Data2Quick V.2.00405   By

Genesis One Technologies, Inc.
7470 San Clemente Pl
Boca Raton, FL 33433
http://www.genesis-one.com
rmiller@genesis-one.com

Data2Quick makes use of expanded system memory by increasing Microsofts operating systems (95,98,SE,ME) read ahead capabilities. Data2Quick will work with as little as 32k of memory but is optimized for systems with 64k and more. Written in C.
 
Windows 9x systems read from the disk in a maximum of 64k. Data2Quick's dynamically sizing algorithm increases that read ahead to a maximum of 1M. Data2Quick loads programs significantly faster, and performs a full range of Hard Disk activities 25% to 35% faster than those without it. 
 
It has been extensively tested and has been widely used by major PC manufacturers. The results of Ziff Davis WinBench 97 , Winbench 98 and Winbench 99 disk tests all show that Genesis One Technologies' Data2Quick device driver significantly improves disk performance.

DataQuick is shareware and as such it may be distributed freely. A 7 day evaluation period is provided and if you decide to keep the program you may purchase it through our website http://genesis-one.com.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

KNOWN ISSUES!!!!!!!!!!!!!

Data2Quick was designed for Windows default settings. Any other disk, cache, memory management program or any other program that has changed the default settings may cause your computer to run slower or not show any improvement after installing Data2Quick. If this happens, simply uninstall Data2Quick. 
Uninstalling the other programs may not return Windows to its' default settings and reinstalling your windows operating system is recommended before trying Data2Quick again.

You should beware of any program that claims to improve performance if they do not offer 3rd party proof of that improvement.

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Instructions for installing Data2Quick for Windows 9x

1. You may install from a floppy or hard disk.

2. Press the "Start" button on the Windows 95 or 98 status bar if using a
   floppy.

3. From a floppy select "Run...".

4. Enter "A:\Data2Quick.exe" 

5. If you wish to install from the hard drive just copy the files to
   a temporary directory and execute "Data2Quick.exe"

7. Reboot the machine.
