***IMPORTANT***
Adjusting computer time (+/-) after installation will shorten evaluation (temporary)
license by the amount of adjustment.

This is a shareware program and all the features can be used for two weeks after initial
installation. If you need more evaluation time, read below about extending temporary license.

===================================================================================================
xRepath ver. 2.4.0.5
===================================================================================================

Thank you for evaluating our software.

Visit us at http://www.intelcad.com in order to:

* Download the latest version of this program

* Find more of AutoCAD related shareware, eg. DWF=>DWG converter.

* Try more tools for massive processing of DWG files without AutoCAD, such as attribute
  extraction tool, standalone DWG audit program, DWG viewer

* Check out our unique, worldwide AutoCAD DWG repair service for "hopelessly" corrupted
  drawings that cannot be recovered with AutoCAD based methods. The program that you are
  evaluating is a sample of our in-depth knowledge of DWG and DXF format.
  Do not despair, if the only copy of valuable DWG is corrupted, visit our recovery page
  at http://www.intelcad.com

See you there :)

Alex Januszkiewicz -> alexj@intelcad.com
President
IntelCAD Systems and DWG Data Recovery Services -> http://www.intelcad.com

===================================================================================================

How to use it:

1. Before you use the program, make sure that the copy you have is up-to-date.
   For latest update, patches, bug fixes and version history visit http://www.intelcad.com

2. To run the setup and evaluate the software you need LOCAL administrator's rights
   on your computer (required by temporary licensing program). Users trying this program
   in large, corporate settings, with limited user rights, may have to ask system
   administrator to give them more rights to local computer for the period of evaluation.
   Once software is registered, you don't need these rights..

3. Run axr2inst.exe to install the software.

4. While running installation, xRepath help is started, so that you can read more detail about
   the operation of the program

5. Once installed, use the program by starting it from windows <Start> menu:
   Start->Programs->xRepath->xRepath.exe

6. Press <Help> on xRepath dialog for detailed information about how to use it.

==================================================================================================

General Description
-------------------

xRepath is a program in IntelCAD BLITZ! series of standalone power tools for processing AutoCAD
drawings. Its purpose: provide means of easy and fast changing XREF and IMAGE paths in drawing
files throughout the project or entire drives filled with thousands of drawings.
xRepath can also generate the listing of all reference files (XREF and IMAGE type) from all
processed drawings in the form of Excel spreadsheet.
This last feature will allow you to organize and review reference (XREF and IMAGE) paths
throughout the whole project.

The unique characteristic of this program is, that it doesnt need AutoCAD to access
and modify DWG files. Another outstanding feature is its processing speed. Where it
would take about 24 days for AutoCAD batch/lisp utility to load, modify and save 10000 drawings
on a larger project (assuming 3.5 min. /dwg avg.) , xRepath will do that task in a few hours.
And for everyday needs of sending some drawings with xrefs to the client, it will modify your
100 megabytes of drawings in one or two minutes (instead of few hours with lisp/AutoCAD based
solution). An ideal tool when changing drive mapping, moving the project to another drive or
returning project to the client.

xRepath can process drawings from R11 to AutoCAD 2000. Each drawing after processing is
saved in its original format (that is R12 drawing will be saved as R12, R13 as R13 etc.)

Check out other unique products from IntelCAD Systems. To keep up-to-date with our new 
developments, please visit often our downloads section at http://www.intelcad.com.
Each of the products will be offered for free evaluation, so that you
can try all its features with no hassle and then decide, if its worth buying.

If you have certain particular need in  terms of standalone processing of DWG files,
please let us know. Its quite possible that we will be able to address your need
in BLITZ! family of DWG tools.

Thank you for your interest in this program. If you find any flaws in it, or see how it
could be made better, we welcome your suggestions. Valid suggestions can be implemented
and distributed within few weeks.


==================================================================================================

Limitations of Evaluation (temporary) License
---------------------------

The restrictions in this version are minimized:

* 10 drawings can be processed with each press of <Run> button (rather than 50000 in
  full version, however there is no limit how many times you will run it on different
  sets of drawings.
* specified time limit (2 weeks)after which temporary license will expire. It can be extended
  afterwards, see "How to extend the license" below.
* Command line parameter passing is available only for registered users

==================================================================================================
How to extend the license or obtain permanent authorization:
---------------------------

It's easy. All details are provided in xRepath help file. If you tried another version before
and you license already expired, we will extend the temporary license if you contact us by
e-mail with the serial number information (read Help on Temporary License for details).

==================================================================================================

version 2.4.0.5 , current (Sep. 25/2000)


1.  Added progress meter to DLF generator.
2.  Optimized for maximum processing speed.
3.  Fixed small memory leak that occurred when processing drawing files located in
    directories having very long names. 

version 2.3.0.2 (Sep. 10/ 2000)

1.  Added option of passing command line parameters for non-interactive processing.

version 2.2.0.9 (Mar. 10/ 2000)

1.  Fixed re-pathing bug that crept into ver. 2.2.0.7 when we added IMAGE support.

version 2.2.0.7 (Mar. 06/ 2000)

1.  Added re-pathing of IMAGEes attached to the drawing
2.  Added the option of creating Microsoft Excel spreadsheet *.CSV file that reports
    attached xrefs and images
3.  Added <Action> menu for specifying process to be performed on drawings from the list.

version 2.1.0.0 (Jan. 09/ 2000)

1.  On users request, the possibility to change whole path, including file name
    has been added

version 2.0.0.1

1.  Added support for AutoCAD2000 DWG files. Maximum length of xref path increased
    from 80 to 512 characters.
2.  Fixed bug that caused unresolved xrefs to be ignored by the program.

version 1.0.5.1

Initial release.

===================================================================================================

How to buy
----------

Feel free to explore this program within temporary license time limit, as well as
distribute it to other users. When time limit expires, you can receive FREE extension
time (within reasonable limits).

Any questions/comments regarding performance, pricing, features to be added or bugs,
please direct to support@intelcad.com. We will appreciate any input.

To buy licensed software visit xRepath page at http://www.intelcad.com, copy and
print order form, fill it and pay as per instructions.

==================================================================================================

Disclaimer
----------

This program is delivered on "as is" basis and in no event shall IntelCAD Systems
be held liable for any type of damages resulting from the use of this program.
Usage of this software constitutes your agreement to the above terms. If you don't
agree, delete this software from your system

BLITZ!, xRepath are trademarks of IntelCAD Systems.