDAPI\.CFG

     Your path name may not be the same as illustrated 
     above. 

     Note: Before you start doing the changes, make a
     Backup of the WIN.INI file, the entire directory 
     specified in DLLPATH and the file specified in
     CONFIGFILE01.  In this way, you can restore the
     System to its original state should the installation
     Is unsucessful.			

 5.  I am getting a message saying that my "Lock Files
     are too big" when MemoirTRACKER is running. What 
     should I do ?

     Exit MemoirTRACKER and Memoir Alarm. Check if either
     one of the file named PARADOX.LCK and PDOXUSRS.LCK exists in 
     the Memoir\db directory. If so, delete them.

 6.  When I am trying to install MemoirTRACKER, the 
     following messages pops up "Could not merge BDE 
     configuration files C:\temp|~glfob27.tmp and 
     C:\idapi\idapi.cfg into C:\idaipi\idaipi.cfg". What 
     should I do ?

     Just remove the C:\temp|~glfob27.tmp and C:\idapi\idapi.cfg files, 
     then do the installation again.

 7.  I began entering information into the Wallet section and 
     get a warning message stating "The expirations date has 
     passed. Please enter again!". What did I do wrong?

     You have to use four digits for the year beyond 1999. 
     For example: if the expiration date is July 31, 2002, 
     enter the date as 7/31/2002. If you enter the date as 
     7/31/02, the program will take it as July 31, 1902. 
     That's why you got the warning message.

 8.  When I am trying to run MemoirTRACKER, I see an error 
     message stating "The database version is not correct. The
     software may not work properly.....". What should I do?

     You may have other program that is also using Borland 
     Database Engine. Exit other programs, uninstall 
     MemoirTRACKER, reboot your system, then try the 
     installation again. 
     
     
 ******************
 6.  Uninstallation
 ******************

 1.  If you would like to keep the MemoirTRACKER data
     for future use, please make a database backup.
     Go to the home page of the program, select backup
     From the File menu.

 2.  Exit the Memoir Alarm, if it is 
     running in the background.

 3.  For Windows 3.0, 3.1 or 3.11, run the "Uninstall 
     Memoir Tracker" program in the "Memoir Tracker 1.51" 
     program group. 
     For Windows 95, run "Uninstall Memoir Tracker" 
     from "Start" -> "Programs" -> "Memoir Tracker 1.51" menu. 

    
