PANASONIC KX-TD1322 control center

  This program is intended for programming the hybrid office stations PANASONIC KX-TD1232  (do not use to program analog station KX-T1232!).
 To work with the program You need correct cable to connect the station and the computer. 'Null-modem' cable is used here (see below).
 You need computer with the at least 286 CPU and equipped more than two Mbytes of memory. Microsoft Windows 3.1/3.11 or Windows 95 should be already installed on.
Program occupies approximately 1 Mbytes of hard disc space.
 To begin installation start program INSTALL.EXE. You will be offered to enter a subdirectory, where package will be installed (by default C:\PANSONIC) and select, will be fonts installed. (fonts HELVECYR.FON and VGASYSC.FON are installed; usually this option is on).
 After successful installation just click on phone icon (locates in the folder KX-TD1232) and start program. Pay attention to set valid parameters in the point Settings of the main menu. 
 If You encountered some difficutilies - just consult with build-in help system.

Program status is shareware - see file HOWTOBUY.WRI about details.
Demo version is freely distributable.
In demo version You can read current PBX state, but writing back is enabled only in the fully functional version . The only parameters You can change using demo version are PBX time and date.

Remarks and offers You may report to author by E-mail:
	oleg@interelf.msk.su

Latest version of the software is available at:
http://www.aha.ru/~akarpov

You are welcome with suggestion about collaboration and/or creation similar
program for other model of PANASONIC PBX!

 Cable to connect PBX and computer

Cable 25 - 25 pin         Cable 25 - 9 pin
1 - 1                              2 - 2
2 - 3                              3 - 3
3 - 2                              4 - 8
4 - 5                              5 - 7
5 - 4                              6 - 4
6 - 20                             7 - 5
7 - 7                              20 - 6
20 -6
